Tender ID

Himachal

Cancelled

Works

Civil Works

A/R and M/O to various Residential Qtrs. Under Kasumpti Sub Division Kasumpti Shimla

Public Works Department

kasumpti | Shimla, Himachal Pradesh

Amount: Refer DocsCloses: 24 Apr 2026Closed

Timeline

Published16 Apr 2026
Closed24 Apr 2026
Cancelled25 Aug 2026

Cancellation Details

Cancellation of Tender

Cancellation of TenderCancellation of TenderReason: Due to admistrative reasons/issuesDocument: cancelled_1.pdf

Published 25 Aug 2026

Tender Value

Refer Docs

EMD Value

₹20,000

Closing Date

24 Apr 2026, 10:00 amClosed

Tender Inviting Organisation

Name

Executive Engineer kasumpti Division HPPWD Shimla3

Address

Executive Engineer kasumpti Division HPPWD Shimla3

Work Description

Repair of damaged roof due to fire incident Type-III Set No. 110 at Kasumpti Shimla

Tender Information

Tender ID

2026_PWD_134290_3

Reference Number

SD-I-CTR-Tender-921 dt 13-04-2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

30 days

Location

kasumpti

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per SBD

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

RequiredCost of Tender Form On line (.pdf)

RequiredEarnest Money Deposit on line (.pdf)

RequiredContractor registration IN APPROPRIATE CLASS (.pdf)

RequiredGST registration and PAN No (.pdf)

RequiredWork in hand certificate (As per Performa given in General rule No.16 ). (.pdf)

RequiredMachinery tools and plants (As per schedule F with reference to clause 18 (.pdf)

RequiredForm No. 7/8 duly signed (.pdf)

RequiredThe Contractor Shall give affidavit regarding List of both gazette and non gazette HPPWD Employees (.pdf)

RequiredProof of registration under Employee Provident Funds and Miscellaneous provision Act. 1952 (.pdf)

RequiredAffidavit that information furnished with the bid is correct in all respect (.pdf)

Requiredemail Mobile No , and Full Address (.pdf)

Finance

RequiredBill of quantities (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹20,000

Important Dates

Last Activity

25 Aug 2026

Published

16 Apr 2026

Bid Opening

24 Apr 2026

Download Starts

16 Apr 2026

Download Ends

24 Apr 2026

Submission Starts

16 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (7 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (G.S Sheet).	-	Per Square Metre	-	-
2	Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings, framed guards bars ladders, railing, brackets and similar work.	-	Per KilogramMetre	-	-
3	Providing and fixing 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 8mm dia metre with prepainted limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-charge. (MAKE TATA)	-	Per Square Metre	-	-
4	Providing ridges or hips of width 60 cm(sixty centimetre)overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm(eight milimetre) dia G.I. limpet and bitumen washers complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 0.63mm thick with zinc coating not less than 275 gm/m.	1	Per Running Meter	-	-
5	Providing flushing 38cm. overall in plain G.I. sheet fixed with galvanised iron. J or L hooks, bolts and nuts, G.I. limpet washer and bitumen washers complete bent to shape and fixed in walls with cement mortar 1:3 (1 cement : 3 sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.	-	Per Running Meter	-	-
6	Providing and fixing M.S. BP Sheet1.66 to 2mm thick in eaves board. Facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately)	1	Per Square Metre	-	-
7	Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge.(i) With white enemal paint.	1	Per Square Meter	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.38 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.31 MB

Work Item Documents

SBD1000396.pdf

Tender Documents • 7.00 MB

BOQ_198585.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (G.S Sheet).

Per Square Metre

Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings, framed guards bars ladders, railing, brackets and similar work.

Per KilogramMetre

Providing and fixing 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 8mm dia metre with prepainted limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-charge. (MAKE TATA)

Per Square Metre

Providing ridges or hips of width 60 cm(sixty centimetre)overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm(eight milimetre) dia G.I. limpet and bitumen washers complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 0.63mm thick with zinc coating not less than 275 gm/m.

Per Running Meter

Providing flushing 38cm. overall in plain G.I. sheet fixed with galvanised iron. J or L hooks, bolts and nuts, G.I. limpet washer and bitumen washers complete bent to shape and fixed in walls with cement mortar 1:3 (1 cement : 3 sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Per Running Meter

Providing and fixing M.S. BP Sheet1.66 to 2mm thick in eaves board. Facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately)

Per Square Metre

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge.(i) With white enemal paint.

Per Square Meter