Certain repair to steel furniture under GE (East) Ferozepur Cantt.

Amount

ALMIRAH LARGE / MEDIUM STEEL Supply & fixing as in replacement of unserviceable Legs made out of PBI sheet 1 mm thick of almirah large steel including cutting, welding, turning, bending etc. Rest all as per drg, and directed by Engineer-in-Charge/ GE.(FD-67(M), FD-1031)

All as per Ser item No. 1.00 here-in-before but replacement of unsv Shelves made out of PBI sheet 1 mm thick.

All as per Ser item No. 1.00 here-in-before but replacement of unsv Mild steel chromium plated(CP) handle 120 mm with Bush of approved quality

All as per Ser item No. 1.00 here-in-before but replacement of unsv Mild steel lock 65 mm with screw, key plate and keys of approved quality

All as per Ser item No. 1.00 here-in-before but replacement of unsv Locking device complete as per drg.

All as per Ser item No. 1.00 here-in-before but replacement of unsv Locking device cover complete as per drg and directed by Engineer-in-Charge.

All as per Ser item No. 1.00 here-in-before but welding to Almirah large steel

LOCKER STEEL Supply & fixing as in replacement of unserviceable Legs made out of PBI sheet 1 mm thick of Locker steel including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE.(FD-1029)

All as per item ser No 8 here in before but replacement of unsv bottom sheet made out of 1 mm thick ms sheet.

All as per Ser item No. 8 here-in-before but replacement of unsv stainless steel (CP) coated handle 100 mm of approved make all as directed by Engineer-in Charge.

All as per Ser item No. 8 here-in-before but replacement of unsv MS hasp and stapple 75 mm.

Supply & fixing as in replacement of UNSV PBI parts of almirah large/ Med steel including cutting, welding, turning, bending etc. Parts should be made out of PBI sheet 1 mm thick all as shown on drg, rest all as specified and directed by Engineer-in-Charge/ GE.(FD-67(M), FD-350, FD-1031 & FD-1032

TABLE DINING OR STEEL AL TOP Supply & fixing as in replacement of unserviceable Top made out of 19 mm thick block board commercial Ist quality covered with aluminium sheet 24 guage thick with steel screws including cutting, welding, turning, bending etc of unserviceable components /parts of table dining OR's steel all as shown on drg, as specified and directed by Engineer-in-Charge/ GE. (FD-84(M)

All as per Ser item No. 13.00 here-in-before but replacement of unsv Top frame, side, legs and stiffeners made out of MS square conduit 25 mm having 1.6 mm wall thickness.

All as per Ser item No. 13.00 here-in-before but replacement of unsv PVC toe black in colour of good quality.

TABLE OFFICE OFFRS STEEL Supply & fixing as in replacement of unserviceableTable top made out of 18 mm thick Prelaminated particle board (Make- Novapan, Century ply, ActionTessa) commercial quality bonded with phenol formal dehyde including 4mm thick teak wood beading all around the table fixed with nails with polish the beading, including cutting, welding, turning, bending etc rest all as shown on drg FD-84 M/1003 and directed by Engineer-in-Charge/ GE:-

All as per Ser item No. 16.00 here-in-before but replacement of unserviceable drawer complete including necessary denting, repairing, welding bottom channel complete all as directed.

All as per Ser item No. 16.00 here-in-before but welding toTable office officer steel

All as per Ser item No. 16 .00 here-in-before but replacement of unsv Rubber Shoes black in colour of approved quality.

TABLE OFFICE CLKS STEEL Supply & fixing as in replacement of unserviceableTable top made out of 18 mm thick Prelaminated particle board (Make- Novapan, Century ply, ActionTessa commercial quality bonded with phenol formal dehyde including 4mm thick teak wood beading all around the table fixed with nails with polish the beading including cutting, welding, turning, bending etc, rest all as shown on drg FD-84M/1004 and directed by Engineer-in-Charge/ GE:-

All as per Ser item No. 20.00 here-in-before but replacement of unserviceable drawer complete including necessary denting, repairing, welding bottom channel complete all as directed.

All as per ser item No 20 here-in-before but welding to table office clks steel

All as per ser item No 20 here-in-before but replacement of rubber shoe of approved quality.

TABLE 3X3 STEEL Supply & fixing as in replacement of unserviceable Table top made out of 18mm thick Prelaminated particle board (Make- Novapan, Century ply, ActionTessa teak faced bonded with phenol formal dehyde including 4mm thick teak wood beading all around the table fixed with nails all as shown in drg, including cutting, welding, turning, bending etc all as shown on drg and directed by Engineer-in-Charge/ GE:-FD-1009

All as per Ser item No. 24.00 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per Ser item No. 24.00 here-in-before but welding to Table 3' x 3'

TABLE 3X2 STEEL WITHOUT DRAWER Supply & fixing as in replacement of unserviceable Table top made out of 18 mm thick Prelaminated particle board (Make- Novapan, wintuff, ActionTessa teak faced bonded with phenol formal dehyde including hard wood (Teak) beading 19x6mm all around the table fixed with nails all as shown in drg. ( Note:- Joints in particle board shall not be accepted in any case). of table 900x600mm steel without drawer including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE:-FD-1007

All as per Ser item No. 27.00 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per Ser item No. 27.00 here-in-before but replacement of unserviceable PVC toe black in colour of good quality.

