SPECIAL REPAIR TO BLDG NO SM-215 (STUDENT POOL MD OFFRS ACCN) AT POST OFFICE ROAD UNDER GE (MCTE) MHOW

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar, complete all as specified and directed.

Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles , complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down cement plaster on brick wall/ ceiling built in cement mortar including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.

Taking down Chowkhats with shutters (without taking off shutters from the frame) area not exc 1.5 Sqm each complete as specified and directed.

Taking down Chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but nexc 4.0Sqm each complete as specified and directed.

Taking down Shutters of any description exc. 1 sqm but n. exc 2 sqm each of any description complete all as specified and directed.

M & L for 25mm thick plain cement concrete 1: 2: 4 type B-0 using 12.5mm graded stone aggregate as in base floor or maintain to even surface complete all as specified and directed.

M & L for Vitrified Coloured Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M & L for Vitrified Coloured Ceramic tiles 10mm thick light shade (square/ rectangular) on vertical surfaces such as skirting including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed, complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick of any shade (square/ rectangular) area of each tile as in floors exc 0.11 and not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding layer in cement sand mortar 1:6, complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface 450 x 300 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.

M&L for non skid ceramic Colour floor tiles 300x300x7 mm including bedded and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for glazed ceramic Colour tile wall tiles 300x200x7 mm including bedded and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including10 mm thick rendering in CM 1:3 all as specified and directed.

M&L for 300 x 300 x 10mm thick heavy duty Colour ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Machine cut mirror polished kota stone slab flooring with rounded edge 20-25mm thick over cement screed bed (1:6) 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

M&L for Machine cut kota stone skirting 18-20mm thick in riser of steps skirting, dado, and pillar over 10mm thick backing coat in cement mortar in (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing complete all as specified and directed.

Mirror polishing to existing kota stone flooring, complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles ,complete all as specified and directed

M&L for Cement concrete type B-2 1:5:10, 40mm graded stone aggregate filling and mass-concrete in sunken floor complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and fair incl cutting joints and filling with bitumen and sand mixture complete all as specified and directed.

M&L for brick work built in cement mortar (1:6) using sub class “B” bricks (old) size bricks straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4 mixed with WPC @ 3% by weight of cement or as per manufacturer instruction, finished fair and even without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid for seprately as supply only under respective item as specified and directed.

M & L for rendering 15 mm thick on ceiling in two layers Ist layer 10mm in cement mortar (1:4) on faces of brick work and 2nd layer 5mm in cement mortar (1:4) and finished the surface fair and even using WPC complete all as specified and directed. Note : WPC shall be measured and paid separetely

M&L for rendering, 5mm thick in CM 1:4, on ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surface applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm , complete all as specified and directed. Note : Written warranty for four years or as per manufacturers instructions, whichever is more shall be given by the Contractor for efficacy of this item.

M&L for preparation of newly plastered or plastered surfaces of walls and applying two coats Distempering walls with distemper oil emulsion, white or tinted, over a coat of alkaline resistant primer over one coat of wall care putty 1 mm thick complete all as specified.

M&L for preparation of newly plastered or plastered surfaces of ceiling and applying two coats Distempering walls with distemper oil emulsion, white or tinted, over a coat of alkaline resistant primer over one coat of wall care putty 1 mm thick complete all as specified and as directed.

M&L for Preparation of Newly plastered surface and applying three coats of white wash on wall complete all as specified and as directed.

M &L for preparation of newly plastered surface and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of complete removal of existing treatment on surfaces of walls,surfaces should be free from any loose paint , for applying two coats of 100% Premium exterior acrylic emulsion paint latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and and directed. Note : Written warranty for four years or as per manufacturers instructions, whichever is more shall be given by the Contractor for efficacy of this item.

