REPAIRS TO STORM WATER, DRAINAGE SYSTEM, DRAIN COVERS, FENCING, HARD STANDING AND OTHER MISC PETTY REPAIRS FOR OTM ACCN AND LAND 50A AT INS HAMLA UNDER GE (NW) BHANDUP

Amount

Exavating in trenches n. exe 1.5 m wide and n. exe 1.5 m in depth, for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n exe 10 sq m on plan and getting out in Hard / dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded crushed stone aggregates as in foundation filling and mass concrete in foundation of fencing posts complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, cornices , concrete coping etc on brick work complete all as specified and directed.

M&L for Brick work with sub class-"B" Bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) Complete all as specified and directed.

M&L for pre-cast cement concrete 1:3:6 ,type C1 using 20mm graded stone aggregate as in solid block masonry exc.100mm width and built in CM(1:4) all as specified and directed.

M&L for walling or random rubble , uncoursed well bonded, bedded and solidly, hearted built in CM 1:6 etc complete all as specified and directed.

All as per item No. 6 above but except stones including removal of mortar, cleaning with water etc complete all as specified and as directed by the engineer-in-charge. Note:- Old stone obtained under Item above shall be re-used under the subject items complete all as specified and directed.

Hammer dressing to face stones with maximum depression on fair face from straight edge held against the dressed surface not exceeding 40 mm for granite or trap stone of face beds & joints as specified of random rubble walling uncoursed or brought upto course complete all as specified and directed. Note :- Hidden portion of masonry shall not be hammer dressed.

Racking out joints/pointing to randum rubble or poly gonal rubble uncoursed or brought upto courses built in cement mortar 1:4 complete all as specified and directed.

M&L for Raised pointing to randum rubble or polygonal rubble uncoursed or brought upto courses built in cement mortar and pointing to RR masonry with CM 1:4 complete all as specified and directed.

Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Formwork to faces of walls, retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter curved surface complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) B-2 1:2:4 12.50 mm graded aggregate in Walls, retaining walls, basement walls, ballast walls and the like any thickness above top of footings; including attached pilaster and buttresses complete all as specified and directed.

M&L for Formwork to sides of concrete foundations rough finished surfaces, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for RCC (nominal mix) B-2 1:2:4 using 20 mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Formwork to rough finish surface of concrete flat, soffits of suspended slabs such as roof slabs, floor slabs,supported on wall etc. landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M&L for RCC 1 : 2 : 4 type B-0 (using 12.5mm graded stone aggregate) Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like sla betc complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, oncrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm complete all as specified and directed.

M&L for reinforced cement concrete 1 : 2 : 4 type B-1 (20mm graded stone aggregate) for beams, cantilevers etc complete all as specified and directed.

M&L for RCC 1 : 2 : 4 type B-1 (using 20mm graded aggregate) for cover slab MH including necessary form work and set in cement mortar 1 : 4, complete all as specified and directed.

M&L for RCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) in chajjas complete all as specified and directed .

M&L for RCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) in fascias, louvres, parapets and the like complete all as specified and directed .

M&L for form work to sides & soffit of roof beams / top beams fascias chajja lovres rough finished surface of concrete complete all as specified.

Supply and fix of TMT bar 10mm dia and over, cut to length, bent to shape required including cranking bending, spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed confirmed to Fe 410-0 complete all as specified and directed.

Supply and fix of TMT bar 6 to 8mm dia, cut to length, bent to shape required including cranking bending, spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed confirmed to Fe 410-0 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well raming in layer not exe 25cm complete as specified and directed.

Removing exavated material ourside MD land exe 1.50km but n. exe 5km and depositing where directed complete as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone wall etc including racking out joints hacking for key scrbbing down with water completed all as specified and directed.

Material and Labour for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick work or concrete surfaces and finished with 5 mm thick plaster, both coats to be mixed with water proofing compound @ 2% by weight of cement or as per manufacturers instructions complete all as specified & directed. Note :- Supply only water proofing compound shall be measured and paid separately.

M&L for two coats of cement base paint over one coat of primer on new surface of wall including preparation of surface complete all as specified and directed.

M&L for one coat of cement base paint on old surface of wall including preparation of surface complete all as specified and directed.

M&L for providing plain cement concrete 1:3:6 type C-1(using 20mm graded stone aggregate) in coping including weathering, slightly rounded or chamfered angle and throating as directed including necessary form work complete all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC) any section including taking out embeded portion and making good distrubed ground on concrete , brick work, masonry etc and removing of demolished materials out side MD land complete all as specified and directed.

Dismantling of fencing wire mesh any type and size complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard / dense soil complete all as specified and directed.

M&L for cement concrete type C-2 , 1 : 3 : 6 (using 40mm graded stone aggregate) in foundation and filling concrete for columns, fencing posts etc complete all as specified and directed.

S& F for Mild steel angle iron cut to shape as directed drilling holes notching for wire as in posts and struts in fencing etc including all necessary cutting and welding etc and for similar work complete all as specified and directed.