TABLE 3X2 STEEL WITH DRAWER Supply & fixing as in replacement of unserviceable Table top made out of 18 mm thick Prelaminated particle board (Make- Novapan, wintuff, ActionTessa teak faced bonded with phenol formal dehyde including hard wood (Teak) beading all around the table fixed with nails with polish the beading, rest all as shown in drg. ( Note:- Joints in particle board shall not be accepted in any case). of table 900x600mm steel with drawer including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge/ GE:-FD-1008

All as per Ser item No. 30.00 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per Ser item No. 30.00 here-in-before but replacement of unserviceable PVC toe black in colour of good quality.

All as per Ser item No. 30.00 here-in-before but replacement of unserviceable drawer complete including necessary denting, repairing, welding bottom channel complete all as directed.

CHAIR CBA STEEL Supply & fixing as in replacement of unserviceable bottom seat of chair CB steel with arms made out of 1st class seasoned hard wood sheesham duly caned with 2 to 2.5 mm wide white cane plastic as Godrej Pattern. Make SHAH/Premier including two coats of synthetic enamel paint black over coat of pink primer of chair CB steel with arm all as shown on drg, as specified and directed by Engineer-in-Charge/ GE. FD-75

All as per Ser item No. 34.00 here-in-before but replacement of unserviceable back.

All as per Ser item No. 34.00 here-in-before but replacement of unserviceable arm made from 1st class seasoned sheesham wood of chair steel with arms including two coats of synthetic enamel paint black over a coat of pink primer.

All as per Ser item No. 34.00 here-in-before but S & F flat iron 535x25x6 mm as in stiffener to support seat frame of chair CB steel with arms including cutting welding etc.

CHAIR CBB STEEL Supply & fixing as in replacement of unserviceable bottom seat of chair CB steel without arms made out of 1st class seasoned hard wood sheesham duly caned with 2 to 2.5 mm wide white cane plastic as Godrej Pattern. Make SHAH/Premier including two coats of synthetic enamel paint black over coat of pink primer of chair CB steel without arm all as shown on drg, as specified and directed by Engineer-in-Charge/ GE. FD-75

All as per Ser item No. 38.00 here-in-before but replacement of unserviceable back.

All as per Ser item No. 38.00 here-in-before but S & F flat iron 420x25x6 mm as in stiffener to support seat frame of chair CB steel without arms including cutting welding etc.

FMN SET Painting of FMN set of charpoy GI pipe/newar with black Japan paint with brush including welding complete all as specified and directed by Eng- in-Charge/ GE.

FORM WITHOUT BACK Removing old unsv parts/ components of form without back off size/shape and materials all as specified and directed as shown on drg. Replacement of unsv wooden planks made of 2nd class hard wood 1525x255x25mm thick fixed with GI nut & bolt 65mm x 6mm with washer complete all as specified and directed as shown on drg FD-1027.

M&L for French polish on wooden plank and 2 coat of synthetic enamel paint over a coat of primer on steel surface.

TEAPOY VARANDAH STEEL Supply & fixing as replacement of the following unsv component/parts of Teapoy verandah steel including cutting, welding, turning bending etc complete all as specified and shown in drg Teapoy top made out of 18mm thick Prelaminated particle board of white bonded with phenol formal dehyde including 4mm thick teak wood beading all around the table fixed with nails rest all shown in drg FD-383. Make- Novapan, Century ply, ActionTessa

Replacement of MS Flat iron 490x20x3mm to be welded with frame under bottom seat complete all as specified and directed

Replacement of unsv rubber shoes of approved quality to teapoy verandah complete all as specified and shown on drg

TEAPOY VARANDAH MAP Supply & fixing in replacement of unsv Top of Teapoy verandah MAP. Teapoy top made out of 18mm thick Prelaminated particle board (Make- Novapan, Century ply, ActionTessa of white bonded with phenol formal dehyde including 4mm thick teak wood beading all around the table fixed with nails rest all shown in drg FD/E6/MAP/17 and directed by Engineer in Charge.

Charpoy GI pipe ply Top : Removing of old unsv ply top from charpoy GI pipe FD-220 and supply and fixing new 12 mm thick plywood BWR grade ISI Marked with 75 mm long x 6 mm dia full threaded nut and bolts with washer in bothside by drilling 2 Nos of hole in long rail and 2 Nos of hole on short rails. Corners of plywood fixed on charpoy should be rounded off properly complete all as specified and directed by Engineer - in -Charge. Make : Archid/Century ply/Kitply.