M&L for complete removal of existing treatment and preparation of of wall, washing, scrubbing down and stopping of distempered and painted surface old plastered/ decorated surface and applying 1mm thick cement base wallcare putty for smooth finished of the surface and applying two coats of Acrylic oil emulsion over a coat of alkali resistance primer complete all as specified and directed.

M &L for preparation of plaster surfaces of ceiling and applying two of distemper oil emulsion all as directed by Engr-in-Charge.

M&L for preparation of old plaster surfaces of ceiling and applying two coat of white wash, complete all as specified and and directed.

M&L for preparation of old plaster surfaces of wall and applying two coat of white wash complete all as specified and and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with reinforced with M.S. Square tube, supplying & fixing in opening as per specification, complete all as specified and and directed.

S&F Factory made solid panel pvc door shutter 30mm thick consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15 x 15mm for top & bottom rails. M.S. frame shall have a coated of steel primers of approved make and manufacture. MS frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm thickness ,70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming styles and 5mm thick 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to from top and bottom rail and 115mm vide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to from lock rail. Top, bottom and lock rail shall be provided either side of the panel 10mm (5mm x 2) thick, 20mm wide cross PVC sheet to be provided as gap insert for top rail & bottom rail. panelling of 5mm thick both side PVC sheet to be fitted with MS frame welded/ sealed to the stiles & rails with 7mm (5mm + 2mm ) thick x 15mm wide PVC Sheet beading to inner side and jointed together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C channel using PVC solvent adhesive etc. supplying & fixing in the frame at site as per specification & drawing

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS sqare tube, complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes at top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and and directed.

S&F Pressed steel frames for doors size 125 x 60mm x 1.5mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and and directed.

S&F Pressed steel frames for doors size 105 x 60mm x 1.5mm thick with one rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and and directed.

M&L for Providing, cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate for filling of Pressed steel frame etc, rounded or chamfered on edges complete as specified, supplied and fixed.

M&L for Cutting holes in brick/ block walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick n.exc one brick complete all as specified and and directed.

S&F 40 mm thick factory made door Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and and directed.

S & F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, Hold fasts wall ties hooks for hanging fans, plain angle etc complete all as specified and and directed.

S & F 35mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, moulded on solid (for each side) supplied and fitted to chowkat ,complete all as specified and and directed.

S&F Factory made 35mm thick second class hard wood skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass/ wire mesh, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8. clause 8.20 (a); supplied and fitted to chowkats, complete all as specified and and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and and directed.

S&F in repair anodised aluminium curtain rod/ rail 25mm dia and thickness not less than 0.75mm complete all as specified & directed.

S&F in repair Stainless steel curtain rod brackets 25mm dia including necessary stainless steel clamp complete all as specified & directed.

S&F powder coated aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremesh including removing old steel ventilators incl finishing the demolished surfaces with rendering 10-15mm thick CM 1:4 of fair finishes including 02 coat of cement based paints with primer incl all fittings, accessories etc all as complete all as specified and and directed.

S & F of Powder coated aluminum three track sliding shutters two Glazed shutters and one guazed shutters(with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces. (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter - 01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall - 06 No per window.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard dawn steel spring, fixed in floor, complete all as specified and and directed.

S&F Butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21 of size 100mm

S & F Aluminimum anolised barrel tower bolt of extroded section 200mm long, complete all as specified and directed

S & F Aluminum handle cast type anodized size 150mm long, complete all as specified and directed.

S & F Aluminimum anolised barrel tower bolt of extroded section 150mm long complete all as specified and directed

S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and and directed.

S&F Brass handles 100mm size, cast type, polished bright as approved by Engr-in-Charge complete all as specified and directed

S&F100mm size Hasp & staple aluminium anodised, safety type, including bolt to hinge plate and fixed with screw , complete all as specified and directed.

S&F Stainless steel wire cloth, 0.56mm nominal dia. of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring), complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash asteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified and directed.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M & L for preparation of old painted surface of wood over 10 cm width or girth and applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of Old steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamelled paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed.

S&F in repair Vitreous china squatting Pan 'Orrisa" Pattern size 580 x 440mm white with integral foot rest, P or S Trap, and cement concrete bedding complete & making good disturbed ground, complete all as specified and directed.

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed.

S&F in repairs vitreous china, white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed.

S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwed down for 15mm GI bore pipe complete all as specifed and directed.

S & F in repairs Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge. Make Jaquar Cat Part No CAN-CHR-1173& techno communally equivalent tlid/ Marc, Plumber, Cera as approved.

S&F in repair brass chromium plated bottle traps for wash basins with inlet and outlet screwed for connection including necessary packing, union and cup and fixed 32mm dia bore of trap.

S&F in repair chromium plated brass Basin mixer long neck without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed.

S&F in repair 150mm dia CP Towel Ring complete all as specified and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25m Long PVC Flexible Tube & ABS Wall Hook, complete all as specified and directed.

S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.

S&F Grating 100mm dia of CP with or without hole complete all as specified and directed.

S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed

S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.

S&F 15mm bore brass CP Pillar tap swan neck ( sink cock) with provision of iron pipe and fixed complete all as specified and directed.

S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. complete all as specified and directed

S & F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S & F in repairs Toilet Paper Holder Stainless Steel fixed to wall al as complete all as specified and directed

S & F in repairs Stainless Steel Wall Mount Soap Case fixed to wall all as complete all as specified and directed

S & F in repairs aluminium alloy brackets and guard rail 5.5mm Glass Shelf of Size 12 cm wide 60 cm long complete all as specified and directed

S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern), Stop cock/ angle cock complete all as specified and directed

Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S&F for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

Taking up or down steel tubing and connections for bore of tube 20mm, complete all as specified and directed.

S&F GI tubing Medium grade galvanised with all fitting and fixed bore of tube 20mm, with necessary union, socket, niple etc complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in Stone, concrete block or slab walls

Taking down Old PVC or AC rainwater/ waste/ vent pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and directed

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete complete all as specified and directed

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete complete all as specified and directed

S&F in repairs PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75mm bore complete all as spcified.

S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 110mm bore complete complete all as specified and directed

S&F PVC floor trap, with grating 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), in repairs and including water leak proof treatment complete all as spcified.

Dismantling water tanks and removing to store exc 250 & n. exc 500 litres capacity, complete all as specified and directed

Dismantling water tanks and removing to store exc 500 & n. exc 1000 litres capacity, complete all as specified and directed

S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I 500 litres capacity, complete all as specified and directed

S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I 1000 litres capacity, complete all as specified and directed

S&F in repair 20mm dia Ball valves,of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15 to 25mm to 142 - 455 gms), complete all as specified and directed

S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed, complete all as specified and directed

M & L for fixed in repairs 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cupboard complete all as specified and directed.

S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter.,18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification.

S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 12mm thick required size consisting of panel of 12mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 12mm width x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement complete all as specified and directed

S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement complete all as specified and directed

S&F stainless steel shelf closing hinges 75mm size for PVC door shutters complete all as specified and directed.

S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed.

S& F 100mm size MS mat/ glossy finish handle complete all as specfied and directed.

S&F modular type stainless steel Cutlery basket size 20 x 19 x 4 inches 9 dia of wire not less than 3.00mm of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed.

All as per item No.123 above but plain basket size 20 x 19 x 6 inches complete all as specifed and directed.

All as per item No.123 above but thali basket size 20 x 19 x 8 inches complete all as specifed and directed.

All as per item No.123 above but cup & saucer basket size 20 x 19 x 4 inches complete all as specifed and directed.

All as per item No.123 above but grain basket size 20 x 19x 6 inches complete all as specifed and directed.

All as per item No.123 above but plain basket size 20 x 19 x 8 inches complete all as specifed and directed.