S&F for mild steel screw bolts (machine cut) with hexagonal or square heads at one end and srewed the other or screwed both ends each screwed end to be fitted wth washers and one hexagonal or square nut, not exceeding 5 cm long and diameter of neck 5 to 10mm complete all as specified and directed.

M&L for PVC coated chain link fencing, size n exc 40mm x 40mm The dia of GI wire shall be 2.5mm to 3mm and thickness of PVC shall be 1mm to 1.5mm fixed to the posts complete all as specified and directed.

M&L for Preparation of new or previously untreated surface and applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces all as specified.

Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc complete all as specified and directed.

M&L for Mild framed works such as, etc as in large and small gates and grills , gratings and angles, tees , channels chainlink fenching etc, including hanging gates in pillar with proper pintle hinges, stops, hand made sliding bolts ,etc complete all as specified and directed.

M&L for roof trusses (framed) trussed, purlins, crange gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc (150micron) coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc(150 micron) coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repairs of Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and fixing to any of standard rails straining bolts, includig securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

Restraining & resecuring of Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and fixing to any of standard rails straining bolts, includig securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

S&F in repairs of razer type concenrtina coil,9SWG hot galvanised spring tensile wire 145 to 150 newton per square mm, zinc coating 250-300 gram per sqm ,dia of coil when unstretched 610mm minmum no of coils 10 per RM after laying hot dip galvanised razer ribbon tape of size 0.50 mm thick 19mm wide before wrapping of central corewire fixed with 1.66mm thick GI clips 25 nos per running meter and special nut bolts ,hold 'z' coil together and extrra two rows parrel wire of 10 gauge complete all as specified and directed by the EIC and Dismantling of razer type concertina coil with two parallel rows of wire remove of the debris outside MD land complete all as specified and directed.

M&L for Preparation of old steel surfaces of any description over 10cm width or girth and application of one coat of synthetic enamel paint etc,complete all as specified and directed.

Desitting/desludging completely area drain n.exc 30cm wide of any description including removing and refixing of cover slab & making good if any with same specification and removing of silt/sludge outside MD land complete all as specified and directed.

All as per item No. 51 above but for upto 450mm wide drain.

All as per item No.51 above but for upto 600mm wide drain.

Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified .

M & L for cement concrete 100 mm thick type , 1 : 2 : 4 B-2 ( using 20mm graded stone aggregate) as in drain, floor etc and finishing even and smooth without using extra cement complete all as specified and directed.

S&F in repairs Precast cement concrete louveres and jallies type B0, 1 : 2 : 4 (12.5mm graded stone aggregate), 25 mm thick (measured solid) including all mouldings but excluding frame and set in cement mortar 1 : 4 complete all as specified and directed.

M&L for Cement concreate type D-2 ,1 : 4 : 8 (using 40 mm, graded stone aggregate ) 75 mm thick laying in floor / paving complete all as specified and directed.

M&L for Chequered cement concrete tile 20CM x 20CM x 25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including cement mortar bedding 20mm thick in CM 1 : 6, 15 mm thick complete all as specified and directed..

M&L for crushed sand filling under floors or in foundations including watered and consolidation complete all as specfied and directed

M&L for Machine pressed precast concrete inter locking paver blocks of any shape and size conforming to IS 15658- 2006 of 60 mm thick M-35 grade with grey cement and pigment with glosey finish and including removing the existing paver blocks including removing of debries out side MD land complete all as specified and directed.

Dismantling floor, hearth or wall tiling any description and thickness including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for stone cladding Dholpur (natural stone) rough finish stone (15 to 20mm thick) cladding on verticle surface of beige colour shade with machine cut edges and cut to required size laid over a baking coat of 12mm thick cement plaster in C.M. 1:4 vertically close jointed, horizontal grooves between two layers and pointed of the stone, cleaning and removing all the dirt/cement on the stone to give the finishing a natural look all as specified and directed by Engr-in-Charge

M&L for Premix Ready Mix road repair patching compound for repairs to potholes damage Road repair any depth, including sweeping free from dust and mud or water, scouring sunken surfaces in roads, paths etc. cutting around edges to at least 25mm in depth, filling in screened and graded road metal, watering and well ramming etc complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes,200 mm jointed in cement mortar and taking out of trenches, if required complete all as specfied and directed.

S&F for 200 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specfied and directed.

Dismantling of cast iron or reinforced concrete drain pipes,300 mm jointed in cement mortar and taking out of trenches, if required complete all as specfied and directed.

S&F for 300 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specfied and directed.

M&L for concrete bed in cement concrete 1:3:6 type C2 to drain pipes of 200 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specfied and directed.

M&L for concrete bed in cement concrete 1:3:6 type C2 to drain pipes of 300 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specfied and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 1,56,350.00 (Minus) as listed in Schedule of Credit. Note1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'. Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

NIKAASH INFRACON (BID ID -3374312)

M/s Mukesh Engineers (BID ID -3383603)

mp construction co (BID ID -3373331)

PICON ENTERPRISES (BID ID -3383651)

Shah Enterprises (BID ID -3381610)

Shree Ayyappa Engineering (BID ID -3383961)

Peerzada And Sons (BID ID -3376397)

M/s Himanshu Tyagi (BID ID -3383985)