Supply and Installation of 6 Nos 9 m Steel Tubular Poles with single 90watt LED Street Light at Bauripara Play Ground Fatakgora within CMC Area

Amount

Supplying of Swaged Steel Tubular pole (IS 2713, Pt. II 1980) for following designation and of following dimensions ---- 410-SP-30 ; 9.0mtrs: 133 Kg

S/F single arm projected lamp bracket (Single pipe bending ) of 50cm (2") dia G.I. pipe (ISI medium) 3.65 mm thick of 2.1 mtr (6’ approx) long having 105 degree curvature with reducing socket to be fitted at the top of the pole with bolts, nuts, clamps etc. as required.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (proportion and dimension indicated below) having 600x600x150 mm thick cc(4:2:1) base block below the plate/pole with hard jhama metal including CC(6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3mm thick net cemented finish and GI earth bolt after making drilled holes etc. on pole and carriage the pole upto 1.6km from store to work site including filling up the excavated earth pit by shifted soil and ramming properly (a) upto 9.0 mtr. - size 0.6x0.6x1.70mts

Supply and delivery of 90 watt LED Street Light with pressure die cast aluminium housing, IP66 protection, road way luminarie with high power LED as per the detail technical proposal specification & vendor list attached [ Make-Crompton (LSTS-90-CDL-M)/Philips(BRP406 LED130 CW CLC FG PSU GR V2)/ Havells (ENDURA PEARL LMAG SL 90WLED 757 PASY TOPCASTHO) Warranty Period- 7 Years]

Hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment: HPMV/HPSV luminaries/LED fittings of any wattage.

Supplying and wiring in 2 x 1/1.40 (2X3/.029) copper conductor single core PVC insulated 250V grade wire from cable termination block to luminaries with earthing attachment in 14 SWG G.I. Wire including making necessary connections complete as per direction of Engineer-In-Charge.

Supply of 2 core 10sqmm armoured Aluminium cable

Laying of Cable as below, after cutting floor/pavement/wall/and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish ---- From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supplying and fixing compression type gland complete with brass gland, brass ring, rubber ring for dust and moisture proof entry of XLPE/PVC armoured cables as below for 2 core 10sqmm

Finishing of the XLPE/PVC insulated armoured cable ends by crimping method incl supplying and fixing solderless socket(Dowels) type anticorrosive paste and jointing materials 2 core 10 sqmm

Supplying and fixing 240/415 V MCB of Breaking capacity 10 KA & C characteristics on din rail of existing DBs and necessary connection --- 6-32 A SPN ( Standard )

Supplying & Erection of mini size feeder pillar box of Size Each 7053.00 (918 x 561 x 382 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C

Earthing with 50mm dia GI pipe 3.64mm thick x 3.04mtrs long and 1x4SWG GI (Hot Dip) wire (4mtrs long), 13mm dia x 80mm long GI bolts, double nuts, double washers incl. S&F 15mm dia GI pipe protection (1mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65mts below the ground level as below: by ISI-Medium GI pipe

Connecting the equipments to earth busbar including S&F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. As required and mending good damages No. 8 SWG

Painting of steel Tubular pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint (a) Upto 9.0 mtr. long pole-- (i) One coat of red lead/Zinc chromate priming, (ii) 1st coat of synthetic enamel paint over the primer, (iii) 2nd coat of synthetic enamel paint over the 1st coat

ISHAYU ELECTRIC (BID ID -5554779)

HSD ASSOCIATE (BID ID -5556226)