Renovation of room no.1848 and 1850 at Bio Chemical sciences building at NCL.

Amount

Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead.

15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), or with chemical adhesice ,joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete including half moulding to open edges . at all levels.Granite of any colour and shade-Area of slab over 0.50 sqm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing bright finished brass door latch with necessary screws etc. complete :300x16x5 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness , jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.Two or more coats on new work

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer

Wall painting with Luster emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

French spirit polishing :One or more coats on old work

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 450x300x150 mm

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 600x450x200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe-32 mm dia

Providing and fixing C.P. brass long nose bib cock (Swan Neck) of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

Providing and fixing brass stop cock of approved quality :15 mm nominal bore

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing 20mm average thick kadappa stone slab in platform and shelves with one side machin polished,machin cut,etc.fixed in cement mortar 1:4 in coased sand including making hole in stone ,making groove in the wall and making good the damages to walls and floors as required to complete,including disposal of rubbish upto to the dumping ground with in 50mtr lead.

Providing and fixing 18mm thick MR Grade plywood approved brand and manufacture in frame work of cup-board,table tops,table side,partition,shelves etc.with adhesive and nails,including all exposed surface with french sprit polish,etc.complete as per the direction of Engineer-in-charge.Ply-wood use make only:- Green ecotech,Century,National ,Mountwall,Gargan or Tower etc.

Providing and fixing 18mm thick MR Grade plywood approved brand and manufacture in the cup-board shutters,drawers and key board Including 2nd class teak wood lipping of 18x5mm size to the exposed edges with necessary screws, adhesive, nails ,nickle plated bright finished w-hinges , decorative brass handles, mangnatic door catcher, brass cup-board lock,Telescopic channel for drawers,Chain for shutter ,including all exposed surface with french sprit polish ,etc.complete as per the direction of Engineer-in-charge.Ply-wood use make only:-Green ecotech,Century,National ,Mountwall,Gargan or Tower etc.

Providing and fixing 12mm thick MR grade plywood approved brand and manufacture in frame work of cup-board,table sides ,back,shelves,etc with necessary screws, adhesive nails,,including all exposed surface with french sprit polish,etc.complete as per the direction of Engineer-in-charge.Ply-wood use make only:- Green ecotech ,Century, National , Mountwall,Gargan or Tower etc.

Providing and fixing 6mm thick MR Grade plywood approved brand and manufacture in frame work of cup-board,shelves,drawers etc with necessary screws, adhesive nails,,including all exposed surface with french sprit polish,etc.complete as per the direction of Engineer-in-charge.Ply-wood use make only:- Green ecotech ,Century, National , Mountwall,Gargan or Tower etc

Providing and fixing 1mm thick decorative laminate lamination of PEARL GLOSS/SUEDE finish to the cup-board / ward robe shutters, with necessary screws,adsive,nails etc complete as per directed by the Engineer-in-charge.GREENLAM or HERITAGE make only.

K.K.PARMAR

KARTIKI ENTERPRISES

Bhate Builders

M/S D.M.BHATI

Praveen Construction