SPECIAL REPAIRS TO BLDG NO P-500 AND PROV OF BOUNDARY WALL NEAR BLDG NO P-33 OF 91 INF BDE SIG COY, PROVN OF COVERED CAR PARKING SHED WITH HARDSTANDING NEAR BLDG NO P-259 AT OFFRS MESS OF 11 MADRAS AND PROVN OF INTERLOCKING TILES NEAR BLDG NO P-35 O

Amount

Demolition of cement concrete (un reinforced) in roofs, floor ( other than ground floors) beams, staircase , landings , chajjas and similar suspended work all as per specified and directed

M&L PCC 1:2:4 type B0 with 12.5 mm graded granite stone agggregate 25 mm thick over RCC roof all as specified and directed

M&L rendering in CM 1:3, 10 mm thick mixed water proofing compound as per manufacturers direction all as per specified and directed Note : Water proofing compound will be measured and paid seperately.

M&L For APP modified water proofing membrane weighing not less than 3.0 Kg/ Sqm reinforcement weighing not less than 100 gms / sqm having softening point not less than 140 degree celsius, longitutudinal tensile stength not less than 300 N / Sqcm, tearing strength of 100 Nm by torch application including minium 10 cm side lap and 15 cm end laps over acoat of Bituminous emelson @ 100gms / Sqm on planted surface and hot blown bitumen 85 /25 grade @ 1.20 kg / Sqm and finishing with solar refelective Bituminous aluminum paint @ 100 gms /sqm including dismantling and removal of exisiting unserviceable membrane all as specified

Supply only integral water proofing compound all as per specified and directed

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises all as per specified and directed

M&L for 15mm thick in cement plaster screed bed in cm 1:6 for laying floor finishesall as per specified and directed

Rendering 10mm thick in cement plaster 1:4 on brick wall surfaces for fixing tiles all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match all as per specified and directed

All as per above item No 9 but as in skirting.

M&L for non skid ceremic coloured tiles 7 to 8 mm thick (square/Rectangular ) area of each tiles exceeding0.06 sqm but not exceeding 0.11 sqm, in floors etc .set and jointed neat cement slurry and pointed with colour cement to match all as per specified and directed

M&L for glazed ceremic coloured tiles of size 450x300x7mm thick as in skirting/dados set and jointed in neat cement slurry and pointed with coloured cement to match all as per specified and directed

S&F in repair Bib tap fancy type 15mm dia bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as per specified and directed

S&F in repair PVC connection 15mm dia 450mm long with 02 Nos brass check nuts with washer etc complete all as per specified and directed

S & F in repair Vitreous China Urinal, bowl type or half stall pattern,white,in colour , including fixing plugs,bedding urinal against wall in cement mortor 1:2, securing urinal to plugs with and including brass screws, pointing around urinal back in cement all as per specified and directed

S&F in repairs waste fittings brass chromium plated 32 mm/40mm dia for wash hand basin, glazed ware sinks etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified by Engr-in-Charge.

S&F in repairs viterous china wash basin, white flat back size 550mm x 400 mm including brackets with waste pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor making good, fancy type complete all as per specified and directed

S & F in repairs chromium plated brass shower roses 125 mm size with or without swivel joints including fixing to steel pipe or union. all as per specified and directed

S & F in repair of PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle incl brackets capacity 10 ltrs and connection to pipe complete fancy type all as per specified and directed

S & F in repair Pillar taps 15mm dia cast copper alloy with capstion heads, chromium plated , fancy type screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed all as specified by Engr-in-charge.

S & F in repairs Stop valve cast copper alloy,screwed down, high pressure fancy type chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed all as per specified and directed

S & F in repairs Stop valve cast copper alloy,screwed down, high pressure fancy type chromium plated with long shank and cup (concealed type) screwed both ends for 15mm dia iron pipe or for unions and fixed, all as specified by Engineer -in-Charge.

S&F in repair grating 125 mm dia with waste hole all as per specified and directed

S& Fixed in repairs vitreous china squatting pan , 'orissa' pattern, size 580 X 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including connection to trap, and to flushing pipe ,antisyphonage pipe, etc. complete includig making good to floor all as per specified and directed

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls including bend/branch pipe/clips whereever required and necessary scaffolding inclding taking down and demoliton of PCC/brick work and making good to match with existing surface all as per specified and directed (upto four storey building)

All as per item No 26 above , but 75mm dia.

