WBPHED/EE/MLMD/NIeT_08 of 2020-2021

Amount

Distn. wiring in 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish.

Avg Run 6mtr

Avg Run 1.5mtr

Distn. wiring in2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish (On Board)

Distn. wiring in 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish(Avg run 3 mtr)

Supplying & Fixing 4 Module GI Modular Switch Board with 2nos modular switch and 2 nos modular type socket of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works

S&F 415V 6 way Horizontal TPN MCBDB with double door SS enclosure(607716) with IP-42/43 protection having 1 no 63A 4 pole isolator and 18 nos ('C' Serise 10ka) 16-32A SPMCB concealed in wall after cutting the wall & mending good the damages to, original finish incl. ionterconnection with suitable copper wire and neutral link & provision for earthing attachment as per G.S.(Make-Legrand /Siemens/ABB

Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying and fixing double-door 2+8way SPN MCB(40Amp DP Isolator-1nos, 8nos SPMCB) Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

Suppy fixing of 4' LED tube light fitting connected with the conduit with suitable size of bolts and nuts incl. connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. Make - Philips (Cat no.- TMC501P 1 X T LED-22W P3242)

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Suplying & fixing MS fan clamp of two piece type for RC ceiling or steel joist as per approved specification fabricated from 40 mmx9 mm MS flat including making good damages to building roof with satisfactory finishing and painting-(As per Drawing no. 475 of PWD specification Book-May 1991) as to G.S.

S&F of 240V 48" sweep BEE 3 star rating(minimum) AC ceiling fan (make Crompton Greaves-cool Breeze or equivalent model of orient/Usha) as directed by EIC.

S&F 240V 300mm(12") dia 920 rpm of AC exhaust fan (EPCElectrical Pvt. Ltd. -Heavy Duty or equivalent of Orient/Usha) incl. cuting hole on wall S/F louver shutter aluminium with nuts bolts washers etc. on wall and mending good the damages to original finish as per direction of the EIC.

S&F of 240V 400 mm Snow Fall 16WA01 ( Snow White ) 3 star rating(minimum) wall fan (make orient/Crompton Greaves-cool Breeze or equivalent model of orient/Usha) as directed by EIC..

Suppy fixing Of 2ft LED tube light fitting connected with the conduit with suitable size of bolts and nuts incl. connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length

Supply Of Indoor Decorative LED Ceiling Mounting light fitting connected with the conduit with suitable size of bolts and nuts incl. connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. Make - Philips

Supply & Fixing only pendent light fitting complete with 9W LED lamp(M-Philips/Havells/Crompton Greaves), shade and 24/0.2 mm (1.5 sqmm) flexible copper wire incl. S&F pendent holder

Supplying and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (FINOLEX/KEI/RR KABLE) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

A)2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

B)2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

C)2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supply and delivery at site 230V, 50Hz, 1.5 Ton capacity , 5 star rating, wall mounted, CU tube oriented , split type Air Conditioning machine ( indoor unit + out door unit) with suitable remote control arrangement having digital display (make- Hitachi/Voltas/LG/Godrej/Other approved)

Installation of above supplied Ac machine at proper location of RWS ( lab room of ground floor ) including supply of required nos of iron frames, supplying and drawing of inter connecting pipe lines (copper) between indoor and out door units including testing for leakage and cooling performance to entire satisfaction of EIC after dismentling of the existing damaged A.C. machine.

Additional charges for pre-fabricated angles & mending works.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface](Avg Run5mtr)

Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. with S & F 6A 5 pin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] (On Board)

Suplying & fixing MS fan clamp of two piece type for RC ceiling or steel joist as per approved specification fabricated from 40 mmx9 mm MS flat including making good damages to building roof with satisfactory finishing and painting-(As per Drawing no. 475 of PWD specification Book-May 1991) as to G.S.

Suppy fixing of 4' LED tube light fitting connected with the conduit with suitable size of bolts and nuts incl. connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. Make - Philips (Cat no.- TMC501P 1 X T LED-22W P3242)

Suppy fixing Of 2ft LED tube light fitting connected with the conduit with suitable size of bolts and nuts incl. connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length

S&F of 240V 48" sweep BEE 3 star rating(minimum) AC ceiling fan (make Crompton Greaves-cool Breeze or equivalent model of orient/Usha) as directed by EIC.

S&F 250V electronic step type socket type fan regulator to be fixed on existing switch board(Anchor) incl. cutting top cover as per direction of EIC

S&F 240V 300mm(12") dia 920 rpm of AC exhaust fan (EPCElectrical Pvt. Ltd. -Heavy Duty or equivalent of Orient/Usha) incl. cuting hole on wall S/F louver shutter aluminium with nuts bolts washers etc. on wall and mending good the damages to original finish as per direction of the EIC.

Supplying and fixing double-door 2+8way SPN MCB(40Amp DP Isolator-1nos, 8nos SPMCB) Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

S&F 415V 6 way Horizontal TPN MCBDB with double door SS enclosure(607716) with IP-42/43 protection having 1 no 63A 4 pole isolator and 18 nos ('C' Serise 10ka) 16-32A SPMCB concealed in wall after cutting the wall & mending good the damages to, original finish incl. ionterconnection with suitable copper wire and neutral link & provision for earthing attachment as per G.S.(Make-Legrand /Siemens/ABB

Supply & Fixing 240 V, 2nos 20A, plug socket with separate2 nos 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Integrated LED Bulk head luminaire of pressure die cast housing, acrylic diffuser & frame with IP65 protection. (Make-CGL(LBH-10-CDL)/Philips (Endura WT202W LED6S NW PSU S2 PC)/ Similar type of approved make)

Supplying and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (FINOLEX/KEI/RR KABLE) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

A)2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

B)2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

C)2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

D) 2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

A)2.5 Sqmm

B)4 Sqmm

C)6 Sqmm

D) 10 Sqmm

Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode

Supply ,delivery, fitting fixing of nomenclature made from improted acrylic sheet letter of different sizes with different colours asper choice of EIC.The subect matter as directed by EIC shall be fixed on iron structure of size (10' x 6') and should be fitted on MS Angle (Size - 65 mm X 65 mm X 6 mm ) and ISMC 100 with epoxy coated including all necessary civil work after grountig the MS frame on the roof of the buildung and making necessary pillers, plasters, neat cement finissing etc to complete the work as per direction of EIC including supplying all required electrical materials. Colour type and colour letter & graphics will be as per direction of EIC.

Cost of labour charges for dismantling the exting E.I & mending good the damages including cleaning and disposal of all related rubbish and garbage from working site to suitable place of dumping outside of RWS Water Testing Lab Campus.

MAKE AS PER DEPARTMENTAL APPROVED VENDOR LIST CIRCULATED VIDE MEMO NO.PHE/IV/2277/W-181/19 DATED- 25/09/2019

Add GST @ 12%

Add Cess @ 1%

DAS CONSTRUCTION

GHOSH BROTHERS