Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAccepted-AOC 24A LAJPAT NAGAR NEAR BUS STAND YAMUNA NAGAR | YAMUNANAGAR | HARYANA | 133103 | L1 | Accepted-AOC Due to L1 Bidder | |
| 2 | L2₹30.0 L+₹14.1 L (88.8%)Rejected-AOC | L2 | Rejected-AOC Due to L2 Bidder | |
| 3 | Rejected-Technical | - | Rejected-Technical Rejected as per enclosed sheet |
| Sl No | Description | Qty | Unit | Khalsa Exports Private Limited L1 | MANOHAR LAL L2 |
|---|---|---|---|---|---|
| 1.01 | PULL DOWN CHALLENGER: - Supply and Fixing of Pull Down Challenger: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark- EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.88 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Pull down Bars 806 mm x 700 mm and Dia 40 mm are spaced at 630 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.
EQUIPMENT DIMENSIONS: 2.30 m x 0.70 m x 1.88 m
Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached.
Make:- HUGO Fitness / Kompan / Koochie | 3 | Each | 50,000 ₹1,50,000 Lowest | 63,500 ₹1,90,500 |
| 1.02 | SEATED CHEST PRESS: - Supply and Fixing of Seated Chest Press:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark- EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.88 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Bars of 1.02 m and Dia 40 mm while the handles are placed at a spacing of 698 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.
EQUIPMENT DIMENSIONS: 1.82 m x 0.69 m x 1.88 m
Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached.
Make:- HUGO Fitness / Kompan / Koochie | 3 | Each | 50,000 ₹1,50,000 Lowest | 76,000 ₹2,28,000 |
| 1.03 | SELF WEIGHTED ROWER: - Supply and Fixing of Self Weighted Rower: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark- EN 16630 certificates must be in the name of the supplier by hemselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Horizontal bars of length 1.26 m is to be schedule HOT DIP Galvanized steel with a 60mm O.D. and 2.2mm (wall) thickness of the tubing. Handle Bars of 0.74 m and Dia 38 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.
EQUIPMENT DIMENSIONS: 1.26 m x 0.80 m x 1.59 m
Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached.
Make:- HUGO Fitness / Kompan / Koochie | 3 | Each | 50,000 ₹1,50,000 Lowest | 81,000 ₹2,43,000 |
| 1.04 | RIDER : Supply and Fixing of Rider: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified international Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 0.5 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. A single seat of size 330 mm x 250 mm fixed to the top of the vertical post and two Pedals & Bars of size 145 mm x 50 mm and Dia 38 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 0.91 m x 0.65 m x 1.27 m.
Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached.
Make:- HUGO Fitness / Kompan / Koochie | 3 | Each | 45,000 ₹1,35,000 Lowest | 92,300 ₹2,76,900 |
| 1.05 | Tai Chi Spinners : Supply and Fixing of Tai Chi Spinners:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-
EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.15 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail of Dia 477 mm made with the pipe Dia of 32 mm fabricated from 32 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety 1 BIG SHOULDER WHEEL 55,537 55,537 TAI CHI SPINNER 57,206 57,206 limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.25 m x 1.09 m x 1.49 m.
Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached.
Make:- HUGO Fitness / Kompan / Koochie | 3 | Each | 40,000 ₹1,20,000 Lowest | 87,000 ₹2,61,000 |
| 1.06 | BIG SHOULDER WHEEL :- Providing, designing and fixing ofSupply and Fixng of Big Shoulder Wheel: " The product to match the colours, esign, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as PEMA, TUV, CPSC, or SGS only. The GS mark- EN 16630 ertificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.47 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail of Dia 0.69 m and Dia 42 mm fabricated from 42 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.
EQUIPMENT DIMENSIONS: 0.69 m x 0.61 m x 1.94 m
Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached.
Make:- HUGO Fitness / Kompan / Koochie | 3 | Each | 40,000 ₹1,20,000 Lowest | 78,000 ₹2,34,000 |
| 1.07 | HD HEALTH WALKER:- Supply and Fixing of Health Walker: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Foot Rest of size 361 mm x 161 mm are attached to the Standing Bars 957mm x 60 mm fabricated from 60 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings : Maintenancefree ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.18 m x 0.553 m x 1.25 m.
Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached.
Make:- HUGO Fitness / Kompan / Koochie | 3 | Each | 45,000 ₹1,35,000 | 35,000 ₹1,05,000 Lowest |
| 1.08 | HD SIT UP STATION: - Supply and Fixing of Sit Up Station: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 0.63 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two J shaped Bars of 1.07 m and Dia 48 mm. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.
EQUIPMENT DIMENSIONS: 1.48 m x 1.21 m x 0.63 m
Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached.
Make:- HUGO Fitness / Kompan / Koochie | 3 | Each | 40,000 ₹1,20,000 Lowest | 1,32,000 ₹3,96,000 |
| 1.09 | HD SQUAT PUSHING: - Supply and Fixing of Squat Pushing: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Vertical bars height of 1.70 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. L shaped bars of 960 mm x 600 mm carrying two seats of 0.34 m x 0.34 m fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.93 m x 0.56 m x 1.70 m
Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached.
Make:- HUGO Fitness / Kompan / Koochie | 3 | Each | 50,000 ₹1,50,000 Lowest | 73,500 ₹2,20,500 |
| 1.10 | HD WAIST TWISTER: - Supply and Fixing of Waist Twsiter:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.35 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail Dia 42 mm fabricated from 42 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably.Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide.
