8795/E8 REPAIR TO CHAJJAS, RCC MEMBERS, PLINTH PROTECTION, SUNKEN FLOORS, FLOORING, ANTI-TERMITE TREATMENT, JOINERY AND PLUMBING WORKS OF OTM ACCN AND MD ACCN AT NAD SUNABEDA, ODISHA

Amount

Taking down cement plaster on brick or concrete or stone wall surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed by Engineer-in-charge

M&L for 15mm thick rendering in two layer on fair faces of brick masonry or concrete surfaces of walls consisting of 1st layer of 10mm thick plaster in CM (1:6) and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM (1:4) mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished fair & even, complete, all as specified. Note : - Supply only water proofing compound shall be measured and paid for separately.

M&L for rendering 10mm thick in cement mortar (1:6) on internal faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, complete all as specified & directed.

M&L for rendering 5mm thick in cement mortar (1:3) on ceiling of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement, complete all as specified & directed.

M&L for preparation of new undecorated plastered/concrete surfaces of walls by rubbing down and applying two coat of weather shield ultra exterior premium emulsion paint over and including one coat of weather coat primer, complete, all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Material and labour preparation of newly plastered surfaces of ceilings & applying three coats of white wash complete all as specified.

Material and labour 75 mm thick PCC (1:3:6) type C1 using 20 mm graded stone aggregate as in path, plinth protection, surface finished fair and even complete all as specified.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

M&L screed bed or bedding layer of cement mortar (1:6), 15mm thick for laying floor finishes etc complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 10mm thick in cement plaster (1:4) on surface of brick masonry or concrete surfaces for fixing tiles/stone slab etc, finished fair & even complete all as specified.

M&L for Non skid Ceramic coloured /printed 7 to 8 mm thick (square rectangular) area of each the exceeding 0.06 Sqm but not exc 0.11 Sq m laid as in floors, setting and jointed with cement slurry over and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed by Engineer-in-charge .

M&L for Glazed ceramic tiles coloured /printed tiles of size 450mmx350mm / 350mmx250mm x 6 to 7 mm thick setting & jointed with neat cement slurry as in dado, skirting etc and pointed with coloured cement to match with surface of tiles complete all as specified and as directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over complete all as specified & directed.

M&L for 18 to 20mm thick Granite (of any type) slab of approved shade as in flooring, platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) complete, all as specified & directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n exc 1.50Km complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar (1:4) on internal surface of brick work or concrete surfaces of walls, finished the surface even & smooth without using extra cement, complete, all as specified and directed by Engineer-In-Charge.

M&L for Applying evenly tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm in patches including cleaning surface complete, all as specified and directed by Engineer-In-Charge.

M&L for APP based polymeric membrane in patches minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/Sqm) on primed surface by forced application complete all as specified and directed.

M & L for PCC (1:5:10) type E-2, using 40mm graded stone aggregate as in sunken floor, surface finished fair & smooth complete all as specified and as directed by Engineer-in-Charge.

M & L for 30mm thick PCC (1:2:4) type B-0, using 12.5mm graded stone aggregate mixed with WPC as per manufacturer instructions as in sunken floor, surface finished even & fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note: WPC shall be measured and paid seperately

Supply only integral water proofing compound (ISI marked).

M & L for High density polyethylene pipes (HDPE) of pressure of size 40mm bore, rating 6 kgf/cm2 laid in trenches complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.

Supply and fixing PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle including brackets as in repair complete all as specified

S&F in repairs 15 mm bore bib tap, cast copper alloy, fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.

S&F in repairs 15mm bore stop valve, chromium plated (concealed) cast copper alloy, screwed down, high pressure with crutch or butterfly handle with long shank and cup for iron pipe or for unions complete all as specified and directed by Engineer-in-charge.

Supply and fixing PVC connection 450 mm long suitable for 15 mm bore GI pipe including brass check nuts and union etc as in repairs complete all as specified.

S&F pillar taps, cast copper alloy with capstan heads chromium plated, screwed down high pressure, with or without lettered “Hot” or “Cold” with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe and fixed as in repair complete all as specified and directed by Engineer-in-charge.

S & F 500 liters rotational moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as directed by Engineer- in -charge. Make :- Sintex/Polywell/Polycon

S&F vitreous china wash hand basin white flat back of size 630 mm x 450 mm including a pair of cast ironcantilever brackets of size 40x40x5mm embedded in PCC (1:3:6) type C-1 with & including 32 mm dia PVC waste pipe and 32mm chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed as in repairs complete all as specified.

Supply and fixing in repairs 32mm Waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

M&L for cement concrete (1:1.5:3) (Nominal Mix), type B1 using 20mm graded crushed stone aggregate in edges/patches Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, including neccessary formwork & demolition and removing of existing reinforced cement concrete complete, all as specified and directed by Engineer-in-charge.

M&L for cement concrete (1:2:4) (Nominal Mix), type B1 using 20mm graded crushed stone aggregate as in edges/patches chajjas and the like, including neccessary formwork & demolition and removing of existing reinforced cement concrete complete, all as specified and directed by Engineer-in-charge.

M&L Applying eventy a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per Sqm including cleaning of roof surface and applying one coat of aluminium bituminous paint all as specified and directed by Engr-in-Charge.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors as in repairs complete all as specified.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors as in repairs complete all as specified.

S&F in repair 75mm bore PVC(SWR) junction double (double T) equal or unequal with access door complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 110mm bore PVC(SWR) junction double (double T) equal or unequal with access door complete all as specified and as directed by Engineer-in-Charge.

S&F for 75mm bore PVC(SWR) bends any radius as in repair complete all as specified and as directed by Engineer-in-Charge.

S&F for 110mm bore PVC(SWR) bends any radius as in repair complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 75 mm bore PVC (SWR) vent cowl as in repair complete all as specified.

Supply and fixing 110 mm bore PVC (SWR) vent cowl as in repair complete all as specified.

S & F 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as directed by Engineer- in -charge. Make :- Sintex/Polywell/Polycon

M & L in repairs for water proofing treatment to roof with polymetric water proofing membrane of weight not less than 3 Kg/sqm and minimum 3 mm thick including coating the surface with water base bituminous primer @0.5 litres/sqm and blown bitumen 85/25 grade @ 1.20 Kg/ Sqm at the bottom and another coat at top of the membraine in patches area not exc 5 sqm complete including taking down all as specified and directed by Engineer- In- Charge.

M&L Applying eventy a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per Sqm in patches including cleaning of roof surface and applying one coat of aluminium bituminous paint all as specified and directed by Engr-in-Charge.

Taking down to 15mm bore steel tubing and connection including cleaning for re-fixing or remove from site complete all as directed by Engineer-in-Charge

All as per serial item above but 20mm bore

All as per serial item above but 25mm bore

Refixing old steel tubing and connection in new or old position (wall, ceiling, floor etc) of 15mm bore of pipe complete all as specified and directed

All as per serial item above but 20mm bore

All as per serial item above but 25mm bore

S & F for 15mm bore steel water tubing medium grade, galvanised with all fittings and fixture fixed & concealed in wall/ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

All as per serial item above but 20mm bore

All as per serial item above but 25mm bore

SMART ENERGY SOLUTIONS

M/s Jai Sree Hari