GE(S) BTD 48 of 2019-20 PAINTING/POLISHING OF WOODEN/STEEL FURNITURE UNDER GE(S) BATHINDA AT BATHINDA MIL STN

Amount

Preparation of old painted iron & steel surface (externally and internally complete) of Almirah large steel (FD-1031/67(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Almirah large steel (MAP) (FD/E6/MAP/18) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Almirah med steel (FD-1032/243/67(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Book case steel (FD-1028) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Book shelf open large steel (FD-69(M)/TP) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Book shelf open small steel (FD-69(M)/TP) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface of Bed hard steel (FD/E6/MAP/8)/(FD/E6/MAP/8(R)) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface of Chair CB Steel with Arms (FD-75M) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Chair CB Steel with Arms shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface of Chair CB Steel without Arms (FD-75M) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Chair CB Steel without Arms shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface of Chair Verandah(FD/E6/MAP/11) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface of Form with back (FD-78(M)) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Form with back shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface of Form without back (FD-77(M)) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Form without back shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface (externally and internally complete) of Locker steel (FD-1029/257) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Rack 6 Tier steel (FD-1038) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Rack side steel with tray (FD-97/1023) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface of Rack Shoe steel (FD/E6/MAP/2(R)) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Rack record steel (1830x760x1905mm) (FD-129(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Rack record steel (915x760x1905mm) (FD-129(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface of Table 900x600x760mm w/o drawer steel (FD-1007) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Table 900x600x760mm w/o drawer steel shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface (externally and internally complete) of Table 900x600x760mm with drawer steel (FD-1008) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Table 900x600x760mm with drawer steel if any shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface of Table 900x900x760mm steel (FD-1009) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Table 900x900x760mm steel shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface of Teapoy Verandah (FD/E6/MAP/17) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Teapoy Verandah shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface (externally and internally complete) of Table office clk steel (FD-1004/381/307/84(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Table office clk steel shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface (externally and internally complete) of Table office offrs steel (FD-1002/1003/84(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Table office offrs steel shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface of Table dining OR steel (FD-165(M)) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Table dining OR steel shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface (externally and internally complete) of Trestle store room steel (FD-1043/86(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface of Teapoy Verandah (FD-35/208/255/383) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Teapoy Verandah shall be french polished with high gloss finish.

Removing of old wooden polish from complete surfaces of Almirah Mess Utensil (FD-93(M)), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Bed Plywood top (FD-246/213), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Book case wooden (FD-45/237), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Chair dinning (FD-203/228/262/270/279/1105), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Chair Easy (FD-17/201/229/1108), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Chair writing (FD-280/250), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved, complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Chair dinning long back (FD-357), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved, complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Chair dining Cushioned (FD/E6/MAP/10(R)/FD/MAP-II/04), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Chair wooden bottom (FD-56/225/285), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Chair Dining PVC seat (FD/MAP-II/05), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Hand stand with mirror (FD-206/233/361), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Sofa set 4 seater (1+1+1+1) (FD-281/373), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Sofa set 5 seater (3+1+1) (FD-258/281/373), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table dining 6 person (FD-239/273/376), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table dining 8 person (FD-239/273/376), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table dining 1200x900x760mm (FD/MAP-II/03), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table bed side (FD-210/248/265/276), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table 900x600x760mm w/o drawer (FD-42/231/284/223/55), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table 900x600x760mm with drawer (FD-41/224/283), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table centre (FD-29/134/235/274/375), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table writing (FD-33/249/268/275), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table dresssing Gents with mirror (FD-31/230/379), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table dresssing Laddies with mirror ( FD-32/251/378), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Teapoy (FD-34/232/278/382), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table 900x900x760mm (FD-88/291), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Table Peg (FD-266/277/384/236), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Side Board (FD-26/241/371), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Removing of old wooden polish from complete surfaces of Stool dressing CB/Cushioned (FD-252/282/374/FD/E6/MAP/14), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M/s MAKHAN ENTERPRISES

H.K.TRADERS

M/S CHAWLA CONSTRUCTION COMPANY

SMS Enterprises

SUNIL TRADERS