SUPPLY OF CHAIN and chain SPARES FOR AUXILIARY CANE CARRIER

Spares for Auxiliary Cane Carrier chain (Pitch 150mm) as per our drawing no. SCSM-NP-022, Rev-01

Inside Link (Item no. 1) Material : EN-09

Outside link (Item no. 2) Material : EN-09

Outside link, Cut type (Item no. 3) : EN-09

Bush (Item no. 4) Material : EN-353

Pinwith M20 Nylock nut (Item no. 5) Material : EN-351

Roller (Item no. 6) Material : IS:2062

M. S.Slat for auxiliary cane carrier150 mm Pitch chain as per drg. No. SCSM/NP-024. Material: M.S.: IS: 2062, Finish weight 18.4 Kgs/ each Appx.

Spares for Main Cane Carrier chain (Pitch 200 mm) as per our drawing no. SCSM-Mills-245

Outside link, Cut Type (Item no. -1) Material : 55 C8, IS:1570 -1979

Outside link(Item-1A) Material : 55 C8, IS:1570 -1979

Inside link (Item-2) Material : 55 C8, IS:1570 -1979

Pin with M25 Nylock nut (Item-3) Material : EN-353

Bush(Item-4) Material : EN-351

Roller(Item-5) Material : EN-8

M. S.Slat for main cane carrier200 mm Pitch chain as per drg. No. SCSM-Mills-246. Material: M.S.: IS: 2062, Grade ‘A’ Finish weight 25 Kgs/ each Appx.

Spares for Bagasse carrier chain (Pitch 150 mm) as per our drawing no. SCSM/NP-U91, Rev.-B

Inside link (Item no. 1) Material : EN-19

Outside link(Item no. 2) Material : EN-19

Outside link, without attachment/ Cut type (Item no. 2a) Material : EN-19

Outside link, with Attachment/ Cut type (Item no. 2b) Material : EN-19

Roller (Item no. 3) Material : EN-8

Pin with 7/8” B.S.W. castle nut (Item no. 4/8) Material : EN-353

Bush (Item no. 5) Material : EN-353

Rack attachment pin with M18 nut (Item no. 6) Material : EN-8

Racks for intermediate carrier fabricated from M.S. plates as per drawing no. SCSM-MILLS-269, Revision ‘C’

Metlon Pad as per drg No. SCSM-Mills-275 Item no. 1

M.S. stopper plate as per drawing No. SCSM-Mills-275 Item no. 2

Block type forged chain having 229 mm pitch (duly assembled) for main rake elevator and inter rake carriers as per our drawing no SCSM-MILLS-310.

Pin with nylock nut for forged steel block type chain as per drawing no. SCSM-MILLS-310

Overhauling of block type forged chain as per our drawing no. SCSM- Mills- 310 (Overhaul). Main jobs to be carried out: 1 Removal of ovality of holes rack attachment pads and welding of broken pads with links. 2 Replacement of worn out pins with M30 nylock nuts, washers and split pins. 3 Provision of both pin stopper pads. 4 Fitting of new bushes after removal of ovality with maintaining the pitch i.e. 229 mm ±0.3, wall thickness of bushes should suit the pin diameter. 5 Replacement of worn out bushes (Material - SS : 410). M.O.C. should be Strictly as per our drawing with test certificate.