Restoration of dyke on L/B of river Katakhal from Boroitoli to confluence including breach closing works. PACKAGE 1 RETENDER

Amount

Felling trees including uprooting roots and stumps up to 50 cm. below ground, cutting into pieces and removing the same from the site of work etc. complete as directed. Trees above 0.50 m and up to 1 m girth:

Cutting bamboo, uprooting roots & stumps including removing them from the site of work, etc. complete as directed.

Uprooting bamboo clumps where bamboo already removed including removing stumps to a minimum distance of 30 m etc., complete as directed.

Earthwork in bank trimming to the designed section/slope by manual means including removing the trimmed soils to a minimum distance of 30 m, complete as directed.

Supply of Geo-textile bags of type-A (1.03 × 0.70 m) inner to inner made of Geo-textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653:2017 i. Wide Tensile strength (MD) ≥ 20KN/m & Wide Tensile strength(CD) ≥20 KN/m ii. Elongation (MD) ≥50% & Elongation (CD) ≥ 50% iii. Abrasion ≥ 95% iv. Trapezoidal Tear Strength (MD) ≥ 450N & Trapezoidal Tear Strength (CD) ≥ 450N v. CBR Puncture strength ≥ 4000N vi. Permittivity ≥ 1.10s – 1 vii. Permeability ≥ 40l/m2/sec viii. AOS ≤ 75 micron ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% x. Mass ≥ 400 gm/m² xi. Thickness at 2KPa ≥ 3 mm xii. Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO (Certified Laboratory should invariably be submitted against each batch of material)

Supply of Geo Bags Type-B (Size 2.00m × 1.50m inner to inner) (Pillow Type) made of composite layers of Polypropylene (PP) fibre as per IS 16653:2017 for Nonwoven and IS 16654:2017 for Woven: Woven Geo-textile for the outer cover (300gsm): The woven geo textile is woven with multifilament woven fabric manufactured from ultra violet stabilized polypropylene. Geo-textile used to manufacture geo-textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids. Properties i. Tensile strength (MD) ≥ 80 KN/m & Tensile strength (CD) ≥ 70 KN/m ii. Elongation (MD) ≤ 25% & Elongation (CD) ≤ 25% iii. Abrasion ≥ 75% iv. Trapezoidal Tear Strength (MD) ≥ 1500N & Trapezoidal Tear Strength (CD) ≥ 1300N v. CBR Puncture strength ≥ 900N vi. Permeability ≥ 18 l/m2/sec vii. AOS ≤ 250 micron viii. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% ix. Mass ≥ 300 gm/m² x. Seam strength ≥ 50 % of actual fabric strength. Non-Woven Geo-textile for the inner layer (300gsm):It is needle punched non-woven geo-textile made of 100% polypropylene staple fibres which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Properties i. Wide Tensile strength (MD) ≥ 15 KN/m & Wide Tensile strength (CD) ≥ 15 KN/m ii. Elongation (MD) ≥ 50% & Elongation (CD) ≥ 50% iii. Abrasion ≥ 95% iv. Trapezoidal Tear Strength (MD) ≥ 340 N & Trapezoidal Tear Strength (CD) ≥ 340 N v. CBR Puncture strength ≥ 3000 N vi. Permittivity ≥ 1.25 s-1 vii. Permeability ≥ 60 l/m2/sec viii. AOS ≤ 75 micron ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% x. Mass ≥ 300 gm/m² xi. Thickness at 2KPa ≥ 3 mm xii. Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge. (Bags are to be supplied of 15 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material)

Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653: 2017 • Wide Tensile strength (MD) ≥ 15kN/m & Wide Tensile strength (CD) ≥ 15kN/m • Elongation (MD) ≥ 50% & Elongation (CD) ≥ 50% • Abrasion ≥ 95% • Trapezoidal Tear Strength (MD) ≥ 340 N & Trapezoidal Tear Strength (CD) ≥ 340 N • CBR Puncture strength ≥ 3000 N • Permittivity ≥ 1.25 s-1 • Permeability ≥ 60l/m2/sec • AOS ≤ 75micron • UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% • Mass ≥ 300gm/m² • Thickness at 2KPa ≥ 3 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer, Batch Number & its dimensions clearly on each roll with “WRD Govt. of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).

