SPECIAL REPAIRS TO BLDG NO. T-12 (QTRS NO 12/1 TO 12/6) AT CRLC LINE IN RA AT CAD PULGAON

Amount

B/R Works:- Demolition of plain cement concrete in ground floor & paving not exc 15 cm thick above or below ground level and removing salvage to a distance not exc 50 m, complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles, including all quions, arches, pillars etc and removing unserviceable material exc 100 m, complete all as specified and as directed

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed

M&L for brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6, complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM 1:6 on fair faces of brick masonry or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls including raking out joints hacking for key, scrubbing down with water and removing unsv material outside the premises etc., complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM 1:6 on internal fair faces of stone masonry surfaces, including dubbing out any thickness in CM 1:6 (if required) and finished even & smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM 1:4 on fair faces of stone masonry surfaces, including dubbing out any thickness in CM 1:4 (if required) and finished even & smooth without using extra cement, incl all necessary scaffolding and lifting arrangement for three storey bldg on external surface, complete all as specified and as directed.

Taking down Chowkats or frames including shutters (without taking of shutter from the frames) n. exc 1.50 Sqm each complete all as specified and as directed.

Taking down Chowkats or frames including shutters (without taking of shutter from the frames) exc 1.50 Sqm and not exc 4 Sqm complete all as specified and as directed.

Taking down shutters exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified and as directed.

Refixing of shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified and as directed.

Supply & fix 35 mm thick, II class hard wood, plain framed factory made panelled shutter (two panel) with lock rail & panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated, complete all as specified and directed.

Supply & fix 35 mm thick 2nd class HW factory made glazed and Skelton door shutters open rebated without sash bar and prepared to receive wire gauge edges cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part I section and clause 8.20 (a) fitted to Chowkats or frames of any numbers of panels, complete all as specified and as directed.

Supply and fix pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and as directed by Engr-in-Charge.

Supply and fix pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1 : 3 : 6 Type C-0 (using 12.5 mm graded stone aggregate), as in filling in pressed steel chowkhat, fixing of hold fast etc., complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing all as specified and as directed.

Supply & fix factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles), with 2mm thick moulded PVC sheet on front face and 2mm thick plain colour PVC sheet on back face, with wood free EPS, supplying & fixing in the frame at site as per specification & drawing as given in SSR part-II, complete all as specified and directed.

Supply & fix factory made (Z type sections) Steel windows with side hung shutters including projection type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, with guard bar, complete all as specified and directed.

Same as item no. 21 above but without glazing bars.

Supply & fix 100 mm long Mild steel medium weight cold rolled butt hinges and fixed with screw / welded to frames etc complete all as specified and as directed.

Supply & fix 150 mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and as directed.

Supply & fix 300 mm long aluminium alloy, anodised, sliding bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and as directed.

Supply & fix 150 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and as directed.

Supply & fix mild steel 150 mm ordinary rat tail rod pattern springs, including roller and roller plate, complete all as specified and as directed.

Supply & fix Stainless steel wire cloth, 0.36mm nominal die of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F sheet glass ordinary quality, 3 mm thick and glazing with oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and as directed.

M&L for block board, 18/19 mm thick, grade 2 quality with decorative face both side, interior grade, commercial type, fixed with screws to timber frame work for cupboard shutter, shelf etc., fixed in repairs, complete all as specified and as directed.

M&L for 100mm thick PCC 1 : 4 : 8 Type D-2 (using 40 mm graded stone aggregate), as in sub base of floorings, complete all as specified and as directed.

M&L for 75 mm thick cement concrete M-10 Nominal mix using 40 mm graded stone aggregate as in plinth protection/ path laid to slope 1:12, finished surface even and fair without using extra cement with and incl all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight), complete all as specified and directed.

M&L for Edge cut/joint free colour ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc., laid over and including 15 mm thick screed bed or bedding layer in CM 1:6 laid and set & jointed in neat cement slurry and pointed in coloured cement to match over, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300mm x 450mmX 7mm thick as on vertical surface such as skirting / dado and rises to steps, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

Material & labour for 20 mm thick Granite of any type) work (table rubbed and polished) in steps, jambs, pillars, window- sills, cooking platforms and like in CM (1:4) incl pointing in white cement (1:2) using marble dust, with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:6, complete all as specified and as directed.