S&F of 110 mm PVC(SWR) vent cowl all as per specified and directed

S & F in repair PVC (SWR) Floor trap plain with grating including jointing with solvent cement and removing old trap and making good all as directed by Engr in Charge

S&F in repair 15mm bore UPVC tubing pressure rating 10kgf/CM2 fixed complete to walls, ceiling or in floors etc any type of pipe inlcuding taking down existing etc complete all as per specified and directed

All as per item No.30 above, but 20 mm bore UPVC tubing

S&F fixed in repair towel rail 20 mm dia, D type 60 cm long of brass Chromium plated all as per specified and directed

Dismantling of asbestos cement (corrugated, semi-corrugated etc) sheet in roof covering all as per specified and directed

Dismantling wooden fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section all as per specified and directed

S&F Roof trusses (framed), trussed, Purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleats etc all as per specified and directed

M&L For Two coat of Synthetic enamel paint over a coat red oxide primer, including Preparing new steel surfaces any description, over 10 cm width or grith,not otherwise described. all as per specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws or fixed with L or J type in lieu of screws all as complete all as per specified and directed

Dismantling of wall and ceiling boards or insulation boards any thickness including cover fillets etc complete all as per specified and directed

S&F Non Asbestos decorative type fibre cement building boards , 4 mm thick fixed or laid / inserted to timber / GI / Aluminum frame work with screws on ceiling etc all as per specified and directed

M&L For Anodised aluminum snap grid frame work for false ceiling size 605 x 605 mm complete all as per specified and directed

Taking down of cement plaster incl hacking out of joints, hacking for key, scrubbing down with water etc all as per specified and directed

Demolition of brick work/stone masonry built in cement mortar and removing the debris/rubbish to a distance n.exc 100m as directed by Engineer-in-Charge.

M&L Pre-Cast Cement Concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as per specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement plaster 1:4. finished even and smooth without using extra cement on external surfaces all as per specified and directed

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in cement plaster 1:6. finished even and smooth without using extra cement on internal surfaces all as per specified and directed

M&L for Applying two coats of acrylic exterior emulsion water proofing painting over a coat of primer including prepartion of new surfaces of wall all as per specified and directed (up to four storey bldg) as per manufactures instructions )

M&L two coats of oil bound distember over a coat of primer including prepartion of new plastered surfaces of wall ver 10 cm width or girth all as per specified and directed

Brooming down and preparing old surfaces of ceiling and applying one coat of white wash on old decorated surfaces all as per specified and directed

M&L Washing,rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper to wall including preparation of surfaces all as per specified and directed

M&L for Applying one coat of acrylic exterior emulsion water proofing painting including prepartion of old surfaces of wall as per manufactures instructions

Preparation of old surfaces of wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as per specified and directed

All as per item No.51 but in steel surfaces

Taking down chowkats or frames exc. 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frame) all as per specified and directed

Taking down chowkats with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each all as per specified and directed

S&F Aluminum door/windows using power coated aluminum section, including necessary joining cleats,glazing clips, rubber neoprene packing, handles aluminum snap beading screws etc powder coating of any colour (thickness of powder coating minimum 50 micron ) complete all as specified and directed.

S&F Door closer hydralulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed using aluminium extruded section all as specifieed by Engr-in-charge.

S&F Brass Mortice lock of 4 Levers, vertical type, of size 100mm all as per specified and directed

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor (Overall length of cover plate 150mm) all as per specified and directed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminiumallow sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per specified and directed

S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to fimber frame work all as per specified and directed

M&L Sheet glass ordinary quality and glazing with rubber neoprene packing in square exc 0.5 sqm in each pane 5.5 mm thick glass or all as specified and directed by engineer in charge.

Demolition of stone slabs/ tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and remove the rubbish off the premises complete all as per specified and directed

Demolition of cement concrete (unreinforcement) as in ground floors or paving n. exc 15cm thick below or above ground level complete all as per specified and directed

M&L 75mm thick cement concrete 1:3:6 type C2 (40 mm graded stone agg) as in sub base of floor all as per specified and directed

M&L Chequered cement concrete tiles 400x400x20-25mm thick coloured set jointed and pointed in neat cement slurry in floors with grey cement and pigment all as per specified and directed

S&F Solid PVC Door Frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification

S&F Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

S&F 100 mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised , type C21 complete all as per specified and directed

S&F Aluminum anodised, barrel tower bolts of extruded section and fixed of 100mm long all as per specified and directed

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 300mm long all as per specified and directed

S&F 150mm long aluminum handles cast type anodised all as per specified and directed

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as per specified and directed

M&L 75 mm thick PCC 1:3:6 type C2, using 40 mm graded stone aggregate as in plinth protection/path finished even and smooth without using extra cement all as per specified and directed

M&L for surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil all as per specified and directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for fdn and steps and getting out in hard/dense soil all as per specified and directed

Surface excavation n.exc 30 cm deep and averaging 10cm deep and getting out in hard /dense soil all as per specified and directed

M&L Plain cement concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in sub base in 100mm thick all as per specified and directed

Sand filling/cushioning under floors or in foundations including watering and consolidation all as per specified and directed