Taking down existing water proofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified and directed

M&L for PCC 25mm thick (1:2:4) type Bo using 12mm graded stone aggregates mixed with integral water proofing chemical PIDI PROOF-LW mixed in proportion of 200ML/50Kg cement of DR fixit of pidilite industries Ltd or STP No.1 (Liquid) of STP Ltd in proportion 200ML/50Kg cement as in padding on roof surfaces for correcting/ making proper slope on roof/ chajja and roof kerbs/ benching complete all as specified and directed.

M&L for water proofing treatment on non approachable/ non accessible roof surfaces (Horizontal/ vertical) in following sequences through manufacturer/ authorised applicator of the manufacturer complete all as specified and directed complete. (a) Properly cleaning and drying cement surfaces. (b) Applying one coat of oxidized bitumen based solvent primer @ 0.3Kg/sqm. (c) Laying 3mm thick APP modified water proofing membrane with 100mm over laps sealed & bonded to the surface by torchon method. (d) Applying two coats of bituminous aluminium paint @ 200 gram/ sqm (minimum). (Note :- Make/ brand of APP membrane modified with all associated items shall be of any one of SUPER THERMOLAY OF STP LTD OR TORH SHIELD P-3160 OR PIDILITE INDUSTRIES LTD OR HYPER PLAS PLOLYSTER or equivalent approved make including necessary testing for leak proof/ water proof & 10 year gaurantee alongwith Security Deposit there of

M&L for 10mm thick screed bed on concrete surfaces in CM(1:3) finished even and smooth without using extra cement complete all as specified and directed

M&L for water proofing treatment to sunken surfaces of the slab in following sequences:- (with 10 Years Gaurantee) (a) Slope correction by using M-20 (Nominal Mix) concrete minimum 25mm thickness at one end and a slope of 1:20 by using 12.5mm graded stone aggregate with integral water proofing Chemical PIDI PROOF-LW mixed in proporation 200ml/ 50 Kg cement of DR Fixit of Pidilite Industries Ltd or STP No 1 (liquid) of STP Ltd in proportion 200ml/ 50 Kg cement or equivalent as per manufacturer instructions complete.

(b) PCC padding with cement concrete 1:1.5: 3 type A 0 (using 12.5mm graded stone aggregate) 25mm thick with integral water proofing compound "Dr Fixit" manufactured by M/S Bouchemic or equivalent as per manufacturer instructions complete all as specified and directed

(c) Vertical sides plastered in CM 1:3, 15mm thick with WPC and 72 hours testing for water tightness by ponding of water complete all as specified and directed

(d) Supplying and applying Smart care tile Adhesive or equivalent for tiling purpose and smartcare tile grouts of specified shades to seal between the tiles etc complete all as manufacturer instruction, complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/ loose soil

M&L for cement concrete type D-2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete incl sub base of floors. complete all as specified and directed.

M&L for RCC type A 1 1: 1.5: 3 (20mm graded aggregate) including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC type A 1 1: 1.5: 3 (20mm graded aggregate) as in lintels, bands, coping etc including necessory form work complete all as specified and directed.

M&L for RCC type A-1;1.5;3 (using 20mm graded stone aggregate) as in column pillars post complete all as specified and directed.

Formwork to sides of concrete in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete. complete all as specified and directed

Formwork to sides of pillars, posts, struts, columns etc, rough finished surfaces of concrete. complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item No.138 above but 5mm and over and including 10mm dia in stirrups, spacers, binders complete all as specified and directed.

M&L for brick work in modular size with sub class "B" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finished even and smooth without using extra cement. complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/ loose soil, complete all as specified and directed.

Removal of excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point. , complete all as specified and directed.

M&L for providing pre-cast cement concrete 1:2:4 type B0 using 12.5mm graded lovers and jallies 35mm thick including all moulding frame set in cement mortar 1:4 complete all as specified and directed.

