PROVN OF WALKING PATH INSIDE THE CHILDERN PARK NEAR OFFR MD ACCN OF NCO ACADEMY AND STORAGE SHED IN BSO YARD MES OFFICE AT DHANA MIL STN.

Amount

Surface excavation n.exc 30cm deep and getting 15cm deep and getting out any type of soil, complete all as specified and directed

Excavating in trenches not exc 1.5 Mtr wide & not exc 1.5 Mtr depth for foundation etc or for shafts, wells, cesspits, manholes etc and getting out Hard/dence soil, complete all as specified and directed

Returning, filling in trenches including spreading, levelling, watering and well ramming in layer n. exc 25 mm all as specified and directed by Engineer-in-Charge.

Removing excavated material exceed 250 m but not exceed 500 m depositing where directed at a level not exceed 1.5 m of the starting point complete all as specified and directed

Material & Labour for PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) in foundation filling and mass concrete, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces, complete all as specified and directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface complete all as specified and directed.

Material & Labour for RCC M25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as specified and directed

Material & Labour for RCC M25 as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Material & Labour for RCC M25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Material & Labour for Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Material & Labour for Mild steel bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Material & Labour for Mild steel bars 5mm and over upto and including 10mm dia in stirrups spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Material & Labour for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement Mortar 1:6, complete all as specified and directed.

Material & Labour for Rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement), complete all as specified and directed.

Material & Labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces using integral water proofing compound 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as directed and directed. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified & directed.

Material & Labour for rendering 5mm thick in CM (1:3) on concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.

Material & Labour for Moorum/Red bajri filling in floors/pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed/ rolled including watering to required level and gradient, complete all as specified and directed.

Material & Labour for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

Material & Labour for 50 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra cement, complete all as specified and directed

Material & Labour for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing/Plinth protection, complete all as specified and directed

Material & Labour for 100 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing, complete all as specified and directed

Material & Labour for 150 mm thick Cement concrete type B 2, 1:2:4 (using 40 mm graded granite stone aggregate) in hard standing finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Supply & Fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde- E- 250) quality-A, complete all as specified and directed.

Supply & Fix Rolled section as in framing for cladding, glazing, and the like fixed with angle cleats and connecting plates, etc., complete all as specified and directed.

Supply & Fix Base Plate (Plain or chamfered ) vessels, square cut or notched ordinary and counter sunk cutting holes, with riveted, bolted, or welded attachment, complete all as specified and directed.

Supply & Fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or J hook all as specified directed by Engr - in - Charge.

Supply & Fix Pre- painted galvalume aluminum zinc coating GI based Plaint steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hook all as specified directed by Engr - in - Charge.

Material & Labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

Material & Labour for preparing newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed

Material & Labour for Precast designer coloured heavy duty full body paving tiles (factory made) of size 300mmx300mm x 12mm, top layer glazed made in any type of cement and pigment, in required patterns as approved by GE in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, complete all as specified & directed. Make :- Pavers of Kajaria / Dura Stone of Somany

Material & Labour for screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes complete all as specified & directed.

Providing precast cement concrete solid building blocks Type B1 1:2:4 (using 20 mm graded granite stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls, complete all as specified and directed

Material & labour for preparation of New or previously untreated plastered or concrete surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of primer complete all as specified and directed.

Supply & Fix 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches, complete all as specified and directed.

M/S JAINENDRA KUMAR JAIN

CREATIVE CONSTRUCTION

Pandey Construction and Engrs

m/s mahendra kumar khare contractor