CA NO GE/AFJ-41/2024-25 REPAIR/MAINTENANCE OF PLASTER CHAJJAS PLINTH PROTECTION RAIN WATER PIPE AND OTHER MISC B/R WORKS AT AF STATION UNDER GEAF JAMMU

Amount

Taking down cement plaster,existing wall tile/mosaic in any thickness including racking out joint hacking for key scrubing down with water etc complete all as specified and as directed.

Material and labour for 15 mm thick rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces on walls mixed with integral WPC by weight (WPC shall be measured and paid in seprately).complete all as specified. Note:- 1.The plaster shall be executed in patches as per ground requirement at any where and upto the any height and contractor shall have to provide formwork as per ground or upto any height including necesaary safety precaustion should be carried out for site execution, No extra payment will be paid by department.

Material and labour for 5 mm rendering in CM 1:3 on ceiling of concrete surfaces finished complete all as specified as directed by Engineer-in-Charge.

Supply only integral water proofing compound ISI marked complete all as specified and directed by Engr-in-Charge.

Dismantling of RCC roofs ,shelves, facia beams ,chajjs and similar suspended work etc complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (20 mm graded stone agg) as in shelves, facia beams ,chajjs and similar suspended work including necessary form work,scaffoholding upto 4th storey ht. of bldg also use anti rust agent chemical on existing reinforcement etc complete all as spd and directed. Note:- No extra payment will be paid to contractor by the department.

M&L for TMT bars 8 mm dia cut length bent to shape required including cranking bending spirally for hooping for column , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia. as specified and directed.

M&L for repairing of chajja, concrete floor , balconies by providing and applying of water proofing of 3 coat pidicrete URP with fibre cloth (Make Pedilite) and 2 coat of membrane of star chemicals in cement mortar as per manufactural instruction and directed by Engr-in-Charge. Including cleaning the concrete surface with wire brush or scruber to remove dirt and loose particals and repair concrete portion and priming of concrete surface by using above material.complete all as specified and directed.

Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced) all as specified an directed by Engr-in-Charge.

M & L for cement concrete 1:2:4(Type B-2), 75 mm thick using 40mm graded stone aggregates as in plinth protection finished fair and even,laid to an outward slope of not less than 1:12,plinth protection shall be cast in panels not exceeding 2.00 sqm area with 6mm wide joint between the plinth protection panels,10mm joint between wall and plinth protection and filled with bitumastic filler complete all as specified and directed by Engr-in-Charge

M&L for PCC 1:4:8 type D-2(Using 40 mm graded crushed stone aggregate) as in foundations,filling and mass concrete.complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete pre-polished interlocking tiles (any pattern) 25-30mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished with grey cement and no pigment, laid over 20 mm thick bedding layer of cement mortar 1:4.complete all as specified and directed by Eng-in-Charge. Note:- 1.Pattern and design of interlocking tiles (any pattern) should be approved by GE.no extra cost will be bourne department.

M&L for PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, cills, steps, kneelers, bed plates, apex stones kerbs and similar work including necessary form work.complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets.complete all as specified and directed.

S & F for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing with fillets ,fittings and fixture with all accessories etc as per approved design as complete all as specified and directed by Engr-in-Charge.

Supply and fixing hollow PVC ceiling lining consisting of 5 to 6 mm thick colour/ printed PVC sheet including fillets,GI frame work,fittings and fixture with all accessories as per approved design,drawing complete all as specified and directed by Engr-in-Charge.

S &F exposed metal frame ceiling with calcium silicate board (8mm thickness)of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately).complete all as specified and directed.

S&F Gl frame work (size of grid 605x605mm) for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-Charge.

Dismantling of asbestos cement sheets, corrugated or semi corrugated etc in roof covering complete and set a side all as dspecified and as directed.

S& F in repairs pre-painted galvalume aluminium zinc coated corrugated sheet (including pre-laminated guard film) 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S& F in repair poly-carbonate sheet of 10mm thick in any colour and any pattern,fix with aluminium jointing strip,including joints filling with silicon,self tapping screws etc complete all as specified and directed by Engr-in-Charge.

Taking up CI pipes,SWR pipes (incl all fittings),bend , floor traps with spigot and socket ends and lead joints incl burning out joints and removing lead of 100mm dia pipe.complete all as specified and directed.

Taking up CI pipes,SWR pipes (incl all fittings),bend , floor traps with spigot and socket ends and lead joints incl burning out joints and removing lead of 75mm dia pipe.complete all as specified and directed.

S&F in PVC (SWR) pipes of size 75mm dia with single socket joints fixed to wall with stack clamp and rubber ring joints.complete all as specified and directed by Engineer-in-Charge

S&F in PVC (SWR) pipes of size 110mm dia with single socket joints fixed to wall with stack clamp and rubber ring joints.complete all as specified and directed by Engineer-in-Charge

Description all as per item no 25 above Re fixing only all as specified and directed by Engg-in-Charge.

Description all as per item no 26 above Re fixing only all as specified and directed by Engr-in-Charge.

S & F PVC (SWR) bends of any radius with access door bore of pipe 110 mm.complete all as specified and directed.

S & F PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and directed.

S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and directed.

S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm complete all as specified and directed.

Dismantling of wrought iron,mild steel work such as angle iron,flate and similar type work or any description not otherwise provided complete all specified and directed.

M&L Mild Steel sections confirming to FE-410-W as in framed work (ornamental and special design) as in doors, gates of angles or other section with gusset plates, rails etc including necessary cutting, drilling, welding etc complete all as per directed by Engr-in-Charge. Note: - Contractor shall not have any claim in respect of design/ ornamental shape/ designer member and for the same, no extra cost shall be paid to the contractor by Department.

M&Lfor preparation of newly plastered surfaces of walls,applying two coats of distemper with oil emulsion over a coat of primer over a thin layer of wall care putty including necessary formwork scaffolding required upto the 4th storey complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of exterial emulsion paint on walls including a thin layer of wall care putty,necessary formwork scaffolding required upto the 4th storey complete all as specified and directed.

M&L prepration of new surfaces of ceiling and apply three coat of white wash on surface of ceiling.complete all as specified and directed.

M&L for preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-Charge.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

M/s Sunny Gupta (BID ID -3120584)

M/S CHOUDHARY TRADERS (BID ID -3118805)

M/S MOHAN LAL SHARMA (BID ID -3121637)