Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 LAccepted-Finance | ₹2.4 L | L1 | Accepted-Finance Lowest bidder |
| 2 | L2₹2.5 L+₹11,984.92 (4.99%)Accepted-Finance | ₹2.5 L+₹11,984.92 (4.99%) | L2 | Accepted-Finance Highest bidder |
| Sl No | Description | Qty | Unit | S.B.D. CONSTRUCTIONS L1 | Sree Velan & Co L2 |
|---|---|---|---|---|---|
| 1.00 | Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/ m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. | 23.57 | M2 | 4,085 ₹96,283.45 Lowest | 4,188 ₹98,711.16 |
| 2.00 | Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: [email protected] kg/m and Bottom rail: 100x44.45x2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,Alu.Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Eachs., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers.. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete. Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. | 2.1 | M2 | 7,020 ₹14,742 Lowest | 7,250 ₹15,225 |
| 3.00 | Supplying and fixing of plywood table of thickness 16mm with drawer covered with mica sheet fixed by using L clamp of size 1/2". The rate is inclusive of cost of fevical, drawer wheel and fixing charges, transportation charges and all other incidential charges, handling charges etc., Complete complying with standard spcification. | 6 | Nos | 7,480 ₹44,880 Lowest | 8,000 ₹48,000 |
| 4.00 | Manufacturing and Supplying of S‘ Type Chair with wood frame nylon wire knitted seat & back with Arm: Made out of 1” round ERW pipe 14G pipes with one coat of red oxide and 2 coat of enamel paint finish. The rate includes cost of all materials, transports and other incidential and conveyance charges etc., complete complying with standard specification and as directed by the departmental officers. | 6 | Nos | 3,150 ₹18,900 Lowest | 3,200 ₹19,200 |
| 5.00 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) | 115.6 | M2 | 175 ₹20,230 Lowest | 200 ₹23,120 |
| 6.00 | Supplying and fixing of Vertical blinds in Ordinary etc. complete complying with standard specification and as directed by the departmental officers. | 9.36 | M2 | 900 ₹8,424 Lowest | 1,000 ₹9,360 |
| 7.00Sub Total | |||||
| 8.00 | GST 18 % | 1 | cum | 36,622.7 ₹36,622.7 Lowest | 38,450.91 ₹38,450.91 |
Tender Value
₹2.5 L
EMD Value
₹2,450
Closing Date
9 Sept 2026, 3:00 pmClosed
Executive Engineer
Executive Engineer, PWD., Buildings C and M Division, Villupuram.
Providing E-Sewa Kendra in Combined Court building at Tindivanam in Villupuram District
2026_PWD_700729_1
02-02/2026-2027
Open Tender
Civil Works
Item Rate
Tindivanam
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹2,450
9 Sept 2026
3 Sept 2026
9 Sept 2026
3 Sept 2026
9 Sept 2026
3 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/ m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. | 23.57 | M2 | - | - |
| 2 | Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: [email protected] kg/m and Bottom rail: 100x44.45x2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,Alu.Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Eachs., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers.. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete. Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. | 2.1 | M2 | - | - |
| 3 | Supplying and fixing of plywood table of thickness 16mm with drawer covered with mica sheet fixed by using L clamp of size 1/2". The rate is inclusive of cost of fevical, drawer wheel and fixing charges, transportation charges and all other incidential charges, handling charges etc., Complete complying with standard spcification. | 6 | Nos | - | - |
| 4 | Manufacturing and Supplying of S‘ Type Chair with wood frame nylon wire knitted seat & back with Arm: Made out of 1” round ERW pipe 14G pipes with one coat of red oxide and 2 coat of enamel paint finish. The rate includes cost of all materials, transports and other incidential and conveyance charges etc., complete complying with standard specification and as directed by the departmental officers. | 6 | Nos | - | - |
| 5 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) | 115.6 | M2 | - | - |
| 6 | Supplying and fixing of Vertical blinds in Ordinary etc. complete complying with standard specification and as directed by the departmental officers. | 9.36 | M2 | - | - |
| 7 | Sub Total | - | - | - | - |
| 8 | GST 18 % | 1 | cum | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_842270.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
Tenddoce-sewatdm.pdf
Tender Documents • 0.62 MB
BOQ_842270.xls
BOQ • 0.31 MB
StandardGC.pdf
Additional Documents • 0.90 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .