REPAIRS TO TILING FLOORING ROOF TREATMENT JOINERY PLUMBING ETC IN OFFICERS MD ACCN AT SIKH VILLAGE UNDER GE NORTH SECUNDERABAD

Amount

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed

M&L for 10mm thick vitrified light shade polished ceramic tiles,area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 10mm thick vitrified light shade doubly charged polished ceramic tiles, area of each tile not exceeding 0.36 sqm, in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, and cement screed in CM 1:6, 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for granite slab flooring 20 to 25 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over 20 mm thick screed bed in CM 1:6 including making hole in platform for gas pipe complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar shine complete all as specified and as directed.

Demolition of cement concrete in floors and pavings n.exc15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded aggregate) as in subbase of floor complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection , at 3 metre interval and every change of direction duly filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed

Demolition of cement concrete on Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work cement concrete complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 ( using 40 mm graded stone aggregate ) for filling in sunken floors complete all as specified and as directed.

M&L for 25 mm thick plain cement concrete (1:2:4) type B0 using 12.5 mm graded stone aggregates as in padding (level course) on roof including finish the surface even & fair complete all as specified and as directed.

Material and labour for rendering 10 mm thick in CM (1:3) using water proofing compound on roof and chajjas including finish the surface even and fair complete all as specified and directed. Note : Water proofing compound will be measured and paid separately complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM (1:3) using water proofing compound as in sunken floor including finish the surface even and smooth (without using extra cement) complete all as specified and directed .Note : Water proofing compound will be measured and paid separately complete all as specified and as directed.

Supply only integral water proofing compound omit complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking sweeping cleaning & washingg down with water to remove dust etc incl removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 kg/Sqm complete all as specified and as directed.

M&L for providing water proofing felt having glass fibre non woven reinforcement and weighing 3 to 4 kgs /Sqm in 100 mm overlaps both longitudinally and transversely by torch bonding over a coat of hot blown bitumen 85/25 at the rate of 1.2 kgs per sqm as in sunken floor ( bottom and vertical surfaces ) complete all as specified and directed.

M &L for priming plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm as per IS 3384 and providing water proofing treatment by applying mineral finish 3.50 kgs/sqm atactic propylene (advanced APP omit membrane mineral finish) having polyster film reinforcement stabilised with fibre glass and finished on top with grey mineral slates torch on system of thickness 3.00 mm by torch bonding complete all as specified and as directed.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 10mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar (1:4) with WPC over a layer of 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed. Note: Water Proofing compound will be measured and paid separately.

M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified.

M&L for prepartion of new plastered surfaces on wall applying two coats of oil bound distemper over a coat of primer including 3mm thick in two coats wall care putty complete all as specified and as directed.

M&L for preparation of new plastered surfaces over applying three coats of white wash on wall surfaces complete all as specified and as directed.

M&L for preparation of new plastered on wall including applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for complete removal of existing wall treatment and applying two coats of OBD over a coat of primer including 3 mm thick wall care putty (in two coats) complete all as specified and as directed.

M&L for complete removal of existing treatment and applying three coats of white wash on wall surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of weather proof exterior emulsion paint over a coat of primer on wall surfaces complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl steel window, ventilators etc complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm and n exc 2 Sqm each complete all as specified and as directed.

M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

S&F Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified and as directed.

S&F 150mm size aluminium anodised handles, fabricated type complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S & F powder coated anodised aluminium frame,three track sliding for windows, fixed/top hung frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S & F powder coated anodised aluminium sliding window shutter and top hung ventilator shutters with sash bars aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing ,locking arrengement complete all as specified and as directed. Note: Glass panes and wire mesh shall be measured and paid seperatly.

M&L for Mild steel frame work such as grills, framed guard bars conforming to IS Fe 290 -0 Gde E-165 complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer including preparation of new steel surfaces of any description over 10 cm width and girth complete all as specified and as directed.

S & F 5.5 mm thick Sheet glass, ordinary quality in square exceeding 0.5 Sq. m in each pane fixed to aliminium frame work complete all as specified and as directed.

S & F 4 mm thick Figured glass, pin headed type in squares not exceeding 0.5 Sq. m in each pane.fixed to aliminium frame work complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified and directed .

Supply and fix Pressed steel door frame of size 105 X60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

All as Item No.48 above but of size 125 X 60 mm complete all as specified and as directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated and solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed .

Material and Labour for PCC 1:2:4 Type B0 ( using 12.5 mm graded stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed .

Material and labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in block for fixing of hold fast, window cill and similar items including necessary formwork complete all as specified and as directed .

M&L for 35 mm thick flush door shutters solid core construction with block board core with decorative face finish on one sides complete all as specified and as directed.

M&L for factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003(Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35mm thick glazed and skelton shutters divided into squares with plain, chamfered or rounded, mitred and rebated sash bars prepared to receive glass, gauge sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24 (A) second class hard wood complete all as specified and as directed.

S&F in repairs double action spring hinges mild steel with steel wire spring, stove enamelled black 100 mm long complete all as specified and as directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.0 mm and fixed with stainless steel wire staples complete all as specified and directed .

S&F mild steel flat iron as in hold fast complete all as specified and as directed.

Cutting holes in brickwall built in cement mortar depth of embedded portion of holdfast exc halfbrick but not exc one brick and making good dismantled portion in cement mortar 1:3 complete all as specified and as directed.

S&F of 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F of aluminium alloy anodised sliding door bolt with hasp staple (bolt type) length 300mm fixed complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 100 mm extruded brass handles, for cupboards fabricated type ccomplete all as specified and as directed.

S&F floor rubber door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor 150 mm length complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of wooden surfaces exceeding 10 CM girth or width complete all as specified and directed.

M&L for preparation of old painted wooden surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13sqcm but not exceeding 25 sqcm complete all as specified and directed .

M&L for prelaminated particle board of 18/19 mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work of cupboards, book case etc complete all as specified and directed.

S&F 12 mm thick plywood BWR type fixed with screws to timber framework complete all as specified and directed.

S&F Hasp & staple 100 mm size aluminium anodised fixed with screws complete all as specified and directed.

S&F in repair continuous (piano) hinges 30 mm width of flap, brass, bright finish or electrogalvanised complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nut screws and washers of brass polished complete all as specified and directed.

S&F in repair 20mm dia CP Decorative type drapery curtain rods with brackets of approved quality complete all as specified and as directed .

S&F in repair vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity cocomplete all as specified and as directed.

S&F in repair Viterous china orissa pan squatting pattern 580 X 440mm with integeral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity complete as directed.

S&F in repair vitreous china wash basin with pedestal, white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long, waste coupling of PTMT, PVC waste pipe complete all as specified and directed.

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and as directed.

S&F 15 mm dia 60 cm long PVC water connection with PTMT nuts and washers complete all as specified and directed.

S&F in repair bathroom mirror cabinet PVC of size 400 X 500 mm fancy type complete all as specified and as directed . Make : Cat No-554 of Prayag or equivalent as approved by GE.

S&F in repair CP Soap dish fixed with chromium plated brass screw complete all as specified and directed.

S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs of plastic water closet seat, black or white closed pattern, solid type with flat bottom, cover and mild steel chromium plated hinging device with recessed bottom complete all as specified and as directed

S&F in repairs stop cock chromium plated 15 mm dia complete all as specified and directed;

S&F in repairs concealed stop cock but fancy type 15mm dia, chromium plated with long shank and cup (concealed type) complete all as specified and as directed.

S & F in repair 15mm bore dia. pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair bib cock/tap 15 mm chromium plated long body complete (but fancy type) or complete all as specified and as directed.

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed.

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated complete all as specified and as directed.

S&F in repairs stainless steel grating of 125 mm dia chromium plate grating for nahani traps with or without hole for waste pipe complete all as specified and as directed.

S&F HDPE pipes of pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors complete all as specified and directed.

S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and directed.

S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and directed.

S&F GI tubing 25mm bore medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old steel tubing complete all as specified and as directed.

S&F in repairs CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified and as directed.

Demolition and breaking up drain AC pipes/PVC pipes/CI Pipes set in cement mortar of any dia and size complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, bore of the pipe 110 mm complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm bore complete all as specified and as directed.

S&F PVC SWR branch pieces, single (single Y) equal or unequal (size or socket type or with parallel branches with access door bore of the pipe 110 mm ) complete all as specified and as directed.

S&F PVC SWR branch pieces, double (double Y) (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 110 mm ) complete all as specified and as directed.

S&F PVC SWR branch pieces, single (single Y) equal or unequal (size or socket type or with parallel branches with access door bore of the pipe 75 mm ) complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction single ( single 'T') equal or unequal complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed. .

S&F in repair stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) complete all as specified and as directed. Make : Cat No:CON-083FTK of Jaquar or equivalent as approved by GE.

S&F in repair angle valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) complete all as specified and as directed. Make : Cat No:CON-059KN of Jaquar or equivalent as approved by GE.

S&F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug and washers, waste pipe with cantilever brackets.over all size 915 X 460mm bowl size 410mm X 330mm X160mm complete all as specified and as directed.

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified and as directed. . Make : Cat No:ALD-579 of Jaquar or equivalent as approved by GE.

Supply and fix in repair wall mixer with provision of overhead shower with 115 mm long bend pipe on upper side , connecting legs & wall flanges complete all as specified and as directed. Make :Cat No: FLR-5273UPR of Jaquar or equivalent as approved by GE.

S&F in repairs toilet paper holder, vitreous china, box type coloured, fixed with chromium plated brass screw complete all as specified and as directed.

Dismantling water tanks of exc 500 but n.exc 1000 ltr capacity and removing to store complete all as specified and directed.

S&F of rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair 25mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed.

S&F in repair 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs 25 mm dia brass ball valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

Cutting Chases, pinning in, making good to facing where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good of cutting in brick wall not exceeding 10 cm girth complete all as specified and as directed. .

Supply and fix in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed .

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with bricks fly ash bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed .

Use and waste of formwork to sides & sofits of RCC shelves for rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to sides & sofits of chajja etc for rough finished concrete surfaces complete all as specified and directed.

Material and labour for providing reinforced cement concrete (1:2:4 ) type B1 (using 20 mm graded stone aggregate) as in slab supported on wall .complete all as specified and directed.

Material and labour for providing reinforced cement concrete (1:2:4 ) type B1 (using 20 mm graded stone aggregate) as in chajja complete all as specified and directed.

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .

Material and Labour Plain cement concrete 1:2:4 type-B1 (using 20mm graded stone aggregate ) as in benching , coping etc incl necessary form work.complete all as specified and directed.

Dismantling structural steel work including doors , gates etc complete all as speciified and as directed .

Supply and fix rolled mild steel Fe-290 (grade E-165) framed work as in doors or gates of angle or other section with gusset plate , rails , braces etc complete drilled for fixing of steel sheeting or other covering . Doors etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings complete all as specified and as directed .

Supply and fix 1.25 mm thick mild steel plain black sheet in wall cladding and similar work , cut to size , holes punched including round headed screws , clout nails or rivets and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up , mitred angles as required complete all as specified and as directed .

Material and labour for cutting grooves in brick wall 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed .

M/S C MALLIAH & SONS

M/s GM Constructions

M/S AKSHATHA ENTERPRISES