Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹68.4 L H NO L 107 BLOCK L JJ COLONY WAZIRPUR NORTH WEST DELHI 110052 PH 9971712094 9911112094 | ₹68.4 L |
Tender Value
₹83.6 L
EMD Value
₹83,615
Closing Date
25 Feb 2026, 11:00 amClosed
Renovation work comprising of Civil Works, Electrical Works, HVAC, fire fighting work, furniture work, etc.
NSL/CEO/NSPCL/NIT/2026/828
NSL/CEO/NSPCL/NIT/2026/828
Open Tender-Domestic
Miscellaneous
New Delhi, Delhi
₹2,950
₹83,615
17 Feb 2026
17 Feb 2026
25 Feb 2026
25 Feb 2026
11 Mar 2026
BILL OF QUANTITIES (BOQ)
Name of Work: Renovation of Reception and adjoining area of NSPCL Head Office at New Delhi
S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)
1 CIVIL & INTERIOR WORKS 6,35,618.31 50,67,847.21
3 FURNITURE 3,65,000.00
TOTAL i/c GST 83,61,494.38
Digitally signed by AMIT
Name of Work: Renovation of Reception and adjoining area of NSPCL Head Office at New Delhi
Summary of Civil and Interior Works
S.No. Description of Works Amount
Amount (SR, in Rs.)
1 Dismantaling
2 Masonry & Plaster
3 Flooring, Paving & Wet Works
4 Partitions & Wall Cladding
7 Finishes & Miscellaneous
GRAND TOTAL (Carried Forward) 57,03,465.52
GRAND TOTAL (Carried Forward) 57,03,465.52
Digitally signed by AMIT
Name of Work: Renovation of Reception and adjoining area of NSPCL Head Office at New Delhi
S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT
CIVIL & INTERIOR WORKS
1 DISMANTALING
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50
15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 140.00 113.35 15,869.00
MR Based on Dismantling stone work in Wall dado laid in cement mortar including stacking material within 50 metres
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and
disposal of unserviceable material within 50 metres lead.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal
of rubbish to the dumping ground within 50 metres lead.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,
architrave, holdfasts etc. complete and stacking within 50 metres lead:
a 15.12.1 Of area 3 sq. metres and below EACH 8.00 367.20 2,937.60
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including
1.6 MR disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as SQM 250.00 56.35 14,087.50
directed by Engineer-in-charge.
Demolishing cement concrete manually / by mechanical means including disposal of material within
50 metres lead as per direction of Engineer-in - charge.
15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) CUM 12.00 2,434.25 29,211.00
Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and
disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.
Extra for cutting reinforcement bars manually / by mechanical means in R.C.C. or R.B. work (Payment
1.9 15.5 shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer - in - sqm 10.00 1,147.20 11,472.00
1.10 15.6 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. kg 20 9.05 181.00
Dismantaling/ removal of the existing furniture and services of the electrical, fire alarm, low voltage,
HVAC etc. services, both low side and high side including all fittings and fixture during all phases of the
project, as per the instructions of engineer in charge. All the salvagable material shall be stacked with
due covering and precaution so that it may be reused as per the insturctions of the engineer in charge.
The item to include all leads and trasportation of the salvagable and non salvagable material,
including sorting, within the site at a designated location.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by
mechanical means, including loading, transporting, unloading to approved municipal dumping
ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts
SUB TOTAL OF DISMANTALING 1,02,196.45 52,999.50
2 MASONRY AND PLASTER
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a
2.1 11.3 floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc.
11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 170.00 614.20 1,04,414.00
POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP Punning over
cement plaster in line & plumb finished smooth to receive paint. (Internal surfaces of walls). Digitally signed by AMIT
S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT
SUB TOTAL OF MASONRY AND PLASTER 1,04,414.00 5,790.21
3 FLOORING, PAVING AND WET WORKS
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the
manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand &
manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse
3.1 11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and
matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of
tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and
rubber mallet for placing the tiles gently and easily.
11.41A.2 Glazed vitrified floor tiles polished finish of size
Grouting the joints of flooring tiles having joints of upto 5 mm width, using epoxy grout mix of 0.70 kg of
3.2 MR organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /
grouting and finishing complete as per direction of Engineer-in-charge.
ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In
3.3 MR Natural Finish. Thickness 1.30 to 1.50mm. Designed to conceal screws. Seamless finish. Complete with RMT 135.00 360.35 48,647.88
Rubber/ PVC Jointers and Gasket.
Supply of modular carpet of approved model and shade and made with 100% nylon 6/6.6 tufted
textured tiles/ plank of all sizes as approved, stain resistant, anti microbial, and having colour fastness to
water, fastness to light, rubbing fastness and castor chair suitability as per relevant standard for heavy
commercial usage, with 100% PVC free Backing with having average density 6000 oz/cu. yd. or
3.4 MR more,Nominal total thickness of 5.9mm, and Pile weight – 16-18 oz/ sq yard. Material shall be CRI SQM 65.00 3,126.41 2,03,216.93
GREEN LABEL PLUS certified, and shall have recycled content complying to GRIHA requirement,
including fixing with GRIHA compliant adhesive of approved make, minimum 15 years manufacturer's
warrantee, all complete as per drawings, manufacturer's specifications and direction of Engineer in
TOTAL FOR PAVING & WET WORKS 1,88,874.00 2,87,190.42
4 PARTITIONS AND WALL CLADDING
GLASS PARTITIONING:- Providing & Fixing Full Height Glass partition using 12mm Thk. Glass with anodised
Aluminium frame fixing glass with snap on option consisting of top, bottom and side frame measuring 40-
46mm x 18mm-26mm complete with glazing rubber as per manufacturer's specifications and
4.1 MR instructions of Engineer- in-charge. Rate include supply & Installation of 12 mm thk toughened glass SQM 24.00 6,015.51 1,44,372.21
with double sided adhesive tapes for glass to glass butt joints. Partition system from FFL to False Ceiling
level, inclusive of cost of support required for fixing in the ceiling. The frame to be powder coated in
desired shade as per the instructions of the Architect.