Galvanized Wire Netting Sheet made of 8 SWG wire 152mm square mesh in sheet 2.57m × 1.66m with longitudinal wire at 152 mm centre and 76mm projection of each wire on all sides beyond the net size of 2.42m × 1.5m having knots of 12 SWG at every joints, weight of each sheet should not be less than 6.3 Kg/sheet.

Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon)

Carriage of Geo Bags of size 1.03 × 0.70 m / 1.0 x 0.7m including loading & unloading, stacking, etc. complete and including hire charge of truck with driver and handyman cost of POL etc. completed as directed.(Distance to be calculated from Guwahati)

Carriage of Geo Bags of size 2.00 × 1.50 m including loading & unloading, stacking cost of P.O.L. etc. complete and including hire charge of truck with driver and handyman, etc. completed as directed. (Distance to be calculated from Guwahati)

Carriage of 300 gsm Geo sheet of including loading & unloading, stacking cost of P.O.L. etc. complete and including hire charge of truck with driver and handyman, etc. completed as directed. (Distance to be calculated from Guwahati)

Filling and laying in cage with sand/silt filled Geo bags of size 1.03m × 0.70m including excavation of sand/silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly. in cages made of wire netting sheets of size 2.57 × 1.66m of 8G galvanized wire making the cage from 2 nos. of wire netting sheet by tying the projected wires complete as directed. (Geo Bag, Wire Netting Sheets and Polypropylene thread will be supplied by the department free of cost) Without Boat

Filling and laying of nonwoven Geo-textile bag of dimension 2.00m × 1.50m including excavation of sand/silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand/silt, having minimum volume 0.612 Cum after filling,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100 m complete as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) (With Mar Boat)

Earth work in excavation in foundation of filter drain in all kinds of soil to the designed section and levels along the river bank slope including deposition the spirits in safe distance and with all leads & lifts complate as directed.

Collection and supply of brick bats 10 - 40 mm size to work site including loading, unloading transportation and stacking in measurable stacks including sale tax, compensation if any, etc. complete as directed

Local carriage of boulder, metal, gravel/sand etc. from the approachable site beyond 150 m and up to 3.00 Km from the work site including loading from stack and unloading at work site with 10 (Ten) ton capacity truck, supplying P.O.L. etc. complete as directed.

Labour charge for laying Geo fabric sheet as filter bellow pitching including carrying, lapping, wrapping & stitching as directed by the Engineer-in-Charge.

Labour charge for filling the inverted filter drain both horizontal/vertical drain/filter medium with river shingles of size 10-38mm in layers, / brick bats of size 10-40mm to the designed sections and levels including local carriage of materials from a distance of 150m complete as directed.

Filling and laying of Geo bags of size 1.03 m × 0.70 m including excavation of sand/silt of size more than 80 micron from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150 m and laying properly as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) (Without Boat)

Supply of Pre stressed Cement Concrete (PSC) Porcupine members of size 0.10 m × 0.10 m × 3.00 m with M - 30 grade of cement concrete conforming to IS 1343:2012 using super-plasticizer @1.2 lit/bag of cement with graded broken coarse aggregates up to 20 mm size down conforming to IS 10262:2009 & IS 456:2000 and reinforced with 4 nos. of 4 mm dia. high tensile steel wire cable/strand with necessary cover and 4 mm high tensile stirrups at 250 mm C/C, in conformity with IS-6403:R2002 and stressed to required strength not exceeding 9.18 N/mm, holes of 16 mm dia. at 50 cm inside from both ends in the same face and in either face of post another 2 nos. of holes of size 16 mm dia. at 65 mm inside from both ends including properly curing for 21 (Twenty one) days and carriage of porcupine members from factory to the stack yard within a distance up to 50 Km including loading, unloading & stacking complete as directed.

Carriage of PSC porcupine members of size 0.10 m × 0.10 m × 3.00 m from Stack yard to Work Site including loading, unloading & stacking

Labour charge for launching of PSC Porcupine including carriage of PSC porcupine members of size 0.10 m × 0.10 m × 3.00 m from the stack yard to the place of launching, erection of the Porcupine with 6 (Six) members properly, supply & fitting/fixing with 12 mm dia. 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) Launching without boat.