M&L for 40mm thick PCC 1 : 2 : 4 Type B-1 (using 20 mm graded stone aggregate), as in floorings and similar works, laid in alternate panels and finishing surfaces even & smooth with using extra cement, complete all as specified and as directed.

M&L for glass dividing strip, 3mm thick 38 mm wide laid in position, complete all as specified and directed.

S & F flat iron bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required, hooks (stay) for large gates, hook & pintle hinges, large hasp & staples, hand made sliding bolts, clamps, hold fast and similar works conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

S & F Chimney bars (straight or camber) bearing bars, ton-gues of water bars for window frames, window guard bars, plain let in and fixed independently in wooden frames, L/T section supports for shelves etc., and similar articles confirming to Fe290 Gde E-165, complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and as directed.

S & F mild steel square/rectangular hallow sections in structural steel confirming to IS 1161-1979, Fe-290, Gde E-165 as in trusses, purlins, crane gantries, rails and fastenings, heavy brackets framing including distance pieces, cleats etc., complete all as specified and as directed.

Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of wall and ceiling board (fibre, insulation etc) or insulation board, slabs, blankets, any thickness including cover fillets complete all as specified and as directed.

Supply & fix 9mm thick designer ceiling board (Make: Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24 mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & of size T 24X32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2 m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall be not greater than 450 mm from adjacent wall flush fitting of 1200 mm long cross tee with (double stitching) to be inter locked between main runners at 600 mm c/c to form 600 X 600 mm modules, angle along perimeter wall shall be of 0.45 mm thick galvanized steel of size 19 X 19 mm of white colour all as per instruction complete all as specified and as directed. directed.

M&L for preparation of old treated surfaces of walls and applying three coat of white wash including filling cracks and holes etc., complete all as specified and directed

M&L for preparation of new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 3 mm Birla white care putty etc., complete all as specified and as directed.

M&L for preparation of surfaces of walls & applying two coats of cement base paint over a coat of alkali resistant priming paint as primer of approved make complete all as specified and as directed.

Material & labour for preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint, complete all as specified and as directed.

Material & labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth & applying one coats of synthetic enamel paint, complete all as specified and as directed.

Material & labour for preparation of old painted surfaces of steel over 10 cm width or girth & applying one coats of synthetic enamel paint, complete all as specified and as directed.

Material & labour for preparation of new or previously untreated surfaces of steel or iron works of any description over 10 cm width or girth & applying two coats of synthetic enamel paint, complete all as specified and as directed.

Taking up or down steel tubing 15mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing 20mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Supply & fix GI tubing 15 mm bore medium grade including all fittings such as bends, elbows, tees, union etc., and fixed to wall/ceiling or laid in floors complete all as specified and as directed.

Supply & fix GI tubing 20 mm bore medium grade including all fittings such as bends, elbows, tees, union etc., and fixed to wall/ceiling or laid in floors complete all as specified and as directed.

Fixing only GI tubing 15 mm bore, of any grade, including all new fittings such as bends, elbows, tees, union etc., and fixed to wall/ceiling or laid in floors complete all as specified and as directed.

Fixing only GI tubing 15 mm bore, of any grade, including all new fittings such as bends, elbows, tees, union etc., and fixed to wall/ceiling or laid in floors complete all as specified and as directed.

Supply and fix PVC valve less symphonic action type flushing cistern 10ltr capacity low level, white / coloured with inlet ball valve float and handle including bracket and PVC flush pipe 32 mm dia and PVC connection pipes, as in repairs, complete all as specified and as directed.

Supply and fix PVC connection 15 mm dia, 600 mm long including brass ferrules on both ends, as in repairs, complete all as specified and as directed.

Supply & fix Vitreous china wash basin, white, flat back, size 580 x 450mm including cutting for and pinning in ends of brackets and waste pipe and fixing of pillar tap, PVC connection waste pipe, coupling etc., as in repairs, complete all as specified and as directed.

Supply & fix in repairs vitreous china squatting pan 'Orissa pattern 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flushing pipe but including fixing of flushing cistern, flush pipe, PVC connection etc complete) complete all as specified and as directed.

Supply & fix 15mm bore Bib tap, cast copper alloy chromium plated, fancy type, with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed, as in repairs, completed all as specified and as directed.

Supply & fix 15mm bore Stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipes or for Unions and fixed, as in repairs, complete all as specified and as directed.

Supply & fix 15mm bore Stop valve, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed, as in repairs, complete all as specified and as directed.

Supply & fix Pillar tap swan neck 15 mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with screwed shanks and fly nuts, screwed for iron pipe and fixed, as in repairs, complete all as specified and as directed.

Supply and fix PVC waste fittings 40mm brass, chromium plated with long screwed shank and fly nuts for sink, basin etc., complete all as specified and as directed.

Supply & fix Brass chromium plated Shower rose with or without swivel joints of 250mm size including fixing to 15mm bore GI pipe or union, as in repairs, complete all as specified and as directed.

S&F Soap dish holder fixed to walls with chromium plated brass screws, Complete all as specified and as directed.

Supply & fix brass chromium plated Harrison rail 20mm dia, including brackets , stops, rollers etc., as in repairs, complete all as specified and as directed.

Supply & fix brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long between flanges, including brackets, as in repairs, complete all as specified and as directed.

Supply & fix stainless steel grating of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including, as in repairs, complete all as specified as directed.

S&F PVC (SWR) floor trap 75mm dia, setting and jointing with solvent cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore "S" or "P" trap, complete all as specified and as directed. Make: Supreme/ Finolex

S&F PVC (SWR) 110mm bore pipe single socketed incl bend, tee etc., in any length with rubber joint fixed to walls in any height with all necessary fittings etc., complete all as specified and as directed.

S&F PVC (SWR) 75mm bore pipe single socketed incl bend, tee etc., in any length with rubber joint fixed to walls in any height with all necessary fittings etc., complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore vent cowl, complete all as specified and as directed.

Supply & fix stainless steel sink 1.00 mm thick for kitchen or laboratory with plugs, washer and PVC waste pipe 40mm dia including bedding in cement mortar on to dwarf wall or including fixing cantilever cast iron brackets and connecting union to waste pipe overall all size 915mm x 460mm bowl size 410mm x 330mm x 160mm, as in repairs, complete all as specified as directed.

Supply & fix stainless steel kitchen plate rack of size 900 X 750 X 220 mm, minimum thickness of steel sheet 0.63 mm, including necessary drilling, fixing with screw, plugs in kitchen etc., as in repairs, complete all as specified and as directed.

Dismantling carefully of existing water tank of capacity exc. 250 ltr and n.exc 500 ltr in any position, complete all as specified and as directed.

S&F rotational moulded polyethylene triple layered water storage tanks (cylindrical or vertical with closed top) 500 liter capacity hoisted and fixed in position, all as specified in SSR Part-I, complete all as specified and as directed.

S&F 20mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed , complete all as specified and as directed.

E/M Works:- Taking down unserviceable point wiring with copper/aluminium conductor cable of (light, fan, plug and power plug point) complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fittings, regulator etc, and making good disturbed surfaces of walls/floor etc to match with existing surfaces including white/ colour washing/distempering all as specified and as directed.

Taking down old unserviceable MCB with sheet metal enclosure with double door flush mounting, 8 way, 240 volt factory fitted rated bus bars, main switch ,DB etc and making good the disturbed surfaces of wall all as specified and as directed.

Taking down carefully unserviceable sub main wiring of any size/capacity and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

Material and labour for concealed point wiring 1100 volt grade single core PVC FRLSH insulated and unsheathed cable with multi-stranded copper conductor 1.50 Sqmm drawn in with and including electrical grade PVC conduit not less than 20 mm dia with IS 9537 (Part-III) 1983 marking, medium grade concealed on wall/ceiling as per site requirement including PVC FRLSH insulated and unsheathed cable with copper conductor of size 1.50 Sqmm as earth conductor and pressed steel terminal boxes sunk on wall for mounting switches, switch sockets. fan regulator, etc including laminated sheet cover 3mm thick including making good the disturbed surfaces complete all as specified and as directed for:- (a) One light point controlled by one No. one way switch.

(b) One fan point controlled by one No. one way switch and regulator.

(c) One 3 pin 5/6 Amps socket out let point on the same board with other switches .

(d) One 3 pin 5 Amps socket out let point on independent board.

All as per item No. 92 here in before, but wiring with 2.50 sqmm multi stranded copper conductor cable and earth wire with copper conductor cable of size 1.5 Sqmm for 15 Amps power plug point.

M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor and earth wire 1100 Volt grade of size 2 x 6.0 sqmm + 1 x 6.0 sqmm earth wire and drawing into PVC conduit heavy duty of suitable size concealed in wall, complete all as specified and directed. Note: 1. For sub main wiring: 2 runs of wire and 1 run of earth wire will be measured as one unit i.e. 1 RM 2. Groove cutting, pinning and plastering of disturbed surface etc shall deemed to be included in the quoted rate.

Supply & fix switch piano flush button single pole one way 5 Amps all as specified and as directed.

Supply & fix socket out let flush type 5/6 pin, 5 Amps, 250 volts, AC, multipurpose all as specified and as directed.

Supply & fix switch socket combination flush type 5/6 pin, 5 Amps, 240 volts, AC, multipurpose, complete all as specified and as directed.

Supply & fix switch socket combination flush type 15Amps, 5 in 1, 250 volts, AC, multipurpose, complete all as specified and as directed.

Supply & fix ceiling rose ,3 phase /PVC/polycarbonate, isolated body surface, all as specified and as directed.

Supply & fix lamp holder insulated body with back plate for angle/batten fittings, complete all as specified and as directed.

Supply & fix LED tube light 1 x 18/20 Watt retrofit incl suitable size of batten ,as in repairs, complete all as specified and directed.

Supply & fix stepped type electronic fan regulator AC 240 Volts, 50 Hz, complete all as specified and as directed.

Supply & fix MCB DB SPN 8 Way, 440 Volts, with factory fitted 200 Amp rated bus bar, earth bar, natural links, flush/surface mounting double door type, complete all as specified and as directed.

Supply & fix MCB DB TPN 4 Way, 440 Volts, with factory fitted 200 Amp rated bus bar, earth bar, natural links, flush/surface mounting double door type, complete all as specified and as directed.

Supply & fix MCB TPN 63 Amps,415V, 50Hz, complete all as specified and as directed.

Supply & fix MCB SPN 20 Amps, breaking capacity 10 KA, C series 240 Volts, complete all as specified and as directed.

Supply & fix MCB SP 6 to 32 Amps, 240 Volts,, breaking capacity 10 KA all as specified and as directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth lead wire 4.00mm dia by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40mm bore, medium grade 7.5m long as applicable and as per plate No. 3 of SSR Part-I 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover or reinforcement with 8mm TMT bars at 100mm c/c both ways with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 15mm nominal bore medium grade GI protection pipe upto 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm x 4 core, with and including taking down unserviceable UG cable of any size, complete all as specified and as directed. Note: excavation earth work will be measured and paid separately under respective items.

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and not exc 1.50m in depth and getting out in soft/loose soil all as specified and as directed.

Returning filling in, including spreading, leveling watering and well ramming in layers not exc 25 cms thick with soil all as specified and as directed.

Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and as directed.

Supply and lay, dry river sand filling in trenches to required width at bottom and top of cable as cable cushioning including spreading, levelling, watering and consolidation complete all as specified and directed. Note : Punned thickness only shall be measured and paid.

Supply and lay un-reinforced precast concrete cable cover, class LV, type 1, flat of size 250 X 150 X 40 mm for LT and laid dry in trenches over underground cables, complete all as specified and directed.

Supply & Fix GI Steel tubing "light grade" of 40mm bore with all accessories such as tee, union, socket etc., for cable protection passing under Road / Floor or for fixing to poles including taking out / old unserviceable pipe etc., complete all as specified and directed.

Taking down carefully existing serviceable ceiling fan with down rod complete of 1200/1400 sweep from fan hook, dismantling the blades, cleaning, servicing, painting with one coat of synthetic enamel paint, marking MES No. and refixing the same with twin core twisted flexible copper conductor cable of suitable size from fan to ceiling rose, complete all as specified and as directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 52,109.00/- ]

M/s Dara Constructions, Pulgaon

Ankit Construction

M/s Chandak Constructions, Pulgaon

Bidder Name

Ankit Construction

SHUBHAM SALES AND ENGG WORKS

M/s Chandak Constructions, Pulgaon

M/s Dara Constructions, Pulgaon