Equipment Dimensions: 1.44 m x 1.29 m x 1.35 m
Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached.
Make:- HUGO Fitness / Kompan / Koochie | 3 | Each | 45,000 ₹1,35,000 Lowest | 1,33,000 ₹3,99,000 |
Tender Value
₹25.9 L
EMD Value
₹51,886
Closing Date
5 Jul 2025, 11:00 amClosed
Dr Ashok Kumar
Urban environment Division
Providing and fixing outdoor fitness equipment in the following locations Tau Devi Lal Biodiversity Park, Sector 52A, Gurugram Tau Devi Lal Park, Sector 22, Gurugram and Maharana Pratap Swarn Jayanti Park Sector 29, Gurugram
2025_HRY_454349_1
2025C649C5B0 656E 4B61 A332 ECC47E55F47A1068001
Open Tender
Civil Works
Works
30 days
Gurugram
2 documents required · 2 mandatory
₹1,180
₹51,886
Yes
10 Aug 2025
25 Jun 2025
5 Jul 2025
25 Jun 2025
5 Jul 2025
25 Jun 2025
Amount
PULL DOWN CHALLENGER: - Supply and Fixing of Pull Down Challenger: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark- EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.88 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Pull down Bars 806 mm x 700 mm and Dia 40 mm are spaced at 630 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 2.30 m x 0.70 m x 1.88 m Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached. Make:- HUGO Fitness / Kompan / Koochie
SEATED CHEST PRESS: - Supply and Fixing of Seated Chest Press:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark- EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.88 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Bars of 1.02 m and Dia 40 mm while the handles are placed at a spacing of 698 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.82 m x 0.69 m x 1.88 m Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached. Make:- HUGO Fitness / Kompan / Koochie
SELF WEIGHTED ROWER: - Supply and Fixing of Self Weighted Rower: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark- EN 16630 certificates must be in the name of the supplier by hemselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Horizontal bars of length 1.26 m is to be schedule HOT DIP Galvanized steel with a 60mm O.D. and 2.2mm (wall) thickness of the tubing. Handle Bars of 0.74 m and Dia 38 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.26 m x 0.80 m x 1.59 m Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached. Make:- HUGO Fitness / Kompan / Koochie
RIDER : Supply and Fixing of Rider: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified international Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 0.5 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. A single seat of size 330 mm x 250 mm fixed to the top of the vertical post and two Pedals & Bars of size 145 mm x 50 mm and Dia 38 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 0.91 m x 0.65 m x 1.27 m. Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached. Make:- HUGO Fitness / Kompan / Koochie
Tai Chi Spinners : Supply and Fixing of Tai Chi Spinners:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark- EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.15 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail of Dia 477 mm made with the pipe Dia of 32 mm fabricated from 32 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety 1 BIG SHOULDER WHEEL 55,537 55,537 TAI CHI SPINNER 57,206 57,206 limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.25 m x 1.09 m x 1.49 m. Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached. Make:- HUGO Fitness / Kompan / Koochie
BIG SHOULDER WHEEL :- Providing, designing and fixing ofSupply and Fixng of Big Shoulder Wheel: " The product to match the colours, esign, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as PEMA, TUV, CPSC, or SGS only. The GS mark- EN 16630 ertificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.47 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail of Dia 0.69 m and Dia 42 mm fabricated from 42 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 0.69 m x 0.61 m x 1.94 m Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached. Make:- HUGO Fitness / Kompan / Koochie
HD HEALTH WALKER:- Supply and Fixing of Health Walker: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Foot Rest of size 361 mm x 161 mm are attached to the Standing Bars 957mm x 60 mm fabricated from 60 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings : Maintenancefree ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.18 m x 0.553 m x 1.25 m. Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached. Make:- HUGO Fitness / Kompan / Koochie
HD SIT UP STATION: - Supply and Fixing of Sit Up Station: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 0.63 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two J shaped Bars of 1.07 m and Dia 48 mm. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.48 m x 1.21 m x 0.63 m Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached. Make:- HUGO Fitness / Kompan / Koochie
HD SQUAT PUSHING: - Supply and Fixing of Squat Pushing: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Vertical bars height of 1.70 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. L shaped bars of 960 mm x 600 mm carrying two seats of 0.34 m x 0.34 m fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.93 m x 0.56 m x 1.70 m Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached. Make:- HUGO Fitness / Kompan / Koochie
HD WAIST TWISTER: - Supply and Fixing of Waist Twsiter:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.35 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail Dia 42 mm fabricated from 42 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably.Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Equipment Dimensions: 1.44 m x 1.29 m x 1.35 m Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached. Make:- HUGO Fitness / Kompan / Koochie
HD MINI - SKI: - Supply and Fixing of Mini Ski: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorised dealers or contractors. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.40 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. The Standing Bars 991 mm and Dia 60 mm fabricated from 40 O.D. galvanized steel pipes Upper part of Support Handrails of size 1.04 m high and Dia 38 mm fabricated from 40mm O.D. and 32 mm O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably.Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.07 m x 0.78 m x 1.40 m Scope of fixing: - the equipment should fixed on R.C.C foundation of required size not less than 0.6x0.45x0.45 (1:2:4) Fixed within J Bolts for anchorage complete in all respect as per drawing attached. Make:- HUGO Fitness / Kompan / Koochie
MANOHAR LAL (BID ID -1287950)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .