Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA PIN 759103 | ANUGUL | ODISHA | 759103 | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹36.8 L+₹12.0 L (48.2%)Rejected-Finance | L2 | Rejected-Finance Other than lowest quoted tenderer |
Tender Value
Refer Docs
EMD Value
₹76,140
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Allahabad
HQ CWE New Cantt Allahabad
PROVISION OF APPROCH ROAD BEHIND KADUM KUNJ AT NEW CANTT UNDER GE (WEST) ALLAHABAD.
2023_MES_580579_1
81734/W/E8
Open Tender
Civil Works
Item Rate
180 days
Allahabad
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (West) Allahabad
₹76,140
Yes
29 Mar 2023
13 Feb 2023
22 Mar 2023
14 Feb 2023
20 Mar 2023
28 Feb 2023
Amount
M&L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Rolling and consolidating formation surfaces by Power Roller 8 to 12 Tonne in cutting complete all as specified and directed.
M&L for 150mm soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.
Rolling on soling of broken boulders or quarried stone, not exc 15cm thickness by Power Roller 8 to 12 Tonne complete all as specified and directed.
M&L for 150mm in two layers (75 mm + 75 mm) thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.
Rolling on water bound macadam (except laterite, kankar and broken brick aggregates) not exc 15cm thickness by Power Rpller 8 to 12 Tonne complete all as specified and directed.
M&L for preparing surfaces of water bound macadam by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and directed.
M&L for applying evenly a priming/tack coat with bituminous primer by paving bitumin at 10 kg per 10 sq metre complete all as specified and directed.
M&L for bituminous premix asphaltic dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed.
M&L for continuous brick edging; with width, equal to the width of the brick; laid dry on end vertically witth old size Brick complete all as specified and directed.
M&L for applying of 2.5mm thick thermo plastic (retro reflective) road marking paint for making with trafic lines, straight or curved having clear and sharp edges over road surfaces by using thermo plastic paint applicatro machine and necessary T & P including clarning of surfaces, heating the paings with termperature limits specified by the manufacturers , making peoper arrangement for traffic during operation etc. complete all as specified and directed.
S&F solar stud alumininum alloy solar powerd by monocrystal star panel (2.4 V/1600MA) LED 10 mm total 6 peice of 3 on each side view distance 1000 Mtr 12 Hour continious lighting at night and poly carbonate 6 LED FLAT BASE including required adhesive for fixing arrangements complete all as specified and directed. Make : TATA SOLAR BP or 3 M complete all as specified and directed.
S&F cat eyes ABS body with scratch and abrassion resistant, micro prismatic, polycarbonate and ultrasonically welded lenses, temperature resistance body of size 90x115x17mm fixed on road with bituminous adhesive as per manufactures instruction having resitance creamer coating and reflective surface complete all as specified and directed. Make-3M/Dark Eye/ Avery denison complete all as specified and directed.
Removing excavated material exc. 250m but n exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed
Excavating in trenches n.exc 1.5 m width and n. exc 1.5 m in depth for foundation etc or for shafts, wells,cesspits , manholes , pier holes etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.
M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and as directed.
M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in slabs supported on walls, roof beams etc and the like, complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressumers, lintal band at any height complete all as specified and as directed
Form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc rough finished complete all as specified and as directed
Form work to soffits of suspended slabs such as roof slab etc. n.exc. 200mm thick for fair finished surfaces of concrete complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed
S&F TMT bars of 10mm dia and over in reinforcement cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips and as straight in groves complete all as specified and directed.
M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface,finished even and fair complete all as specified and directed.
M&L for sand /crused stone dust filling under interloking paver block as in sand cussion bed including leveling complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking glossy paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and as directed.
M&L for removing excavated material exc. 250m but n exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
M&L for PCC Type B-1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs complete all as specified and directed.
M&L for demolation of RCC in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.
M&L for rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in including spreading, levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick complete all as specified and directed.
Demolition of brick work built in CM of any description includin all quions arches pillars etc complete all as specified and directed.
Demolition of plain cement concrete in ground floors and paving n exc 15 CM thickness (below or above ground level) complete all as specified and directed.
M&L for PCC Type B-2 1:2:4 (40 mm graded aggregate) , as in surface channel complete all as specified and as directed
M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed
M&L for 15mm thick rendering on fair faces of brick or concrete surcaces in cement mortar 1:4 incl even and smooth surfaces without using extra cement complete all as specified and as directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, tred/stopped ends etc. complete all as specified and as directed
S&F steel tubular electric pole, swaged type, welded (9 metre long) single swan neck type complete with CI base plate, bolts, nuts & screws all as specified including the following:- (a) Excavation in post hole not exceeding 1.5 Mtr wide & 2 Mtr deep for pole foundation & getting out in soft loose soil, returning, filling in the excavated soil after fixing the pole in foundation, ramming earth around in layers n.exc 25 cm thick and disposal of surplus soil to a distance n.exc 50 metres. (b) M&L for providing PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) in foundation 600mm x 600mm x 1500 mm (planting depth) for concrete encasing the pole upto GL (c) M&L for providing PCC 1:3:6, type C2 (using 20 mm graded stone aggregate) for plinth block /Collar above GL, 300 mm high and 450 mm dia (d) M&L for painting of pole externally with one coats of black bituminous paint (upto planting depth) and above plinth block/ concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surfaces including painting of 30 cm wide black bands 3 Nos with synthetic enamel paint in alternate layers upto the height of 1.5 Mtr above plinth block.
Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge.
Supply and fixing transparant KIOSK 200 mm x 150 mm x 100 mm made of 2 mm thick MS sheet including aluminium bus bar 100 amps, 02 Nos Clamp with nut. bolts fixed to LT poles complete all as specified and as directed. Make: Hansal/ HPL
M&L for three core 1.5 Sqmm copper conductor cable for connecting up street/ secuirity light with pole junction box complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and directed
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed
Removal of surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc.1.5 mtr above starting point complete all as specified and directed
Supply and laying sub class 'B' brick old size laid flat in trenches across the length for protection of cable as cable cover complete all as specified and directed .
M&L for sand cushioning in trenches for protection of under ground cable provided in layers of sand as 8 cm before laying the cable and 15 cm deep after laying cable complete all as specified and directed.
Supply and fixing Timer panel board double door type consisting one MCB 40 A TP as incomer and digital type time switch 3P module, DIN 24 hours programmable every 1 minutes with 28 memory location of current capacity 32 Amps with one change over including connecting to existing power contactor complete all as specified and directed . Make : Indoasian Cat Part No. TL0400B0 or equivalent in HPL/L&T
VIMAL KUMAR CONTRACTOR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .