SPECIAL REPAIR TO BLDG NO A/4/116 AT HQ INF DIV UNDER GE PANAGARH

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean radious built in CM (1:6) complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls and ceiling, chajja, landing etc including racking of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:6) on internal surfaces of brick masonry wall finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:4) mixed with water proofing compound on external surfaces of brick masonry wall finished even and and smooth with out using extra cement (water proofiing item to be paid separately) complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for 5mm thick rendering in CM (1:3) on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for completely removal of existing treatment from wall surface and applying interior putty where the plaster surface rough during preparation and applying Two coats of Oil bound distemper on wall surface over a coat of alkali resistant complete all as specified and directed.

M&L for complete removal of existing surface preparation of old plastered surface of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

Dismantling of Asbestos cement (corrugated, semicorugated) sheet in roof covering complete all as specified and directed.

M&L Pre-painted galvatume aluminum zinc coating AZ-150 GSM GI based fullly/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating AZ-150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridges fixed with self tapping screws complete all as specified and directed.

M&L for flat iron fillets (for securing wire mesh, CGI Sheets etc.), Hand rails, half round or other steel section including embedding in concrete and screwing etc, wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Taking down chowkats or frame n.exc 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutter(s) (without taking off shutters from the frame),complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ chowhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ howkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge.

S&F 35mm thick Factory made single extruded WPC (Wood Polymer Composite) solid panelled decorative flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engr-In-Charge. (Note: stainless steel butt hinges and necessary Stainless Steel screws shall be paid separately)

All as per item No 20.00 but 30mm thick wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engr-in-Charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, locking arrangement etc all complete as per architectural drawings and the directions of Engr-in-charge

S&F 4mm thick sheet glass ordinary quality with oil putty in square n.exc 0.5m in each pane complete all as specified and directed..

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 extruded aluminium alloy with alvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F for 150 mm aluminium extruded handles, fabricated type anodised complete all as specified and directed.

S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy complete all as specified and directed

S&F floor door stopper of aluminum body 140 mm long and tongue with rubber shoes complete all as specified and directed

Dismantling of wall or ceiling boards of any thickness including cover fillets complete all as specified and directed.

S&F 605mm x 605mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminum angle & Tee arrangement with and incl fixing cleats screws etc complete all as specified and directed.

S&F Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified and directed.

S&F 6mm thick (non asbestos fiber) designer building boards fixed in aluminium frame work in ceilling flat or sloping with screw complete all as specified and directed.

Demolition of cement concrete (un-reinforced) not exceeding 15 cm thickness of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded coarse aggregate) in flooring with nominal reinforcement complete all as specified and directed.. (Note: Reinforcemnt will be measured and paid separately)

M&L for joint free Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement complete in floors, over cement screed bed 15mm thick in CM (1:6), including including dismantling wall tiling and cement mortar bedding complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over cement screed and jointed over screed bed or bedding layer of mortar 20mm thick in CM (1:6) for laying floor finish complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar (1:3), on brick or concrete surface complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for pre-polished coloured chequred cement tiles 300X300x25mm thick set and jointed and pointed in neat cement slurry with gray cement and pigment and over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 75 mm thick PCC type C-1 1:3:6 (using 20 mm graded stone aggregate) finishing the as in Plinth protection surfaces even and smooth without using extra cement complete all as specified and directed..

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for cement Concrete, 1:2:4, type B1 (using 20mm graded stone aggregate) as in bed block, coping, lintel upto 1.50 m span, cills, kerbs etc complete all as specified and directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as specified and directed.

S&F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheer strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed..

S&F as in repair vitreous China squatting pan, ' Orissa patteren, size 580mm x 440 mm white, with integral footrests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 550mm x400mm (for hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F Vitreous China urinals, bowl type (back or corner wall type), of size 465mm x 355mm x 265mm white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repairs 15mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed

S&F in repairs 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed..

S&F PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.

S&F grating square 150mm size of CP complete all as specified and directed.

S&F 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets) complete all as specified and directed. Make : Hindware/Parryware/Cera

S&F in repairs bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed. Incl dismantling of slat glazed or AC pipe complete all as specified and directed.

S&F PVC bends with oval acess door (any radius) for 75mm bore PVC pipes complete all as specified and directed.

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members weight n.exc 4.0 Kg/Sqm complete all as specified and directed

S&F chicken wire mesh netting 25 gauge 20mm mesh cut to desired length and fixing with nails on the crack portion tightly complete all as specified and directed

Cutting chases, making holes in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth complete all as specified and directed

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in 10mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified and directed by Engr-in-Chanrge.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and direded.