M&L for machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 Grade with grey cement and pigment all as per specified and directed

M&L for PCC type B1 1:2:4 ( 20 mm graded aggregate in kerbs or mud stops rounded or chamfered edges etc complete all as per specified and directed

M&L for removing excavated surplus soil removing from drainage to a distance not exeeding 50 m and dipositing where directed at a level not exeeding 1.5 m above the starting point all as per specified and directed

Returning filling in including spreading, leveling, watering well ramming in layers not exc 25cm thick using excavated soil all as per specified and directed

Excavation in Post holes ( or similar holes ) in hard dense soil, each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as per specified and directed

M&L Providing cement concrete 1:3:6 type C2 (40 mm graded stone agg) as in foundations, filling and mass concrete, all as directed by Engr-in-charge.

S&F Framed brackets of angles or tees with web and flanges cut to shape drilled and counter sunk for screw, including bending and welding angles as necessary guesset plates, riveting etc n exc 10 kg each brackets conforming to Fe 290. Gde-E-165 all as per specified and directed

S&F Mild steel screw boplts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to fitted with washers and one hexagonal or square nut, n exc 5 cm long, dia of neck 11 to 15 mmthick all as per specified and directed

M&L Hardcore guage for broken stone / boulders exc 63 mm n.exc. 100 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled / rammed to a true surface all as per specified and directed

M &L for Cement concrete type -C1, 1:2:4 (40mm graded aggregates) 100mm thick as in floor/ paving and finishing the surface even and smooth without using extra cement all as per specified and directed

M&L precast cement concrete slabs /shelves/landing and similar articles with plain faces type B1 1:2:4 (20mm gaded aggregates)and set in cement mortar 1:4 all as per specified and directed

M&L TMT bars 10mm dia and over, cut to length bend to shape required including cranking bending spirally for hooping for coloumns hooking ends and binding with and including mild steel wire annealed ) not less than 0.9 mm dia or securing with clips qualitty conforming to Fe 410-W (Gde E-250 ) all as per specified and directed

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as per specified and directed

S&F 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, cluding bending or turning up, mitred all as per specified and directed

S&F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300 mm long all as per specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc.complete all as directed

Point wiring complete for One light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor conforming to IS:694 drawn through and including non-metalic PVC conduit totally concealed in wall with recessed, pressed steel terminal boxes of suitable size, concealed etc, incl suitable thick modular cover plate for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly all as specified and directed NOTE: Cost of modular metal flush boxes with a coat of synthetic enamel paint over a coat of red oxide to steel surface to avoid rust, concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push etc and Cost of cutting chases & making good to distrubed surface with cement mortar, if required any shall be deemed to be included in the quoted rate Make: Havells or equivalent make of Finolex/Nicco/Plaza/Anchor/Polycab/RPG

All as per ser item No. 95 above but for One fan point controlled by one way switch and regulator

All as per ser item No.95 above but for one 5 Amps outlet on same board with other switches/sockets

All as per ser item No. 95 above but for one 5 Amps socket outlet on independent board.

All as per ser item No. 95 here in above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.

All as per ser item No. 95 here in above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.

S&F modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed Make: Anchor or equivalent make of Havells/Legrand/Cona/Crabtree

S&F modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed Make: Anchor or equivalent make of Havells/Legrand/Cona/Crabtree

S&F modular fan step regulator, 120 W - 2 module, 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm/1400 mm sweep all as directed Make: Anchor or equivalent make of Havells/Legrand/Cona/Crabtree

S&F modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed Make: Anchor or equivalent make of Havells/Legrand/Cona/Crabtree

S&F modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed Make: Anchor or equivalent make of Havells/Legrand/Cona/Crabtree

S&F Lamp holder angular type, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as directed Make: Anchor or equivalent make of Havells/Legrand/Cona/Crabtree

S&F ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified Make: Anchor or equivalent make of Havells/Legrand/Cona/Crabtree

S&F sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed. Make: Indo Asian or equivalent make of L&T/Legrand/Havells

M&L for distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 4 way, 415 volts grade with insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TP/SPN/SP etc, including taking down existing unserviceable one and removing from site complete all as specified and directed Make: Legrand or equivalent in L&T/Indoasian/Havells

Supply and fixing MCCB triple pole and neutral (four pole) 160 Amp, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 25 KA including making incoming and outgoing connections complete all as specified and directed. Make: Legrand or equivalent in L&T/Indoasian/Havells

M&L for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, TPN 4 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, including taking down existing unserviceable one and removing from site complete all as directed Make: Legrand or equivalent in L&T/ABB/Havells/Siemens/Schneider/Indoasian

All as per ser item No. 111 above but for SPN 12, 240 volts grade with 200 Amps insulated rated busbar