PARTITIONING - Partition using 12mm thick HDHMR fixed on both sides on aluminium Studs Frame 50mm
x 50mm x 1.5mm as per approved sample and architectural drawings placing the same 600mm c/c.
Aluminuim frame to be fixed to floor and RCC Ceiling using fastners. The cost to include finishing visible
edges with 12mm thick mdf strip as per detail drawings.
Digitally signed by AMIT
S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT
Supply & Installation of solid manual Operable Acoustic Partition consisting of series of 100 mm thick
individual movable elements travelling along the ceiling track assembled to form a solid wall. The entire
system must function as a solid wall and even when closed should reveal minimal screws, fixing or other
similar solid metal parts. The sound insulation of the operable partition should be 50dB tested under third
party reputed laboratory in accordance to EN 20140-3. The test certificate should show the make and
model of the system.
Elements must be constructed of a torsion-free steel horizontal tube frame and torsion-stiff vertical
aluminium profiles, bolted together to make the element strong and sturdy. The frame must be clad
either side with 16mm MDF panels hung in acoustic free suspension from the panel frame. The panel
skin shall be installed on site and able to be replaced without totally disassembling the panel frame.
The element must be constructed in accordance with the specified sound insulation requirements. The
elements must be inter-connected by means of a positive locking concave/convex aluminium profile
with an integrated magnetic strip and sealing lip having a linear attraction of 40N/m. The spindle
mechanism in every element should be connected to the top and bottom horizontal seals which
should be constructed of aluminium plates with flexible rubber at the contact point. Specially formed
polyurethane corner rubber seal to be provided for overlapping acoustic seals horizontal sealing strip.
Each element must have a spindle mechanism which should be connected to the spring loaded top
and bottom retractable seal. The spindle mechanism should be operated manually by a bayonet
connected crank handle that acts as a lock in function during cranking process. The horizontal top and
bottom seals must be retracted as per the operating mechanism and should ensure a contact pressure
of 800N when the seals are completely extended. The spring loaded retractable horizontal seals should
also be able to adjust to minor floor undulation for better accoustic efficiency. The seal spindle
mechanism must be accessible while the panel is hanging for servicing and adjustment if necessary.
Total disassembly of the panel frame to access internal components is not acceptable. No fixed
sweep seals allowed in top and bottom of the element that would rub against the track or floor while
moving the element.
The telescopic element or the end closure element must open and close 120mm horizontally through
an additional telescopic panel made of 16mm MDF provided and fixed to the telescopic element. The
movement of the telescopic panel and the operation of the horizontal top and bottom seal and must
be operated by a single mechanism. The telescopic element must maintain all the same quality criteria
as the other elements.
Sound Baffle/Barrier above Operable Partition
After installation a sound barrier is erected between the false ceiling and the RCC ceiling using two 12.5 SQM 12.00 79,000.00 9,48,000.00
thick gypsum boards on each side of the track filled with a mineral wool mattress and fitted to a G.I.
sheet framework. All cracks, joints, openings are caulked with special compound and taped over to
form a solid wall of the same STC as of the partition. The efficiency in sound insulation of a partition
depends on its installation, which has to be done in order to achieve the same insulation coefficient
above the false ceiling as that of the movable wall.Entire work to be done as per drawing,
specifications and as per directions of Engineer-in-charge.
PANELLING- Panelling using 12mm thick HDHMR fixed on one side on Aluminium Frame 50mm x 25mm x
5.3 MR 1.5mm as per approved sample and architectural drawings. Aluminium frame to be fixed to walls, floor SQM 220.00 2,477.47 5,45,042.67
and RCC Ceiling using fastners.
VEENER CLADDING- Providing and Fixing 4.0 mm thick decorative/ Natural Veneer of approved design
and shade, cladded on to existing surfaces. (base rate Rs. 1750/- sqm)
Digitally signed by AMIT
S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade
texture with following process in the sequence as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of
160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st
coat and 2nd coat is allowed to dry for 8 to 12 hrs.
3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove
excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied
with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be
allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to
dry for 12 hrs.
4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and
melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is
again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is
applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed
in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2
layers without gap of time.)
LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing Plywood
Providing and fixing of 1.25mm thick high pressure decorative laminates (conforming to applicable
IS:2046-1995, EN 438-3: 2016, NEMA LD3-2005 quality standard), made out of urea free, thermosetting
phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on
the finish surface.
Performance properties of laminates must meet having a minimum density of 1.35g/cm3 and possess
Anti-viral, Anti-Fungal & Antibacterial properties and fulfil the criteria of FSC, Greengard-Gold, GRIHA &
GreenPro certification. Surface of laminates accomplice the properties as per classification HGS Grade
for Resistance to surface wear (350 revolutions), Resistance to cigarette burns (Rating-Not worse than 3)
, Resistance to staining(Rating 5), Resistance to dry heat @180°C (Rating 4), Resistance to cracking ( >4
rating) & Resistance to scratching(>2.0 N) . Resistance to Color Change-Xenon Arch Lamp (Rating
Color/Decor, size and finish of laminates should be agreed and finalized under direction of the in-
charge. The cost to include pasting over 4 mm thick MDF and fixing on existing surfaces as per
directions of engineer-in-charge.
INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS:
8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh
screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per
directions of Engineer-in-Charge.
Providing and Fixing Channeled Woodworks perforated panels of width 192mm, thickness of 15mm and
length 2400 mm or as specified by the Architect/ approving engineer, made of a high density fibre
board with minimum 725 Kg/M3 density substrate with a laminated facing as per the approved shade
& finish and a melamine balancing layer on the reverse side. The boards shall have a special
perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and
5mm/13mm/21mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to
receive special clips for installation. The back of the perforated panel shall have sound absorbing non-
woven acoustical fleece having NRC of 0.52-0.63. The panels shall be mounted on special aluminium
splines using clips. The works to be done complete as per drawings and satisfaction of engineer-in-
Digitally signed by AMIT
S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT
Supply of VMT Embossed 12mm PET panels which shall be processed with VMT technology for surface
customised colour options with available pattern as per the designers requirement, the panel shall be
-100% polyester fiber, with up to 70% recycled fiber. size of panel 2800mm x 1200mm (± 0.5mm).
Panel Should be mostiure resistant and also Non-toxic, non-irritant, and fire-resistant complying with
safety standards confirm to Class 1 Fire Ratings tested as per BS 476 Part 6 (Fire Propagation) & Part 7
(Surface spread of flame) ASTM E 84 CLASS A, EN 13501 PART 1C,s2,d0 for interior applications.
Noice reduction coefficient (NRC) - 0.3 with direct fix method, 0.85 with 25 mm gap with infill, 0.95 with
50 mm gap with PET WOOL infill.
The product should be 100% make in india and OEM must have ISO CERTIFICATIONS- complying to-
IGBC Membership
ISO 14184-2 (Release formaldhyde)
ISO 9001 (Quality Mangement System)
ISO 14001 (Environmental Management System)
ISO 45001 (Ocupational helth & safety management system). The cost to include all required adhesive/
fixing arrangements complete as per instructions of engineer-in-charge.
LAMINATED STORAGE CABINET FOR GENERAL STORAGE- Out of 18mm thick HDHMR Board finished using
1mm thick laminate. The storage shall be complete with all hinges, drawer glides and hardware from
4.11 M.R. approved make. All internal surfaces to be completed using balancing laminate. Including brass D- SQM 10.00 12,003.13 1,20,031.34
type handles for shutters and recessed type handles for drawers. Storage to be of all heights as per
design. Storage shutters to be made in solid laminate/ glass as per design and drawings.
VENEER STORAGE CABINET FOR GENERAL STORAGE- Out of 18mm thick HDHMR Board finished using
4mm thick veneer and polished in melamine to match the veneer cladding item. The venner to be
same as the venner cladding under separate sub- head above complete with all hinges, drawer glides
4.12 M.R. and hardware from Hettich or equivalent. All internal surfaces to be completed using balancing SQM 5.00 15,651.17 78,255.84
laminate. Including brass D-type handles for shutters and recessed type handles for drawers. Storage
to be of all heights as per design. Storage shutters to be made in solid veneer/ glass as per design and
STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS- Cabinet Shutters out of 18mm
thick HDHMR board finished in 1mm Laminate. Shutters to be fixed to a frame. Rigidly fixed on both
sides and top finshed in laminate. No internal carcass required. All Hinges of hettich or equivalent.
Internal Surface of the shutter in balancing white laminate. All shutters to be provided with Stainless
steel louvers at the top and bottom of the shutter as per the site requirements and instrcution of the
Engineer In charge.
Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered glass manufactured industrially
by curtain coating process with PU lacquer (50 micron thick), opaque (if viewed against a support wall)
conforming to EN 16477 standards for back painted glass , of approved color by Architect/ Client fixed
with compatible Silicone having Shear Bond Strength (Dry, 24 hours), greater than 450 kpa and tack
free time of 10 to 30 mins compatible for installation of mirror and lacquered glass / Foam based
double sided adhesive tape for instantaneous adhesion, compatible with mirror and lacquered glass
having Shear bond strength (Dry, 15 mins) of 250 to 350 kpa) on a perfectly leveled 12mm thick water
proof marine plywood / MDF / Mineral fibre board which is mounted on the RCC wall/any other
structure. The contractor should submit test reports for backpainted glass from manufacturer - High
humidity Resistance (conforms to BS EN 1036 1999); Color fastness ISO 105B02 standard & Mechanical
Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 ( Cross Hatch Test ) standard The manufactured
backpainted glass should be environmentally friendly (no lead, no arsenic, no copper,
noformaldehyde); appropriate recycled content (12% post industrial / 6% post consumer); compressive
strenght (1000 MPa) & tensile strenght (40 MPa),same as float glass
Digitally signed by AMIT
S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT
Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved make and colour using approved
Adhesive to 12 mm thk. Waterproof Plywood of approved brand as per shape, pattern & details given
4.15 M.R. in the drawing. The rate includes providing & fixing beading, cutting, scaffolding, nails, all materials, SQM 8.00 15,955.16 1,27,641.29
labour, lead, lifts, HOM etc., complete.-for Lift Cladding. (The make, Shade, pattern etc., to be
approved by EIC).
SUB TOTAL OF PARTITIONS AND WALL CLADDING 43,334.00 34,05,628.05
GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing and fixing of
frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc
coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm
wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to
the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed
to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other
end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of
1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with
tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a
direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x
230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high
having flanges of 20 mm and 30 mm long.
Including jointing and finishing to a flush finish of tapered and square edges of the board with
recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers
covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per
manufacturer's specification and also including the cost of making openings for light fittings, grills,
diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings,
specification and direction of the Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS
certification marks)
600 x 600mm ACOUTIC GRID CEILING - SITC of acoustical grid ceiling with tegular edge and 15 mm
thickness, visible surface of each tile is 7 mm below the grid, visible surface is a batch painted glass
tissue in white, back of the tile covered with glass tissue. Size -600x600x15mm Manufacturing-
Manufactured in Sweden, production unit is ISO 14001 certified. Acoustics-Sound absorption Class -
Class C at 200 mm o.d.s as per EN ISO 11654, NRC - 0.8 NRC as per ASTM C 423, Fire Safety - Tested and
classified as non combustible according to EN ISO 1182 with reaction to fire classification class A2 s1 d0
according to EN 13501-1 - European Standard. Flexural tensile strength - Class C/3N Indoor Air quality -
Complying with the French regulation on VOC emissions, A+ level. Certified by the Finnish Building
Information Group (RTS) with the M1 label. Environmental Footprint - Environmental Product declaration
(EPD) acc to international ISO 14025 & EN 15804 series of standards. Circularity - Minimum post-
consumer recycled content 51%, Fully recyclable. Humidity Resistance -Class C, relative humidity 95%
and 30°C, according to EN 13964:2014. Light Reflectance - 80% light reflectance. Cleanability- Weekly
dusting and vacuum cleaning. Accessibilty - The tiles should be easily demountable, The cost to
include all necessary hardwares required for suspending and fixing the ceiling.
Digitally signed by AMIT
S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT
PERFORATED CEILING - Supply and installation of suspended Ceiling including 20x28x30x0.5mm
Perimeter Channel {Material- GI(IS513),YS-260Mpa,Finish- Galvanised 150GSM (IS277)} is fixed along the
perimeter of existing wall with the help of impact anchor at 600mm centres. 25x10x0.5mm Ceiling Angle
{Material- GI(IS513),YS-260Mpa, Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the
27x37x25x1.6mm soffit cleat {GI(IS513)YS-260Mpa, Finish-Galvanised120GSM (IS277)}. Soffit Cleat and
Rawl Plug- Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating(7 to 8 microns) pull out load- 6.8kN for
M30 concrete grade} creating 1000mm x 900mm grid.15x45x15x0.9mm Intermediate channel {Material-
GI(IS513),YS-260Mpa,Finish-Galvanised150GSM(IS277) fixed to the ceiling angle at every 1000mm c/c}
and Ceiling Angle is fixed at every 900mm along the length of Intermediate channel with M6 x 12mm
Hex Bolt & Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13
metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14
micron.}. 80x26x0.5mm Ceiling Section {Material-GI (IS513),YS-260Mpa, Finish-Galvanised
150GSM(IS277)} is then fixed to the Intermediate Channel {Material-GI(IS513),YS-260Mpa, Finish-
Galvanised 150GSM(IS277)} with the help of Connecting Clip {Material -High carbon spring steelwire
(BS970Gr.En42),46-48HRC, Finish-Zinc plating 4-6 micron} and in direction perpendicular to the
Intermediate channel at 327mm c/c. Boarding shall start from the center of ceiling area. Single layer
12.5mm board of size 1200x1960mm having all four square edges, 10% perforation area of board &
hole size of 8,15 & 20mm diameter , scattered spacing, backed with acoustic tissue, having NRC values
0.55, is then screw fixed to ceiling section with 30mm Rigitone screws/ 25mm drywall screws {Material-
Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 170mmcentres. For higher
NRC value, Resin bonded glass wool of 24kg/M3 and 50mm thick can be placed on topof the board.
Finally all square edges ofthe boards are to be jointed and finished so as to have a flush look. The joint
filling using joint filler and joint filler set technique should be employed for the joint-less installation of
perforated boards with continuous Perforation. After installation and joint-filling, the boards should be
primed and then painted with a short haired paint roller. Paint should not be applied using a brush or
spray diffuser . Serrated steel section has effective thickness of 2T (2xdepth), better load carrying
capacity, enhanced screw retention,Improved acoustic performance & fire resistance as compared
to plain steel section.
TRAP DOOR :- Providing and fixing trap door in false ceiling made of "pre-laminated board with
5.4 MR hardwood framing, dead locks, lapping all around including all hardware, hinges etc. complete as per SQM 1.00 2,935.70 2,935.70
design and drawing.
CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made hardwood
framings hung from ceiling @1000mm centre to centre with 2 nos of 6mm thk. Commercial ply on
vertical & 12mm thk. Commercial ply on horizontal surface (straight & curved). Inclusive of finishing in
Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm to macth the
specifications same as gypsum ceiling.
GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral fibre/ gypsum
ceiling. In order to make the Mineral Fiber/ gypsum ceiling higher than the Gypsum Ceiling by upto
100mm as per drawings. (visible surface of gypsum band to not exceed 100mm) including plastic
emulsion paint.