S&F door closer hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed

M&L for demolition of Concrete (RCC) of any description and in any position not otherwise specifically provided incl reinforcement cut as required to facilitate for demolition for complete all as specified and directed

M&L for RCC Type B1 1:2:4 (using 20 mm graded stone aggregate) for chajjas and the like complete all as specified and directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete complete all as specified and directed

Mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for repairs to crack portion with Jacktting technique, taking down the extg plaster up to brick wall surface of min 200mm wide, cleninng the loose particles on surface of brick work along the length of the crack and filling the gap/crack area with PCC 1:1.5:3 type A0 using 12.5mm aggregate up to brick surface and inserting the welded mesh of size 25X25X2mm dia along the crack on both sides of the wall surface fixed with, drilling holes 10mm dia on either side of the crack by means of drilling mechane trouoght the full width of the wall @ 25cm c/c and insert 8/10mm dia rod in the drilled holes, welded with horizonal rod to with hold the welded mesh and applying grit plaster 1:1:2 using 4mm and down aggregate finished even and smooth with out using extra cement complete all as specified and directed . Note: Reinforcement and welded mesh will be measured and paid separately.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) incl necessary form wok complete all as specified and directed by Engr-in-Charge

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

E/M PORTION Taking down carefully aluminium conductor point wiring (light , fan, socket or power) complete including fittings such as switches, ceiling rose, pendents, regulators sockets etc and removing (except those to be reused shall be kept in safe custody at the site) and making good disturbed surfaces of walls, floors etc to match with the existing complete all as specified and directed.

M&L point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

All as per item No 82.00 above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed.

All as per item No 82.00 above but 5 Amp socket on same board with other switches complete all as specified and directed.

M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.

S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified.

S&F socket outlets 2 in 1, 5 pin, 5/6 Amps flush type 230/240 V complete all as specified and as directed

S&F switch socket combination 5 in 1, 6 pin, (5/16 Amps) flush type controlled by one switch complete all as specified and as directed

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and as directed

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and as directed

S&F lamp holder,PVC/polycarbomate type with back plate straight of angle suitable for LED lamp complete all as specified and as directed

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed Make: Usha/Havells/Bajaj/CG

S&F submain two single core 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed. (Note: Three runs cable and PVC casing caping will be measured as a single unit)

S&F submain two single core 6.0 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 6.0 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed. (Note: Three runs cable and PVC casing caping will be measured as a single unit)

S&F wall LED security light fittings 25 watt, 230 volts, minimum lumn output 100 lumen/watt, made up of pressure dia cast housing with prismatic polycarbonate difuser and industrial LED with secondary optic and IP-65/66 including necessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete allas specified and directed. Make : Havells/CG/Bajaj/Jaquar

S&F LED light fitting 1 x 20 watt box type with same make LED tube rod side connection AC decorative box type 4' long with driver, holder including LED tube connecting up with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed. Make : Havells/CG/Bajaj/Jaquar

S&F recessed mounted 2' x 2' LED lminaire 36 watt for grid ceiling minimum lumen output 100 lumen/watt pre-treated CRCA frame powder coated with difused profiled including necessary connection complete all as specified and directed. Make : Bajaj/CG/Havells/Jaquar/Philips

S&F LED battem mirror light fitting 1 x 10 watt box type, Polycarbonate, cool day light, 6500K,1000 lumens with accessories complete all as specified and directed. Make: CG/Crompton/ Havells/ Jaguar/Bajaj

Supply only ventilating metalic body exhaust fan 300 mm sweep 230 volt AC, heavy duty complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.

S&F epoxy powder coated sheet metal enclosure for TPN DBs, 4 ways, double with mounting fitted with bus bar, DIN channel , neutral link and incoming contact, IP-43 complete all as specified and as directed Make : ABB/Legrand/Hager/Schneider

S&F epoxy powder coated sheet metal enclosure for DBs, single door, Single pole and neutral, 8 ways, with mounting fitted with 200 Amps rated bus bar, DIN channel, neutral link and incoming contact complete all as specified and as directed Make : ABB/Legrand/Hager/Schneider

S&F MCB TPN 40-100 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessary connection all as specified and directed.

S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. Make : ABB/Legrand/Hager/Schneider

S&F MCB SP 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. Make : ABB/Legrand/Hager/Schneider

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 25 x 4 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, aarmoured heavy duty electric cable with aluminium conductor , 1100 volts grade , correctional area 35 sqmm 3½ core including taking out in trenches complete all as specified and directed Note:- Excavation,sand cushioning, brick will be measured and paid separately.

M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note : Punned thickness 18 cm shall only be considered for payment

Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.

S&F Pipes galvanized, 50 mm bore “light grade” supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement complete as specified and directed

Taking up or own carefully steel tubing 25 mm bore with all fitting including gate valve from in ternches, wall, floor & ceiling and kept in safe custody at site for refixing of GI pipe complete all as specified and as directed. (Note: Excavation and earthwork will be measured and paid separately)

S&F Pipes galvanized, 25 mm bore “Medium grade” supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.

S&F gun metal, gate valve, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fix complete all as specified and directed.

S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top minimum three layer) confirming to relevant IS complete including provision of all inlet outlet overflow and drain pipe fitting including taking down complete all as specified and directed by Engineer in Charge Make : Vectus/Sintex/Prayag

S&F in repair high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 20 mm dia with fly nut complete all as specified and as directed.

M&L for cutting existing steel tubing for alternation or addition of size 40 to 50 mm dia GI pipe complete all as specified and directed.

HIGH HILLS INFRA

RUBY BUILDERS AND CONSTRUCTION CO

vs construction

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP

rahul enterprise

subash chander bahl

M/S Konar Engineering

SAIBABA ENTERPRISE

NATIONAL CONSTRUCTION CO

M/S SWAPAN KUMAR MONDAL

ROY ENTERPRISE