S&F MCB single pole 5 to 32 Amps current carrying capacity, 240 volt rating, 10 KA, C curve with IP-20 protected terminals including contact indication window for visual indication and safety of operator, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete with connection, testing and commissioning, and taking down old unsv one from the site complete all as specified and directed Make: Legrand or equivalent in L&T/ABB/Havells/Siemens/Schneider/Indoasian

All as per ser item No. 113 above but for MCB SPN 32 Amps

All as per ser item No. 113 above but for MCB TP 63 Amps, 415 volt rating

All as per ser item No. 113 above but for MCB TPN 32-40 Amps

All as per ser item No. 113 above but for MCB TPN 63 Amps

S&F Optipro Plastic plug & socket board - 32 A, 2 pin plug & socket outlet, three phase and neutral, provision for 4 modules, conforming to IS:8623 with IP-30 protection complete all as specified and directed Make: Legrand or equivalent make of Indo Asian/L&T/Schnider/C&S/Havells

Supply and fixing sub main wiring with 4 runs of 10.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC FRLS conduit, medium grade, ISI marked, 20/25mm bore with conduit fittings and accessories concealed in wall/ceiling/floor including 2 runs run of 6.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete. NOTE: Foru runs of 10.0 sqmm copper cable and two run of 10.0 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length Make: Havells or equivalent make of Finolex/Nicco/Plaza/Anchor/Polycab/RPG

All as per ser item No. 119 above but for sub main wiring with 2 run of 6 sqmm & 1 run of 6 sqmm as earth wire

Taking down carefully existing serviceable Ceiling fan/Wall mounted fan, ceiling cable end, etc., removing the fan for keeping in safe custody, hanging the ceiling fan with down rod after rewiring including clamps, hooks, holdfasteners etc and connecting up, including making electric connection from ceiling rose or connector to fan complete all as directed

Taking down carefully existing serviceable exhaust fan, ceiling cable end, etc., removing the fan for keeping in safe custody, fixing the exhaust fan connecting up after rewiring, including making electric connection from ceiling rose/connector to fan complete all as directed

Dismantling and taking down carefully existing serviceable tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for keeping in safe custody, refixing the same at its original location after wiring, including making electric connection from connector to light fittings & connecting up, testing the same for smooth operation complete all as specified and directed

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, double sided connection, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, including taking down existing unserviceable one and removing from site complete all as specified and directed. NOTE: LED tube light and LED batten fittings should be two different items. Make: Havells or equivalent make of Philips/Bajaj/Wipro/Osram/GE

S&F SPAN recessed/surface mounted LED luminaire 4' x 1' panel ceiling light with performance, commercial grade solution with 40 watts LED including prewired complete all as specified and directed. Make: Havells or equivalent make of Philips/Bajaj/Wipro/Osram/GE

S&F LED roadway luminaries 35 Watt, 230 V AC outdoor type with epoxy black powder coated sheet, high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket of suitable size with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting complete and testing, including taking down existing unserviceable one and removing from site complete all as specified and directed. Make: Havells or equivalent make of Philips/Bajaj/Wipro/Osram/GE

Supply & laying sub class 'B' brick, well burnt brick, sub class (Designation 75) 'B' of old size (locally available best quality), for protection of LT under ground cable against mechinical/trafic load complete all as specified and directed

Supply & laying in trenches/drawn through pipes or in road crossing/paths/drains/ducts/floors/along poles/equipments etc., of XLPE insulated, armoured with multistranded aluminium conductor cable conforming to IS-7098 Part-I (1998), heavy duty (LT UG cable) conforming to IS-1554, 1100 Volts grade of size 120 sqmm 3½ core nominal cross sectional area including connecting up using suitable size aluminium lugs testing and commissioning complete all as directed NOTE: Excavation, earthwork, sand cushioning, brick protection & cable protection etc. will be measured and paid separately under relevant items of this schedule. Make: Gloster or equivalent make of Finolex cable/Polycab/Universal/Asian Cable Co

Supply and fixing double compression copper gland for fixing armoured cables of size 120 sqmm 3½ core nominal cross sectional area complete all as directed

Supply & laying GI steel tubing light grade 80mm dia for protection of cable on poles, under road crossing etc, complete all as directed. Make: Jindal or equvalent make of TATA/Zanith

M&L for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts and washers of the earth and thimbles and other end of the earth strip connected to earthing test point and protected by galvanised iron pipe light grade 40mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade raised upto a level of 50cm above ground level with plug at top, earthing pit in PCC (1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab of 50 mm thick using 8.00mm dia CTD bars reinforcement both ways at 140 mm centre to centre with handle, 20 mm dia GI pipe medium grade for watering pipe, wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed.

Shilpa Engineers and Contractors

DJ GROUP