GE 861 EWS-14/2024-25

Amount

M&L for excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation Hard/ dense soil of poles/stay/cable etc including getting out in any type of soil complete all as specified an directed.

M&L for excavation in trenches beyond 1.5 m wide and n.exc. 3 m deep for foundation hard/dense soil of poles/stay etc including getting out in any type of soil complete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeking 25 cm in hard and dence soil complete all as specified and directed.

M&L for removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

M&L for sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed.

M&L for sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified

M&L for of Pin type insulator porcelain, vitreous, white/ brown or green insulators including one galvanised MS spindle, two galvanized iron washer, GI nut of size 100 mm height and 65mm dia 1100 volts grade complete all as specified

S&F in repair of Shackle type insulators, porcelain, vetreous white/ brown or green including galvanised MS strips, bolt,nuts and washer of size 75mm height and 90mm dia,size of strap section 31x3mm and dia of 12 mm for working pressure 1100 volts grade complete all as specified and directed.

M&L for in repair of Continues earth wire/guard cradle hexagonal/rectangular fabricated with 4mm dia galvanized mild steel, binding wire complete all as specified and directed.

Supply & fix in replacement Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screw as specified type 410 SP -31 (9.00 meters long) including two coat of red oxide and applying two coat of aluminium pain with white washing including coping, including PCC foundation/ pole coping etc as specified complete all as specified and directed.

M&L for stay assembly complete with accessories as shown in electric plate No. 1 and including loop type insulator white brown or green with over all dimensions 65x90mm, clearance of hole 16mm complete including dismantling stay assembly complete all as specified and directed.

M&L for cross arms, bracings, supports, clamps and back plate fabricated from structural steel section including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shapes size as indicated or directed and inclusive of one primer coat, and one under coat and one finished coat of aluminium paint complete including dismantling cross arms of MS channel complete all as specified and directed.

M&L for restretching only the ACSR conductor fixed on over head line pole and tightening the ACSR, taking down the conductor from insulators complete with auth sag and rewinding with insulators in proper position after tighting with new aluminium winding wire of dia 2mm complete all as specified and directed.

Supply and laying GI tubing 40mm dia light grade with all fitting laid in trenchs or fixed on wall along pole including fixing arrangement nut bolts clamp etc complete for protection of electric cable/strip complete all as specified and directed.

M&L for in repair of single painted air termination rod aluminium rod 12 mm dia and 300 mm long all as specified and directed.

Supply and fixing in repair of aluminium strip 25mmx3.15 mm with saddles and fixing screws for roof conductor/down conductors, insulators etc all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron strip 25×4mm means of bolts, nuts check nut & washers of galvanised iron or steel & connected to main switch including complete excavation and earth work in soft/loose soil and disposal of surplus soil to a distance not exc 50 meters, PCC Chamber (1:3:6) type C-2 precast RCC cover with frame, funnel wire mesh, 20mm bore light grade galvanised iron or steel pipe for water, charcoal or coke and salt in alternative layers of 15cm compacted thickness all round the earth electrode complete alll as shown in electrical plate No 3 of SSR part-I including welding with suitble electrode and testing complete all as specified an directed. (i) Main earthing strip from earth plate electrodeto test point upto length of 7.5 mtrs length shall deem to be included in the unit rate quoted against this item. (ii) M&L Tubing GI med grade 40mm dia for protection of earthing strip and passing the Road/passes and etc.shall deem to be included in the unit rate quoted against this item. (iii) On testing after completion if the desired resistenance is not obtained the contrator shall redo the earthing without any extra cost to the department .

M&L for earthing complete with galvanised steel pipe electrode 40mm bore medium grade 2.5 mtrs length, buried directly and preferably vertically in ground with top edge not less than 1.25 mtrs below the ground level connected with earthing lead of 4mm dia GI or steel wire all as shown in plate No 2 to the earthing test point & connected to main switch including complete excavation and earth work in soft/loose soil and disposal of surplus soil to a distance not exc 50 meters, PCC Chamber (1:3:6) type C-2 precast RCC cover with frame, funnel wire mesh,all as specified and indicated including testing on completion.

M&L for boring of holes under roads, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure & making good the same to match the existing surface complete all as directed by Engr in charge.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 25 sqmm 3.5 core. laid in trench/ duct / along pole/wall/ road crossing etc including making connection complete all as specified an directed. Note : The cost of thimbles/lugs and cable gland and LT insulation tape for insulation etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 35 sqmm 3.5 core. laid in trench/ duct / along pole/wall/ road crossing etc including making connection complete all as specified an directed. Note : The cost of thimbles/lugs and cable gland and LT insulation tape for insulation etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 50 sqmm 3.5 core. laid in trench/ duct / along pole/wall/ road crossing etc including making connection complete all as specified an directed. Note : The cost of thimbles/lugs and cable gland and LT insulation tape for insulation etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 70 sqmm 3.5 core. laid in trench/ duct / along pole/wall/ road crossing etc including making connection complete all as specified an directed. Note : The cost of thimbles/lugs and cable gland and LT insulation tape for insulation etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 95 sqmm 3.5 core. laid in trench/ duct / along pole/wall/ road crossing etc including making connection complete all as specified an directed. Note : The cost of thimbles/lugs and cable gland and LT insulation tape for insulation etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 120 sqmm 3.5 core. laid in trench/ duct / along pole/wall/ road crossing etc including making connection complete all as specified an directed. Note : The cost of thimbles/lugs and cable gland and LT insulation tape for insulation etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 300 sqmm 3.5core. laid in trench/ duct / along pole/wall/ road crossing etc including making connection complete all as specified an directed. Note : The cost of thimbles/lugs and cable gland and LT insulation tape for insulation etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 16sqmm 4core. laid in trench/ duct / along pole/wall/ road crossing etc including making connection complete all as specified an directed. Note : The cost of thimbles/lugs and cable gland and LT insulation tape for insulation etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Aluminium conductor of size 10sqmm 2 core. laid in trench/ duct / along pole/wall/ road crossing etc including making connection complete all as specified an directed. Note : The cost of thimbles/lugs and cable gland and LT insulation tape for insulation etc is incl in quoted rate and no extra payment will be made for it.

