Construction of 50 Bed Sudhaar Ghar Bhalukpong, West Kameng District, A.P.

Amount

SH :- Site Development

Excavation in Soil with Dozer with lead upto 100 metres ( Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.)

Excavation in Ordinary Rock with Dozer with lead upto 100 metres (Excavation for roadway in ordinary rock by deploying a dozer, 80 HP including cutting and pushing the cut earth to site of embankment upto a distance of 100 metres ( average lead 50 metres ), trimming bottom and side slopes in accordance with the requirements of lines, grades and cross sections.)

SH :- Main Building (Ward & Office Building)

Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.

Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Dry Rubble Flooring

Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.

Providing and laying cement concrete 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. b)1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size)..

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size).

Reinforced cement concrete work Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band above plinth level upto 1st floor level.(Without using admixture, plasticiser) (c) M25 grade concrete

Reinforcement of RCC work including bending, binding and placing in position complete.a) Cold twisted bars.

Centring and shuttering including strutting, propping etc and removal of form work for : a) Walls including attached buttresses, pilasters etc.

b) Foundation, footings, bases of columns etc. and mass concrete.

c) Column, Pillars and Struts.

d) Lintels, beams, girders, bressumers and cantilevers etc.

e) Suspended floors, roofs, landings shelves and their supports balconies and chajjas (3.5m height).

f) Stairs (excluding landings) except spiral stair cases.

Providing and laying damp proof course 38 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5 mm nominal size).

Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 cement : 6 fine sand).

Half brick masonry (with best available local bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) in foundation and plinth.

Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.

Supplying and installing uPVC- Casement Door made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multi chambered with corners fusion , Single leaf Side hung Door using uPVC section of size 58mm x 69mm x 2.4mm thick wall for frame, 58mm x 109mm x 2.4mm thick wall for glass sash,Aluminium threshold at bottom. (ii) Using 5mm clear toughened glass

Double leaf Side hung Door with a Dummy Mullion - French Door using uPVC section of size 58mm x 69mm x 2.4mm thick wall for frame, 58mm x 109mm x 2.4mm thick wall for glass sash, 58mm x 61mm x 2.4mm thick wall for dummy mullion, Aluminium threshold at bottom.(i) Using 5mm clear glass

Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multi chambered sections of wall thickness 2.4mm with corners fusion , (ii) 4-Panel with 5mm clear float glass

Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. a) 300 x 16 mm

Providing and fixing aluminum tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. a) 250x10 mm

Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete. a) 100 mm

Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) ornamental Grill.

12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. - Skirting-Size of Tile 1000x1000 mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (a) Granite stone slab of colour black, Cherry/Ruby red 18 mm thick (slab area upto 0.50 sqm)

Chequered terrazzo tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25 mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete: a) Light shades using white cement

Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.

Applying two or more coats of JK or Birla or equivalent wall putty over cement mortar to give an even and smooth wall surface complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade on new work ( two or more coats )

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).

Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete.

Providing and fixing soil,waste and vent pipes.

Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design.

SH :-Sanitary Installation & Water Supply

Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.

Dry Rubble Flooring

Providing and laying of cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).

Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in : a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).stone aggregate 20 mm nominal size)

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforcement of RCC work including bending, binding and placing in position complete.a) Cold twisted bars

Centering and shuttering including strutting, propping etc. and removal of form work for: a) a) Suspended floors, roofs, landing shelve and theirsupports, balconies and chajjas (3.50m height)a) Suspended floors, roofs, landing shelve and theirsupports, balconies and chajjas (3.50m height)

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

12 mm thick cement plaster 1:3( 1 cement : 3 fine sand)

Neat cement punning

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. a) 40mm thick.

Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.

Providing and fixing GI pipes complete with GI fitting s including trenching and refilling etc (external work). b) 20 mm nominal outer dia .Pipes.

Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal 15 mm nominal outer dia .Pipes.

Constructing brick masonry manhole with 2nd class bricks in cement mortar 1: 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 :8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.

Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15mm CP brass pillartap sand CPbrasschain with rubber plug 32mm CPbrass waste of standard pattern,32mmdia CPbrass trap and MIunions complete,including cutting and making good the walls where required.a)Flat back wash basin size 550x400 mm with a pairof 15 mm CP brass pillart aps of heavy quality.