S & F new iron strip to be welded with long rail of charpoy GI pipe FD-220 of size 900x30x5 mm thick duly black painted in 2 Nos on long rails below ply wood top.

Removal of unsv long rail from existing frame of charpoy of GI pipe FD-220 and supply and fixing of new long rail made out of GI pipe 32mm nominal bore medium grade ISI marked all as specified and shown on drg.

Removal of unsv short rail from exiting frame of charpoy of GI pipe and fixing of short rail made from unsv long rail retrieved from charpoy GI pipe against Ser No.50 above after cutting threading of both ends to the requires size complete all as specified and shown on drawing.

Removal of unsv leg from existing frame of charpoy GI pipe and fixing legs by making from unsv short rail retrieved from charpoy GI pipe as per item No 51 here-in-before including cutting threading complete and providing best quality PVC shoe to the legs of charpoy GI pipe . Rest all as specified and directed by Engineer-in-Charge.

Removal of unsv elbow three way 32mm bore from existing frame of Charpoy GI pipe FD-220 and supply and fixing new elbow GI three way32mm bore medium grade ISI marked all specified and shown on drawing FD-220.

Removal of unsv check nuts from existing frame of charpoy GI pipe & supply and fixing new check nuts GI 32mm bore medium grade ISI marked all specified and shown on drawing FD-220.

Tightening of charpoy GI frame complete all as per drawing.

Welding of FMN clamps to the legs of charpoy GI pipe all as per drawing

Bed Hard Map :Removing of old unsv plywood from Bed Hard MAP FD/E6/MAP/8 (R) and supply and fixing new 12 mm thick plywood BWR grade ISI Marked of required size and shape including supply & fixing necessary nut and bolts and washer whereever required to Bed Hard MAP. Rest all as specified and directed by Engineer - in -Charge. Make : Archid/Century ply / Kitply

Supply & fixing of following components/parts of Bed Hard MAP in replacement of unsv head rest made out of 18mm thick prelaminated particle board exterior quality with PVC edging / teak wood beading all round the top of Bed hard MAP including dismantling of unsv components all as specified shown on drg FD/E6/MAP/8 (R). Rest all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 57 here-in-before but replacement of unsv foot rest of Bed hard MAP, rest all as per Drg and directed by Engineer-in Charge.

Charpoy MS Pipe : Removing of old unsv plywood from Charpoy MS Pipe FD/MAP-II/01 and supply and fixing new 12 mm thick plywood BWR grade ISI Marked with supply & fixing necessary nut and bolts including washer to bothside of Charpoy MS pipe Rest all as specified and directed by Engineer - in -Charge. Make : Archid/Century ply / Kitply

PAINTING TO STEEL FURNITURE Material & labour for painting to Almirah steel medium with shelves complete internal and external including top and bottom. after preparation of old painted surface and making smooth surface for spray painting inside/outside with synthetic enamel paint olive green, black or white shaded as per drawing & directed by Eng- in-Charge. FD-67(M)

All as per Ser itemNo. 61.00 here-in-before but on Locker bed side steel medium with shelves complete external including top & bottom. FD-1029

All as per Ser item No 61.00 here-in-before but on almirah large with shelve complete internal and external including top and bottom.FD-1031/MAP

All as per Ser itemNo. 61.00 here-in-before but on almirah large with shelves complete external including top and bottom.FD-1032/MAP

All as per Ser itemNo. 61.00 here-in-before but on Locker steel complete internal and external including top, bottom & shelves.FD-222

All as per Ser itemNo. 61.00 here-in-before but on Locker steel complete external including top & bottom and shelves.FD-223

All as per Ser item No. 61.00 here-in-before but on Form without back

All as per Ser itemNo. 61.00 here-in-before but on Table office clerk steel.FD-84(M)

All as per Ser itemNo. 61.00 here-in-before but on Table office officer steel.FD-84(M)

All as per Ser item No. 61.00 here-in-before but on Table 900x900x760 steel.FD-1009

All as per Ser itemNo. 61.00 here-in-before but on Table 900x600x760 steel with drawer/without drawer.FD-1007

All as per Ser itemNo. 61.00 here-in-before but on Teapoy verandah.FD-255/MAP

All as per Ser itemNo. 61.00 here-in-before but on Chair CB steel with or w/o arms.FD-75(M)

All as per Ser item No. 61.00 here-in-before but onTable dining OR steel AL top FD-84(M)

All as per item ser No 61.00.here in before but painting to Bed Hard MAP complete all as directed by Engineer-in Charge.

All as per item ser No 61.00 here in before but to charpoy MS pipe complete all as directed by Engineer-in Charge.

Supply & fixing in replacement of unsv Teak wood beading of all round the top of verious type of wooden furniture, all as specified shown on drg, Rest all as per drg. and directed by Engr-in-charge

M/S CHAWLA CONSTRUCTION COMPANY

M/s Sham and Company

shivam builders