Development of Heritage Park, Parade Ground, Opposite Lal Quila, Chandni Chowk, Delhi

Amount

P/F Stone Work (Machine cut edges) for wall & floor backing filled of required size as per image attached, with a grout of 12mm thick cement mortor 1:3 (1 white : 2 stone dust ) with an admixture of pigment matching stone shade blue stone cobbles 100mm thick and as per direction of Engineer in chagre

P/F Gwalior stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, as per direction of Engineer in charge with base of cement mortar 1:4 (1 Cement : 4 coarse sand ) 20mm thick

P/F Cemento Grey flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, as per direction of Engineer in charge with base of cement mortar 1:4 (1 Cement : 4 coarse sand ) 18 mm thick

Providing and fixing MS Grill and MS gate in required pattern as per image enclosed, all complete as per direction of Engineer in Charge.

Providing Champhering of Edges of Existing Sand Stone 5mm by 5mm in required pattern as per image enclosed i/c rubbing and polishing to match the shade of the stone, all complete as per direction of Engineer in charge

Providing and fixing stone work as per images enclosed in cement mortar 1:3 ( 1 Cement : 3 coarse sand ) including pointing in white cement mortar 1:2 ( 1 White cement : 2 Stone Dust) with an admixture of pigment matching the stone shade, block without any chamfers etc. complete as per direction of Engineer in Charge

Providing and fixing stone work as per images enclosed in cement mortar 1:3 ( 1 Cement : 3 coarse sand ) including pointing in white cement mortar 1:2 ( 1 White cement : 2 Stone Dust) with an admixture of pigment matching the stone shade, block without any chamfers etc. complete as per direction of Engineer in Charge : Red Sand Stone

Providing and fixing White Vitreous urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & amp; 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufactures specification MODEL NO URS-WHT-13255 all complete and as per direction of Engineer-In-Charge.

Providing and fixing Wash basin with C.I Brackets, including painting of fittings and brackets, cutting and making good the walls wherever require: Wash basin size 580 x 405 x 185 mm MODEL NO FNS-WHT-40601 all complete and as per direction of Engineer-In-Charge.

Providing and fixing White vitreous china extended wall mounting water closet of size, approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre / 6 litre, including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. Model No. FNS-WHT- 4095 1UF all complete and as per direction of Engineer-In-Charge.

Providing and fixing Basin Mixture Model No.qqt-chr-7189. all complete and as per direction of Engineer-in-charge

Providing and fixing Paper holder with Flap Model No. AQN CHR 7753. all complete and as per direction of Engineer-in-charge.

Providing and fixing Soap dispenser with Metallic bottle Model No. ACN CHR 1137N. all complete and as per direction of Engineer-in-charge.

Providing and fixing Paper Towel dispenser, Towels Model No. PTD-SAP- DT0106CS. all complete and as per direction of Engineer-in-charge.

Providing and fixing Optima Hand Dryer, Satin Model No. HDR-SAP-M 99 ACS. all complete and as per direction of Engineer-in-charge.

Applying two coats of sealer on the Existing Sand Stone Walls & Floor @ 0.20 litre per sqm of compound concentrated 1:9 as to making the stone with in the permissible water absorption as per IS code, Complete as per direction of Engineer- in-Charge.

Providing and fixing Toughened glass 12mm in required pattern as per image enclosed, all complete and as per direction of Engineer-in-charge.

Providing and fixing Toughened glass 12mm in aluminium frame in required pattern as per image enclosed, all complete and as per direction of Engineer-in-charge.

Extra for pdg. designing work in floor in required pattern as per image enclosed, all complete as per direction of Engineer-in-charge. Note- Cost of Pdg. and Fixing stone is to be paid for separately.

Description of Work / Item(s)

Part 'A' Civil Work Percentage Rate

Part 'B' Civil Work Market Rate

M/s AKJ Developers

AKSHIT BUILDERS

M/s AKJ Developers