S&F rolled sections as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (beam, tee, angle, channel pipes, tubes, plates and flat sections etc) including distances pieces, cleats etc cutting half brick thick wall and fixing with cement mortar complete all as speified and directed of grade FE-410, (gde-E-250) quality all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed.

Taking down existing ceiling fans any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/connector complete all as specified and directed

Taking down carefully copper/ aluminium Sub main wiring of any size from surface/concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down existing Gysers 25 ltr in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from Metal clad to Gyser complete all as specified and directed.

Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and re fixing the same with rectangular wooden box near to V-TPN MCCB Box cairfully after compltion of B&R Work complete all as specified and as directed.

Taking down old/ unserviceable LT indoor panel, distribution board by disconnection of electric connection carefully SPN DBs/ TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2mm thick, 60mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- (a) One light point controlled by one, one way switch 5 Amps

One light point controlled by two, two way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed

One 3 point 5 Amps switch socket outlet point controlled by one switch on the SAME BOARD. complete all as specified and directed

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. complete all as specified and directed

One bell point controlled by one, bell switch 5 Amps, complete all as specified and directed

All as per item No 156 here in before but using 2.5 sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 2.5 sqmm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. complete all as specified and directed

All as per item No 156 here in before but using 4.0 sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 4.0 sqmm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point), complete all as specified and directed

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified and directed

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified and directed

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and directed

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed

S & F for for Bell push modular 6 Amps single module complete all as specified and directed

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and directed

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm for P & N one run of earth 6sqmm and one run of PVC conduit will be measured as one unit.

All as per item No.168 here in before but using 4.0 sqmm cable, complete all as specified and directed

S & F for lamp holder, PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

S & F for Highly efficient LED Bulbs, 10 watts in B-22 cap complete all as specified and directed.

Supply and fixing Inverter LED batten with square profile and polycarbonate channel. Lithium lon battery with bcharging time 8 hourse -10 hourse and back up time upto 4 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed. Make : Havells LHEXACP7FN1W020 or equivalent make of Bajaj/ Philips/ syska/ Crompton/ Shakti

S & F for Decorative wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 7 W LED lamp B22 base and including fixing of LED bulb 7 watts complete all as specified and as directed. Make : Havells Cat Part No. LHFOAJE1TZ1I060 or its equivalent in Philips, Wipro, Havells, Shakti.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make : Havells Cat Part No. LHEXACP7IN1W010 or its equivalent model in Wipro, Philips.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 01 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make : Bajaj Cat Part No. BIBWP 10W LED or its equivalent in Philips, Wipro, Havells, Shakti.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge. Make : Bajaj Cat Part No. ENXT P 24L WH CR PC SD (Edge plus series) or its equivalent in Philips, Wipro, Havells, Shakti

S & F for sheet metal enclosure MCB, DB, SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F in repairs flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for 100-125 amps MCCB as incomer and SPN/TP MCBs as out going, 4 way (Optium 1+12 Module) complete all as specified and directed

S&F (in replacement) MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 63 Amps rating, 16 KA breaking capacity complete all as specified and directed

S&F MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed

S&F MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed

M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps complete all as specified and directed.

S & F for Modular type TV Socket out let complete all as specified and as directed.

S & F for Modular typeTelephone socket outlet complete all as specified and direced.

S&F plastic body exhaust fan, AC single phase 230/ 240 V of size 250/200mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed.

S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20mm dia for telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

Sppply & Laying XLPE insulated, armoured, electric cable of size 35sqmm 3.5 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed.

Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply laying and jointing GI pipe 'light grade' 40mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

M & L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed. (Note : Punned thickness shall be measured)

M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate No 3 of SSR part-I including excavation and earthwork in any type of soil/ strata and testing on completion. Note :- GI earth wire 4mm dia and 15mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

PRABHAT SINGH PARMAR

Jamna Constructions

BHATIA ASSOCIATES

M/s Shree Ganesh Traders

M/S GARG CONSTRUCTION

sunway associates

M/S Ashish Construction