PET BAFFLES: Providing and fixing of PET acoustic baffles OF SIZE 40*120*2400MM made from standard
25mm PET panels of size 2440mm x 1220mm. The centre to centre spacing can be in multiple of 25mm.
Maximum length of one baffle can be 2440mm and can be increased by joining two or more baffles.
The baffles to be installed with help of specially designed U clamps, 25mm x 25mm x 25mm GI carrier
powder coated in black. Spacing between two carrier to be 1200mm. The carrier should be supported
from true ceiling with help of 4mm threaded rods. The NRC of baffle system to be 0.5.
SUB TOTAL OF CEILING 1,24,733.60 3,82,928.63
6 DOORS/ WINDOWS
Digitally signed by AMIT
S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT
STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door Frame formed out of
45* 40mm / 50*50mm of 6063-T6 Virgin grade duly Anodized Aluminium, including 10 mm Toughened
Glass. The cost to include hardware like Door Closure, 4nos Hinges, Lever Handle with mortice lock,
Door Seal & Gaskets etc. in approved shade and design as per architectural drawings and instructions
of the architect. The size of door shall be upto 1050mm X 2400mm.
STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door Frame formed out of
45* 40mm / 50*50mm of 6063-T6 Virgin grade duly Anodized Aluminium, including 10 mm Toughened
Glass. The cost to include hardware like Door Closure, 4nos Hinges, Lever Handle with mortice lock,
Door Seal & Gaskets etc. in approved shade and design as per architectural drawings and instructions
of the architect. The size of door shall be upto 1200mm X 2400mm.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought
6.3 9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast
lugs or dash fastener shall be paid for separately).
9.1.1 Second class teak wood CUM 0.30 1,42,949.70 42,884.91
LAMINATED FLUSH DOOR- Flush Doors finished using 1mm Thick Laminate on both sides panel of size
upto 2400mm x 1000mm complete with Hardware including hinges, Door Closer, Mortice Lock with
Handle, latches etc. including cost of Door frame with melamine/ duco finish. The cost to include
providing and fixing of vision panel as per design.
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.
SUB TOTAL OF DOORS 43,979.76 6,22,757.32
7 FINISHES & MISCELLANEOUS
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per
manufacturers specifications :
Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer
applied @ 0.75 ltr /10 sqm
Providing & fixing decorative Poly décor fabric Wall Paper (on walls and ceiling) of weight 475 g
7.2 MR /sqm as per approved shade & design including prepration of surface with 2 coats of Nubin Glue SQM 12.00 4,518.28 54,219.31
based epoxy quote.
Preparation of complete set of civil and interior finishing drawings including details. A qualified
professional for the purpose shall be appointed after due appproval from Engineer In Charge.
Digitally signed by AMIT
S.No. (CIVIL) REF. DESCRIPTION UNIT QTY DSR DSR AMOUNT MARKET RATE MR AMOUNT
ZEBRA BLINDS - Providing and fixing of Blinds in band width 7.5 cm - 12 cm and made up of 100%
polyster, in width of 250 - 280 cm, weight - 160g/sqm - 190g/sqm, thickness - 0.50 mm - 0.70mm ( opaue
part ), Colorfastness to light - above 4 grade. Blind tube made of aluminium with a diameter of 36mm,
botom rail made of aluminum with powder coated having weight 390 gm/meter fitted with end caps in
colour matching to the fabric and mechanism of plastic with chain and metal bracket. The blind shall
have aluminum cover with the matching fabric designed on it. Aluminium profile should have temper
WP consisting of alloy 63400 along with anodizing of 10 micron and powder coating of 60 micron. The
tensile strength of profile should be 9.10 Kg/mm square and elongation 18.The control clutch drive unit
engineered heavy duty chain drive pulley operating system consisting of gear clutch housing and
7.4 M.R. locking plug containing minimum 6 ribs and inserted at minimum of 38mm into roller tube. Self- SQM 6.00 5,875.59 35,253.52
lubricating exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick
manual removal. It shall be driven by a ball chain pulley with ball chain and can be positioned at Right
hand or Left hand side of the shade. Clutch gear ratio of 1.75:1 for reduced operating force on larger
blinds. Mounting hardware brackets universal brackets including end plug bracket with lock down
retainer device. Brackets finish of powder coated metal installation brackets made of stamped and
hardened steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper WP.
Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm
diameter cord with plastic balls moulded to form an endless ball chain used for raising or lowering
action of the shades. All plastic components must be UV-stable - white in colour.
7.5 M.R. Supply and installation of oil on canvas painting as per the approved theme. (size - 1.8 m x 1.2m) Each 1.00 65,000.00 65,000.00
Supply and installation of logo made out of CNC cut 2 layer of 12mm thick acrylic solid surface as per
approval of engineer-in-charge. (outer envolop to be measured for payment)
FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with 15 yrs MCS
warranty as approval of the Architect. (Only film surface area shall be measured and paid).
SUB TOTAL OF FINISHES 28,086.50 3,10,553.08
Digitally signed by AMIT
Name of Work: Renovation of Reception and adjoining area of NSPCL Head Office at New Delhi
BOQ FOR FURNITURE
SR. NO. DESCRIPTION UNIT QUANTITY RATE AMOUNT
1 Reception Table
Supply and installation of reception table of overall size of upto 2400mm (L) x 900mm (D) x 1050/1200mm (H). The table
shall be made up of 18mm thick commercial board. All visible surfaces to be finished in 12mm thick bendable acrylic
solid surface and all non- visible surfaces to be finished in lominate. The table to have a 3-drawer pedestal with all NOS 1.00 3,25,000.00 3,25,000.00
hardware and fittings as approved. The cost to include making of cutouts for cables, swithplates etc. complete as per
detail design and drawing.
2 Bed (for doctor's room)
Providing and installation of in-situ customised fixed medical examination bed of size upto 750mm wide, 1800mm long
and 650mm high made out of 18mm-19mm commercial block board on all sides including top with hardwood support
frame of 50 x 50mm on all edges as per instructions of the engineer in charge. The bed to include integrated steps of
width 750mm to climb the bed. The bed shall be finished in 1 mm thick laminate on all sides complete as per the
instructions on engineer-in-charge. The cost to including providing and placing of 100mm thick matterss made using
Digitally signed by AMIT
Name of Work: Renovation of Reception and adjoining area of NSPCL Head Office at New Delhi
Summary for E & M Component
Sub Head Descriptions DSR Amounts NDSR Amounts
SH-l EI- Point Wiring, DB, Earthing, Lighting, Cable, Cable Tray, LT Panel 4,60,855.00 8,18,669.16
SH-ll HVAC- Chilled pipe, Duct, Inulation, Grill,VRF, Split ac 4,47,180.00 4,34,902.69
SH-lll FAS & PA 58,480.00 0.00
Digitally signed by AMIT
Name of Work: Renovation of Reception and adjoining area of NSPCL Head Office at New Delhi
Bill of Quantity for E & M Component
Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT
(SH-I: EI WORKS)
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable etc. as required.
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (
without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single
core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC
insulated copper conductor single core cable etc. as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
3 1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit
3.3 1.14.3 2X4sq.mm+1X4sq. mm earth wire P/Mtr 210.00 373.00 78,330.00
Supplying and fixing following modular switch/ socket on the existing modular plate & switch
box including connections but excluding modular plate etc. as required.
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for
modular switches in recess etc. as required.
Supplying and fixing following Modular base & cover plate on existing modular metal boxes
etc. as required.
Digitally signed by AMIT
Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT
Supplying and fixing modular blanking plate on the existing modular plate & switch box
excluding modular plate as required.
Fabricating, supplying & installation on surface/ recess 2.0 mm thick factory fabricated GI Sheet
raceways height 40 mm and of totally enclosed with 2 mm thick covered. Two lengths of
8 MR. raceways and junction box shall be joined together to make it dust proof. Chipping and
removing screed to install the raceways in floor, including removal and disposing of debris /
fixing in ceiling along with suspender and accessories as per instruction of Engineer in charge.
Fabricating, supplying & installation on surface/ recess 2.0 mm thick factory fabricated GI Sheet
juction boxes of height 40 mm and of totally enclosed with 2 mm thick covered. Two lengths of
9 MR. raceways and junction box shall be joined together to make it dust proof. Chipping and
removing screed to install the junction box in floor, including removal and disposing of debris /
fixing in ceiling along with suspender and accessories as per instruction of Engineer in charge.
9.1 250 mm (wide) x 300 mm (length) X 40 mm (height) Each 2.00 1,870.00 3,740.00
9.2 200 mm (wide) x 200 mm (length) X 40 mm (height) Each 2.00 1,660.00 3,320.00
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess
10 1.2 including painting in case of surface conduit, or cutting the wall and making good the same in
case of recessed conduit as required.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
11 1.21 surface/recess including cutting the wall and making good the same in case of recessed
conduit as required.
Providing and fixing in position the following pvc flexible conduits including all fixing accessories
12.1 b 25 mm dia flexible conduit with end couplers P/Mtr 50.00 45.00 2,250.00
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core
cable in the existing surface/ recessed steel/ PVC conduit as required.
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,
240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din
bar, interconnections, powder painted including earthing etc. as required. (But without
MCB/RCCB/Isolator)
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB
distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus
bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.
(But without MCB/RCCB/Isolator)
Digitally signed by AMIT
Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT
Providing and fixing following rating and breaking capacity and pole MCCB with
16 2.2 thermo magnetic release and terminal spreaders in existing cubicle panel board including
drilling holes in cubicle panel, making connections, etc. as required.
Supplying and fixing 63 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker
17 suitable for inductive load of following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
Triple pole Each 2.00 1,980.00 3,960.00
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete
with connections, testing and commissioning etc. as required.
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual
19 2.14 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual
20 2.15 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker
21 2.10 suitable for inductive load of following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
Supply, installation, testing and commissining of 15W +/-2W recessed mounted LED Circular
Down lighter luminaire with system lumen output ≥1500 lm. Luminaire shall be made up of
Pressure die cast aluminium housing with 145 mm (±5mm) dia of cutout. Luminaire shall have
Optical Grade High Efficiency Translucent Optical compartment for very high efficiency.
Luminaire should have IP rating of IP40 as protection.Optical compartment shall have Unique
HET diffuser for wider and uniform distribution. LM 80-08 compliant, ANSI rated LEDs from reputed
makes such as Nichia, Japan / Cree, USA / Bridge lux, USA / Lumiled USA / Ever light should be
provided. Luminaire shall use multiple LEDs of less than 1W Class for better diffusion and heat
management. LEDs must be driven at 70% of maximum rated current for higher reliability in all
our products. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs.
(Complete LM 80 test report for LED should be submitted). The LEDs used in luminaire should be
ANSI standard Rated LED with CCT of 4000K and CRI of 80. LEDs used must be tested as per
EN62471 for Photo Biological Safety of humans and Report of the same from LED Manufacturer
shall be submitted. Isolated type, multistage Constant Current topology driver suitable to
operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3KV surge
protection. The driver should have efficiency of ≥85% with Power factor ≥ 0.95 and ITHD of ≤ 10%
should be integral to the luminaire. Driver shall be made in India for better service and
availability. Driver output voltage shall be less than SELV limits for safe DC operation and
maintenance. LM79 Test Report from Third Party NABL Lab to be submitted in the event of order
to confirm above parameters. Dimension-159x39 mm (±5mm).
Digitally signed by AMIT
Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT
Supply, installation, testing and commissining of 20W, recessed, 1205mm linear, IP20, LED
luminaire with system efficacy of 105 lumen/watt, and system lumen output of 2100 lumen,
operating in an ambient temperature of 0⁰C to 45⁰C. Operating at 50Hz frequency, luminaire
shall have extruded aluminium housing in white with high efficiency translucence diffuser and
must have provision for end to end seamless connectivity. EMC package of wattage of 0.2-0.5
W LEDs used in the product shall comply with IEC 62471 for Photo-biological safety. LM 80-08
compliant LEDs from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul
should be provided. The LED shall comply with L70 life of 50000 burning hours tested at
maximum current. The LEDs used should be with CCT of 4000 K and CRI of Minimum 80, with
MacAdam CCT binning ≤3 . LED Driver shall be Isolated type, Constant Current topology driver
with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to
270V (nominal rated voltage – 240V) with 3KV internal surge protection, Power factor of
minimum 0.95, driver efficacy of minimum 85% and total harmonic distortion (THD) of less than or
equal to 10% should be integral to the luminaire. Manufacturer shall have inhouse lab
approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be
submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian
Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) :
2012; IS 16108 : 2012. Dimension: 1205 mm
Supply, installation, testing and commissioning of Suspended LED stretch fabric with white fabric
Luminaire with edge to edge illumination of required dimension made of extruded aluminum
housing delivering ≥2800lumen/sq m and it draws 55W/sq m maximum from standard 220-240V
AC supply. Fixture offers excellent light output, long source life, high CRI, and energy efficiency,
in a beautiful, clean plane of light. Industry-best quality of 80+ CRI and color consistency within
a 3-step MacAdam ellipse provides a glare-free direct view luminaire, and abundant, uniform
daylight illumination evenly lit across the entire task surface. Product to be supplied with
specially designed suspensions system. The diffuser shall be Special translucent stretch fabric is
100% Recyclable having good resistance properties -Flame retardant, Non-Flammable, Self
extinguishing, Anti-bacterial, Anti-Fungal and Anti-Static, Impermeable to Water and steam for
uniform and optimum light distribution. Light Reflection Properties with High gloss fabric >80% &
Light Transmission Properties Upto 77%. Fire rated to European standard B-s1-d0 according to EN
13501-1. Having acoustic properties of strecth ceiling: Reverberation time at
125/250/500/1000/2000 Herts reduces from 1.5s to 0.7s with designed perforations and
insulation.Fixture should have IP20, CCT Range – 4000K/5700/6500k, PF ≥ 0.95, THD<=10%, CRI 80
and drive should have Surge Protection upto 2KV . The LED Driver shall be easily available in
India for repair and service. The luminaire shall be with following certifications: LM79 & LM80
issued by LED manufacture along with Photo Biological Safety Standard.
Digitally signed by AMIT
Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT
Supply, Installation, Testing and Commisioning of IP20 linear suspended standalone fitting made
of extruded aluminium housing and is should have high transmissive diffuser. Fixture should have
minimum efficacy at System level (Not Chip Level) >70lumens/watt(SDCM<3) and a minimum
system lumen output of 1260 (downlight) lumens/4ft and maximum system wattage of 18W/4ft.
Fixture should have office compliance with low UGR. Luminaire should have Life of
25 50,000hrs@L70 Lumen maintenance at 45deg C ambient temperature, CCT up to 4000/5700K, rmt 35.00 11,693.00 4,09,255.00
IP20, IK02, CRI >80, PF >0.95, THD<10% at full load and an operating Voltage Range of 140 - 300V
AC, Internal Surge Protection 3KV & driver efficacy >85%. The fixture should comply with the
parameters as per IS10322. Fixture should have class I indulation. Manufacturer shall have
inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports
need to be submitted from a NABL/UL accredited lab to verify above parameters.
Supply, installation, testing and commissioning of decorative type suspended light as per
reference image and approval made out of alumunium extrusion. (length - 1.2m)
Suppling, installation, testing and commissioning of electrically operated on 220 V, 50 Hz, AC
Supply illuminated exit signage conforming to IS- 10322 for the bank premises ceiling having the
following specifications etc. complete as reqd. (Make:- Prolite Auto Glow, Model No.FASCIA-E)
a. Housing extruded aluminum alloy.
27 b. Diffuser cum message panel-CAD design prnting on 8 mm crystal acrylic sheet. Each 3.00 7,602.00 22,806.00
c. Battery-lithium ion rechargeable battery.
d. Backup time 180 minutes.
e. Charging type - constant current charger.
f. Recharging cycle - 16 to 24 Hours.
Supply, installation, testing and commissioning of LED flexistrip having minimum rating
28 9.6W/mtr, CCT 3000K/4000K, 5 mtr roll with LED Driver lumens Each 8.00 1,384.48 11,075.81
nots less than 3800, luminous efficacy not less than 80 Lumens per watt etc. complete as reqd.
Hot Dipped Galvanized Iron Cable Tray
Supplying and installing following size of perforated Hot dipped galvanized iron cable tray
(Galvanized thickness not less than 50 microns) with perforation not more than 17.5%, in
convenient sections, joined with connectors, suspended from the ceiling with
G.I. suspenders including bolts & nuts, painting suspenders etc as required.
29.1 300 mm width X 50 mm depth X 1.6 mm thickness P/Mtr. 20.00 963.00 19,260.00
(SH-II: HVAC SYSTEM)
CHILLED WATER HVAC SYSTEM
Digitally signed by AMIT
Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT
Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and
return air path as and where required of required sizes i/c control wiring, the damper shall be
motorized and spring return so as to close the damper in the event of power failure
30 30.20 automatically and open the same in case of power being restored. The spring return
action shall be inbuilt mechanism and not externally mounted. The damper shall also be
closed in the event of fire signal complete as required and as per
specifications.
Supply, installation, testing and commissioning of GI volume control duct damper
31 30.16 complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per P/Sq m 5.00 7,580.00 37,900.00
specifications.
Supplying & fixing of powder coated single slotted supply and return Air Grills with aluminium
volume control dampers.
Supply, installation, balancing and commissioning of factory fabricated GSS sheet
metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter
dampers, vanes, hangers, supports etc. as per approved drawings
and specifications of following sheet thickness complete as required.
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish
closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable
34 30.23 adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick
self adhesive nitrile rubber tape insulation
complete as per specifications and as required.
VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)
Supply and Installation of pressure independent rectangular VAV unit with integral sound
attenuator made of 22G GI sheet casing length suitable length consisting of 25mm thick
48kg/m3 density fiber glass wool covered with tissue paper ,elliptical volume control damper
,calibrated differential pressure sensor (DPT sensors) at inlet complete with digital
Thermostat,temprature control feature including motorized damper and actuator .(All VAV shall
be factory calibrated).
(SH-III: FAS & PA )
Supplying, installation, testing & commissioning of intelligent analog addressable photo
thermal detector complete with mounting base complete as required.
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed
37 28.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath P/Mtr. 80.00 192.00 15,360.00
complete as required.
Public Address System 0.00
Digitally signed by AMIT
Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT
Supplying, installation, testing & commissioning of 1.5/3/6W recess mount ceiling/wall
speakers complete as required.
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in
39 28.5.3 the existing surface / recessed steel conduit of following pairs, cores and size
including connections and interconnections etc. as required.
28.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm Each 80.00 61.00 4,880.00
Total of SH-III:- 58,480.00 0.00
SH-IV: LAN NETWORKING)
Passive Network System
Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be
of 1U height with clear label holders and white label with the panel. 24 Ports Cat-6 Patch Panel
should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc.
complete as required.
Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO) with
face plate of color as per site requirement, should have ETL/UL verification program certificate
for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same
OEM to maintain compatibility and interoperability etc. complete as required.
Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair
Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be
complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard.
Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -
5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc.
complete as required.
Supplying, Installation, Testing and commissioning of
following CAT6 Patch Cord should have ETL/UL
verification program certificate for compliance with
ANSI/TIA-568.2-D etc. complete as required.
43 39.12.1 Copper Patch Cords of length 1m (3ft) Each 10.00 151.00 1,510.00
43 39.12.2 Copper Patch Cords of length 3m (10ft) Each 10.00 227.00 2,270.00
Supplying and drawing following core Fiber Optic Cable having corrugated steel armoring. The
Fiber should be SM Fiber Central -loose tube filled with Thixotropic jelly, duly following Standards:
ISO 11801, IEC 60793-1/60794-1-2, ITU-T-REC G.652D and Telecordia GR-20-core, High quality
Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating
ambient Temperature should be – 5 0C to +50 0C and Storage Temperature shall be – 5 0C to
44 39 +50 0C, Max Attenuation ± 0.36 (db / km) at Operational Wavelength 1310 nm and ± 0.22 db /
km at Operational Wavelength 1550 nm. type of fiber should be 9/125 / G.652D & Refractive
Index should be 1.4670/1.4675. The value for Mode-filed, Cladding Diameter 9.2 ± 0.4 μm and
125 ± 0.7 μm correspondingly. The Dispersion value < 3.5 < 18 ps/nm-km and PMD value < 0.2
ps/km and Cable Cutoff wavelength < 1260 nm i/c splicing & marking etc complete as
39.19.1 Single Mode 6 Core Optical fiber cable Mtrs. 100.00 64.00 6,400.00
Digitally signed by AMIT
Sr. No. DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT
Supplying and fixing of following sizes of medium class PVC conduit along with
accessories in surface/recess including cutting the wall and making good the same
in case of recessed conduit
Total of SH-IV:- 72,942.00 0.00
Grand Total (SH-I to SH-IV):- 10,39,457.00 12,53,571.85
Grand Total (SH-I to SH-IV):- 10,39,457.00 12,53,571.85
Digitally signed by AMIT
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT NSPCL.pdf
Tender Document
BoQ NSPCL.pdf
Tender Document
SCC NSPCL.pdf
Tender Document
List of Make.pdf
Tender Document
Forms.pdf
Tender Document
Instruction to Bidder for online Bid Submission.pdf
Tender Document
TECHNICAL Circular upto 27 amendment latest.pdf
Tender Document
GCC PMC 2022 Amendment 16.pdf
Tender Document
Download all tender documents and submit your bid