SPL REPAIRS TO HT OVER HEAD CONDUCTOR AND ALTRATION TO CONVERT INTO UG CABLE AT TB-2 UNDER AGE E/M-I AT GE ( CENTRAL) KIRKEE

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in soft/ loose soil for pole foundation / cable trench / stay assembly etc complete all as specified and directed by Engr in Charge

All as per item No- 1 above but depth exceeding 1.5 mtr and not exceeding 3 mtr complete all as specified for pole foundation complete all as specified and directed by Engr in Charge

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in soft disintegrated rock or for road cutting complete all as specified and directed by Engr in Charge .

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engr in Charge .

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr in Charge .

Dismantling steel pole/strut any size complete all as specified and directed by Engr in Charge

Dismantling cross arms of MS channels or angles section etc complete,setting aside for re use or carrying for credit complete all as specified and directed by Engr in Charge .

Dismantling insulator any type,any size complete all as specified and directed by Engr in Charge

Dismantling of ACSR conductor any type any size complete all as specified and directed by Engr in Charge

S&F steel tubular swaged pole complete with cast iron base plate , finial taper plug, bolts, nuts and screws confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type 410 SP-55 (11 mtr long) complete all as specified and directed by Engr in Charge . (Note: Earth wk & PCC measured separately under appropriate item of this schedule)

S & F Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint all as specified and directed by Engr-in-Charge

S & F ACSR conductor including jointing with existing conductor and stringing on pole and proper fastening to insulators with aluminium binding wires and required jumpering connection complete all as specified and directed by Engr in Charge

S&F Disc type insulator porcelain, vitrous 145mm high and 255 mm dia ball and socket type white, brown or green single disc with tension clamp for conductor for working pressure voltage 11000 V complete all as specified and directed by Engr in Charge

S&F pin type, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 150mm dia and 150 mm height for 11000 volts grade including dismantling taking out unsv one from Pole complete all as specified and directed by Engr in Charge .

S & F Loop type insulator, porcelian vitreous white, brown or green of size 90x140mm and clearence hole 25.5mm complete all as specified and directed by Engr in Charge .

M & L for Stay assy using 20mm dia rod complete with accessories as shown in electrical plate No 1 including dismentling taking out unsv one from Pole insulaters, Stay clamps, excavation & PCC measured separately) complete all as specified and directed by Engr in Charge

S&F for galvanised stay strand of size 7/4 mm Stay wire from Pole complete all as specified and directed by Engr in Charge

S&F Switch Air break verticle type, gang operated, triple pole, mechanically operated mounted on insulator of size 150mm dia and 150 mm height and steel frame with operating mechanism worked from ground level for current rating upto 200 Amps, 11000 Volts with locking arrangement complete incl dismentling taking down old unserviceable one complete all as specified and directed by Engr in Charge

S&F expulsion type drop out fuse, single pole, 11000 volts, 25 amps complete with insulator 150mm dia and 150 mm height complete set, verticle type including dismentling taking down old unserviceable one complete all as specified and directed by Engr in Charge

S&F of lightning arrestor, distribution class, System voltage-11KV, min rating-10KV, Discharge cap-10 KA, Line discharge class-1 complete with bracket and connection complete including dismantling/ taking down exiting one all as specified and directed by Engr in Charge

M & L for bore type chemical Earthing complete with GI electrode of 50mm bore buried in 3 mtr depth with ground enhancing backfill compound (Safe ground) , the compound should be highly conductive, Hygroscopic, non magnetic, non corrosive in nature and should have best moisture retaining quality including necessary returning filling in & removal complete all as specified and directed by Engr in Charge

S & L in trenches or fixed to pole or passing trough pipe XLPE insulated, screened, PVC bedded, galvanised steel strip armoured, overall PVC sheathed electric power cables (heavy duty) with aluminium conductor, 11000 volts grade (Earthed) cross sectional area 185 sq. mm 3 core complete all as specified and directed by Engr in Charge .

S&F Cable jointing kit for 11 KV (Earthed) grade cable for outdoor End termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 150 sq mm to 240 sq mm complete all as specified and directed by Engr in Charge .

M&L for GI tubing 100mm bore medium grade for cable protection under road crossing incl dismentling taking down unserviceable one complete all as specified and directed by Engr in Charge

M&L for sand cushioning for under ground cable provided with layer and sand 8 cm deep before laying the cable and 15cm after laying the cablecomplete all as specified and directed by Engr in Charge

M&L for PCC Cable cover HV Class Type -1 Flat of size 300mm x 180mm x 40mm complete all as specified and directed by Engr in Charge

M&L for cable route indicator duly embossed 11 KV for HT UG Cable of 11000 volts 80mm dia CI Plate marked on HT Cable bolted with 40x5mm flat iron of height 0.4mtr embedded in PCC 1:3:6 type C2 of size 20x20x30 cm block complete all as specified and directed by Engr in Charge

M&L for PCC (1:3:6) type C2 using 40mm graded aggregate as in foundation for filling in, mass concrete for pole, stay and transformer foundation complete all as specified and directed by Engr in Charge

M&L for PCC (1:3:6) type C1 using 20mm graded aggregate as in coping of new pole / repair to existing coping etc including necessary form workcomplete all as specified and directed by Engr in Charge

M& L for painting of HT 4/6 pole structure including cross arms ,channels,bracings,clamps,pipes etc complete with one coat of aluminum paint from above copping to top of pole complete all as specified and directed by Engr in Charge .

M& L for painting of HT 2 pole structure including cross arms ,channels,bracings,clamps,pipes etc complete with one coat of aluminum paint from above copping to top of pole complete all as specified and directed by Engr in Charge .

M&L for replacement of Danger notice plate 1.6 mm thick mild steel sheet,vitreous enamelled white, with letters,figures and convensional skull and bornes in signal red colour and fixed with MS clamps,bolts and nuts of approved size,HT 11000 volts,25x20 cm size complete all as specified and directed by Engr in Charge .

Rama Electricals

Techmat trading solution

Mahindra Electric Stores

MANGAL ELECTRICAL STORES

Suchit constructions

M/S. Niksun Electro-Infra Private Limited

metro electrical services

ONKAR ELECTRIC AND GENERAL STORE