Labour charge for launching of PSC Porcupine including carriage of PSC porcupine members of size 0.10 m × 0.10 m × 3.00 m from the stack yard to the place of launching, erection of the Porcupine with 6 (Six) members properly, supply & fitting/fixing with 12 mm dia. 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) Launching by boat:

Earth work in embankment by Mechanical means by truck carriage with locally available ordinary/normal soil excluding sandy and rocky soil free from roots & vegetation and filling in uniform layers not exceeding 25 cm thick including ploughing or roughening or benching the seats, removing all debries, breaking clods up to 4cm cube, dressing as per design section and compaction in layers not exceeding 30 cm in thickness and core cutter soil test at every layer and every 500m distance, etc. complete as directed. A. Compaction with three wheel static roller of 80-100 kN capacity For beyond initial 1 Km & upto 10.00 Km & for all lifts

Construction of temporary shed of two roof with mud plinth of 0.45 m height above ground level with Bhaluka bamboo post 1.5 m apart, driven at least 0.75 m below ground and height above plinth of 2.5m. Split Jatti bamboo/tarza wall 10 cm thick touch roofing over bamboo rua frame, placing at 0.15 m clear apart, fitted with bamboo kamies from binding doors and windows with Bamboo Chattai, strengthening with Bamboo frame binding with wire, roofing with TATA Shaktee roofing sheets etc., complete as directed. (Using Bhaluka Bamboo at the rate of 6.00 nos./Rm &Jati Bamboo at the rate of 61.00nos./Rm)

Manufacturing, supplying and fixing retro reflective sign boards of size 1.22m × 0.76 m made up of 4 mm thick aluminium sheet,face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (Bi-lingual), symbols and borders etc. as per IRC: 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to Class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm C/C to back support frame of M.S. angle iron of size 25 × 25 × 3 mm along with theft resistant measures, mounted and fixed with 2 nos. of 900 mm thick pipe vertical post (AISI 202 Grade) of length 3750 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cm × 30cm × 30cm etc.complete. and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of Zinc chromate yellow primer (Vertical post to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-Charge

Providing and Laying Reinforced Cement Concrete Pipe NP4 as per design in Single Row Providing and laying reinforced cement concrete pipe NP4 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. 1000mm dia

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars

Excavation for Structures Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out,construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Rate as per item No.11.1 of Chapter 11

Earth work in excavation of drainage channel to the proper grade and slopes as required including disposing the excavated debris/soil to a safe distance of minimum 50 m distance, etc. complete as directed.For Lead upto 50 m and all lifts. Wet & Sticky Soil

Filling and laying of Geo bags of size 1.03m × 0.70m excluding excavation of sand/silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling , double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Sand/silt, Geo Bag and Polypropylene thread will be supplied by the department free of cost) (Without Boat)

Collection and supply of River silt by truck carriage free from debries and other foreign material, etc. complete as directed. By Mechanical Means For initial up to 1.00 Km & for all lifts.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204. A With crushed STONE II. P.C.C. grade M 20 .i) Nominal mix (1:2:4)

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204. A With crushed STONE IV.RCC Grade M 25 i) For height upto 5 m

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

M S Plate 6 mm for Shtter

M.S. Angle 75 x75 X 6 mm mm for stiffener

M.S.Channel 75x75 mm for guide

M.S.Angle 75 x 75 x 6 mm for guide

M.S.Channel 75X 75 mm for top and bottom

M.S Shaft 75 mm diameter

G.I.Pipe 25 mm

HD Thrust bearing 50 mm dia

Nuts and botls, assorted size

M.S.Electrodes 8 swg

painting brush 3"

wire brush

Emery paper

Antisol red oxide paint

Terpentine oil

2 TPI thread cutting including fine finishing for 40 mm dia shaft.

D.A. Gas

Oxygen gas for all works

75mm x75 mmx 6 mm size MS angle for gangway posts and railing

MS plate 6 mm size for gangway

Waste cotton

C.I. Boss size 125 mm x150 mm with internal thread cutting 2TPI making groove for bearing slot for lock plate and 1.5'' drill for providing handle as per direction

M.S.Lock plate 300x300 mm size with 8mm plate thickness including supply of materials.

Clamp for lock plate

M.S. base plate 300x300 mm size with 10mm plate thickness including supply of materials.

12 mm size shaft pin with length upto 150 mm

Redoxide Primer

Painter

Fitter Grade 1

Ordinary / unskilled labour

Installation and Commissioning of Sluice Gate

M/S R.A.Mazumder

JAKIR HUSSAIN BARBHUIYA