Supplying and fixing in repair of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat of size 10.0 sqmm for service connection complete all as specified an directed.

Supplying and fixing in repair of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat of size 16sqmm for service connection complete all as specified an directed.

Taking out from trenches/poles/wall etc LT UG Cable PVC insulated sheathed with multistranded aluminium conductor armoured and relaying after fault rectification duly tested in trenches/Poles/Wall of LT UG Cable of any sizes including Earth work complete all as specified an directed.

Supply and replacement in repair of danger notice board 1.6mm thick M.S sheet, vitreous enamelled white with letters, figures and conventional skull and bone in signal red colour and fixed with M.S clamps, bolts and nuts of approved size for LT 20x15cm size.by replacing the unserviceble one complete all as specified an directed.

Supply in replacement of voltmeter 0-500 volts digital type including taking down old existing unsv complete all as specified an directed.

Supply in replacement of Ammeter 0-400Amps digital type including taking down old existing unsv complete all as specified an directed.

Supply in replacement of indication lamp (RYB) including taking down old existing unsv complete all as specified an directed.

Supply and fixing in repair 2.5 Sq mm two core PVC insulated flexibale copper conductor wire for street/security light connection complete all as specified and directed.

S&F LED bldg security/Street light 60W indus series powder coated pressure die cast alluminium high power LED bldg security light with heat resistant toughned glass with lens complete all as specified an directed.

Supply and fix in replacement of LED flood lights 50 W energy saving and enviromental friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories complete all as specified an directed.

S&F in replacement to existing any type fitting by LED street light 45 watt energy saving and environment friendly light fitting with electronic gear housed in pressure dia post aluminium housing LED street light luminaires with IP66 Protection including all accessories complete all as specified an directed.

S&F rigid non-metallic PVC conduit of size 20 mm diaincluding all fixing accessories for pole/ wall , couplers, lock nuts, saddles, pipe hooks etc complete all as specified an directed.

M&L in repair of MCCB four pole, 415 volts adjustable type, 160 Amps with breaking capacity 35/36 KA complete all as specified an directed.

M&L in repair of MCCB four pole, 415 volts adjustable type, 200 Amps with breaking capacity 35/36 KA complete all as specified an directed.

M&L in repair of MCCB four pole, 415 volts adjustable type, 250 Amps with breaking capacity 35/36 KA complete all as specified an directed.

M&L on repair of MCCB four pole, 415 volts adjustable type, 350 Amps with breaking capacity 35/36 KA complete all as specified an directed.

M&L in repair of MCCB four pole, 415 volts adjustable type, 400 Amps with breaking capacity 36 KA complete all as specified an directed.

M&L in repair of MCCB four pole, 415 volts adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified an directed.

M&L in repair of MCCB four pole, 415 volts adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified an directed.

S&F in repair of changeover switch off load type 415 volts tripal pole neutral in sheet metal enclosure four pole of capacity 100 Amps complete all as specified an directed.

S&F in repair of changeover switch off load type, 415 volts tripal pole neutral in sheet metal enclosurefour pole of capacity 63 Amps complete all as specified an directed.

S&F in repair of changeover switch off load type 415 volts tripal pole neutral in sheet metal enclosure four pole of capacity 200 Amps complete all as specified an directed.

S&F in repair of changeover switch off load type 230 volts Single Pole in sheet metal enclosure of capacity 32 Amps complete all as specified an directed.

Supply, fabrication, installation, testing & commissioning of LT Panel board / Feeder piller box,outdoor type, dust and vermin proof, made out of 3.15mm thick CRCA sheet, front & back openable doors having aluminium bus bar of capacity 200 amps for phases and 100 amps for neutral including powder coated painting, internal wiring with suitable size of stranded copper conductor cable, including taking down old panel complete mounted on PCC foundation, supporting channel,and outgoing with thimble/lugs, including the accessories as below complete and mountig the panel on ground/floor with PCC(1:3:6) bedding upto a height of 30 cm above ground level and 30 cm in foundation complete all as specified and directeddirected.cable termination, cable gland etc, complete (Feeder Panel) including taking out old unsv panel, complete all as specified and comprising of the followings: Note : The cost of thimbles/lugs and cable gland,Pcc for panel base etc is incl in quoted rate for connection for cable and no extra payment will be made for it. (a) MCCB 100 Amps 4pole,36 KA,Thermal magnetic - 1 No (Incomer) (b) MCCB,four pole 63 Amps,18KA,Thermal magnetic - 01 No (Out going) (c) MCB, SPN 32 Amps,18KA,Thermal magnetic - 03 No (Out going) (d) Volt meter , digital type ,0 - 500V - 1 No (e) Ammeter, digital type with CT's - 1 No (f) indication lamps (R,Y,B) LED type - 1 set

M/S AK ENTERPRISES

M/S HAMIDULLAH KHUROO

Kesar Impex

FIRDOUS AHMAD BABA

M/S Manzoor and Co