REPAIRS TO CERTAIN ROADS AND ROAD SIDE FURNITURE AT RAMBAN, BANIHAL AND PATNITOP UNDER AGE (I) BHALRA

Repair to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc, cutting around edges to at least 25mm in depth, making good by applying tack coat with bituminous primer @5Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 Cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chipping etc) depth of potholes exc 30mm complete all as specified.

M&L for premix bituminous macadam laid with mechanical paver and material transported in tipped (covered) vehicle and rolled and compacted to required gradient and camber with tandem vibratory roller (consolidated thickness 75mm or less) using binder content of paving bitumen (VG-30) by 4% weight of total mix, complete all as specified and directed.

Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (paving bitumen of viscosity Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix bituminous semi dense concrete 30mm consolidated thickness with 5.5% binder content by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and with tandem vibratory roller, complete all as specified and as directed. Note : The minimum consolidated thickness will be 30mm. However, it may increase at places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting their rates.

Marking lines, dashes arrow etc of any description not exc 10cm width/girth and not less than 2.50mm thickness on road surface using hot applied thermo plastic road marking paint mixed with radium glass beads @250 gms/Sqm with automatic machine to provide reflectivity and night vision (approximate temperature being 2000 celsius at the time of laying including cleaning the surface by removing all dirt, dust & all other foreign matters, demarcation at site and trafiic control, complete all as specified and directed. Note : Thermo Plastic road marking paint shall be Make : ASIAN/STP Ltd

S&F solar road stud having 3 LED's of colours red/yellow/blue/green to a side (total 6 Nos) housed in a tough pressure dia casted aluminium alloy of size 125x125mm of height 20mm with built in stem nail 37x37x55mm long for fixing with epoxy, LED's solar cells battery & light sensor well protected in side tough unbreakable poly carbonate transparent sheet roof system workable for 3-4 (nights) after full charge in 8-10 hours by hammering CAT part No 03-01, RSBN, including removal of old unserviceable stud. Make : Dark Eye or equivalent in Sinor/Greenlite/Oscar

S&F aluminium body cat eye's dual directional relfective cat eye of aluminium casted stud 100mmx100mm having plastic ABS strip containing 31 mini retroreflective glass beads of colour white/red/yellow side provided with steel zinc pasted nails of dia 12mm and of length 120mm by hammering or epoxy resign including removal of old unserviceable stud. Make : Dark Eye or equivalent in Sinor/Greenlite/Oscar