Providing and fixing brass bib cock of approved quality. 15mm

Providing and fixing brass stop cock of approved quality.15mm

Providing and fixing PVC connection pipe with brass union 30cm length.

Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.

Providing and fixing white vitreous china flat back or wall comer type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with Cl automatic flushing cistern with fittings, RS or Cl brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required.

Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. (a) 100mm dia

(b) 50mm dia

Providing and fixing sand cast iron heel rest sanitary bend. (a) 100 mm dia

Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. a) 100 x100x100 mm

SH :- Kitchen & Dining Hall.

Dry Rubble Flooring

Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.

Reinforced cement concrete work Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band above plinth level upto 1st floor level.(Without using admixture, plasticiser) (c) M25 grade concrete

Reinforcement of RCC work including bending, binding and placing in position complete. a) Mild steel.

Centring and shuttering including strutting, propping etc and removal of form work for : a ) Vertical and horizontal fins individually or forming box louvers bands and facias.

Supplying and installing uPVC- Casement Door made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multi chambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, locking arrangement, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. a) Single leaf Side hung Door using uPVC section of size 58mm x 69mm x 2.4mm thick wall for frame, 58mm x 109mm x 2.4mm thick wall for glass sash,Aluminium threshold at bottom. (ii) Using 5mm clear toughened glass

Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multi chambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminium sliding track,stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. with 5mm clear glass complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside /outside of Dow Corning /GE or equivalent. a) 2 Track Sliding Window with Fly screen (WINSTA KOMMERLING/ FINESTA/ ENCRAFT) using uPVC section of sizes 88mm x 50 mm 2.4mm thick wall for frame with inbuilt fly screen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for fly screen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel (ii) 4-Panel with 5mm clear float glass

Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or

Providing and fixing aluminum tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete.

Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete. A) 100 mm

Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. b) Ornamental grill.

12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).

Providing and laying vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting,riser of steps,over12mm thick bed of cement mortar1:3 (1cement:3coarsesand), including grouting the joint with white cement & matching pigments etc. complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. - Skirting-Size of Tile 1000x1000 mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (a) Granite stone slab of colour black, Cherry/Ruby red 18 mm thick (slab area upto 0.50 sqm)

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work complete.

Painting one or more coats with superior quality ready mixed paint for steel work of approved brand and manufacture in all shades on newwork to give an even shade.

Applying two or more coats of JK or Birla or equivalent wall putty over cement mortar to give an even and smooth wall surface complete.

Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.

Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete.

Providing and fixing soil,waste and vent pipes.

Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design.

SH :- Sanitary Installation & Water Supply

Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.

Dry Rubble Flooring

Providing and laying of cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) 1 : 1.5 : 3 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).

Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in : a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).stone aggregate 20 mm nominal size)

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforcement of RCC work including bending, binding and placing in position complete.a) Cold twisted bars

Centering and shuttering including strutting, propping etc. and removal of form work for: a) Suspended floors, roofs, landing shelve and theirsupports, balconies and chajjas (3.50m height)

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

12 mm thick cement plaster 1:3( 1 cement : 3 fine sand)

Neat cement punning

Constructing brick masonry manhole with 2nd class bricks in cement mortar 1: 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 :8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.

Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.

Providing and fixing GI pipes complete with GI fitting s including trenching and refilling etc (external work). b) 20 mm nominal outer dia .Pipes.

Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal 15 mm nominal outer dia .Pipes.

Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15mm CP brass pillartap sand CPbrasschain with rubber plug 32mm CPbrass waste of standard pattern,32mmdia CPbrass trap and MIunions complete,including cutting and making good the walls where required.a)Flat back wash basin size 550x400 mm with a pairof 15 mm CP brass pillart aps of heavy quality.

Providing and fixing brass bib cock of approved quality.15mm

Providing and fixing brass stop cock of approved quality.15mm

Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length.

Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.

Providing and fixing 12.50 litres high level CI flushing cistern of approved make with integral fittings such as ball valve, bell, lever, GI chain and pull complete.

Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. (a) 100mm dia

(b) 50mm dia

Providing and fixing sand cast iron heel rest sanitary bend.

Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. a) 100 x100x100 mm

SH :- Internal Electrification

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm a) 'Group "A"

Group "B"

Group "C"

Wiring for twin control light point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way Piano type switch, phenolic laminated sheet, suitable size M.S.box and earthing the point with 1.5 mm² FR PVC insulated copper conductor single core cable etc as required

Wiring for light / power plug with 2x4 sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No 4 mm² FR PVC insulated copper conductor single core cable for loop earthing as required

Wiring for circuit /sub-main wiring alongwith earth wire with the following sizes a) 2 x 2.5 mm² + 1 x 2.5 mm² earth wire

2 x 4.0 mm² + 1 x 4.0 mm² earth wire

4 x 25.0 mm² + 2 x 16.0 mm² earth wire

Supplying and fixing of following sizes of PVC conduit along with accessories a) 32 mm

Supplying and fixing metal box of following sizes (nominal size) on surface a) 150 mm x 75 mm x 60 mm deep

150 mm x 150 mm x 60 mm deep

Supplying and fixing following piano type switch/socket on the existing switch box / cover including connections etc as required a) 5/6 Amp Switch

b) 3 pin 5/6 amp socket outlet

c) Telephone socket outlet

d) TV antenna socket outlet

e) Internet Outlet

Supplying and fixing of Ceiling rose on the existing junction box/wooden block including connection etc as required

Supplying and fixing of brass batten / angle holder including connection etc as required

Erectin of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc as required

Providing and fixing plain 16/0.20 mm twin twisted, flexible, FR PVC insulated,copper cable, in polythene sleeve, or conduit of suitable size on the floor/wall,or side of the table / door etc as required

Providing and fixing plain 16/0.20 mm twin, FR PVC insulated, PVC sheathed,flat flexible copper cable on the floor / wall, or side of the table / door etc as required

Installation, testing and commissioning of pre-wired, fluorescent fitting of all types, complete with all accessories and tube etc directly on ceiling / wall,including connection with 1.5 mm² FR PVC insulated, copper conductor,single core cable and earthing etc as required

Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc.as required

Extra for fixing the louvers / shutters complete with frame for a exhaust fan of all sizes

Supplying of 4'-40 watt Decorative single box type tube fitting with all accessories as required

Supplying of 2' - 20 watt Single Box type flourescent tube fitting complete as required

Supplying of exhaust fan of 300/380 mm sweep

Supplying of ceiling fan fan of 1200 mm sweep

Supplying and fixing of Ding Dong call bell and bell push suitable for 230 V AC supply with all accessories etc. as required.

Supplying & fixing of 4'-40' watt flourescent tube.

Providing 15A, five in one switch socket combined.

Suppying of 18 SWG PVC insulated Copper earthing wire

Supplying of Al. Thimble of following sizes :- a) 35 sqmm

b) 95 sqmm

Drill Bit of size 1/2"

Supplying of Machine Screw of sizes:- a) 1x1/2"

Supplying of Machine Screw with Nut of size 2" length

Supplying of white coloured brass washer

Supplying of Nuts & Bolts of 1" length

SSH :- CONTROL PANEL AND SUB-MAINS

Supply and fixing 5A to 32A G Series MCB : Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'G' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required :- a) Single pole 32 Amp MCB

Single pole 20 Amp MCB

Single pole 16 Amp MCB

Supply and fixing 40 Amp SPN Main switch

12 Way TPN MCB DB with 63 Amp TPN isolator & 10/16 Amp miniature circuit breaker

Supplying of 3½ core x 35 sqmm UG cable

Supplying, installation, testing and commissioning of surface/recess mounting, vertical type, compartmen-talised, 415 volts TPN MCB distribution board of sheet steel, 1.6mm thick dust protected, duly phosphatized and painted, inclusive of 200 amps tinned. a) 8 way

EARTHING Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Extra for using salt and coke for GI or copper plate earth electrode as required

Supplying and laying 25mm x 5mm G.I.strip at 0.5 metre below ground as strip earth electrode, including soldering etc. as required

Providing and fixing 25mm x 5mm G.I.strip in 40mm dia G.I. pipe from earth electrode, as required

Providing and fixing 25mm x 5mm G.I. strip on surface or in recess for connections etc as require

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required

Supplying & fixing of lightning conductor on the roof of the building

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing alongwith existing surface / recessed conduit / submain wiring / cable as required

Providing and fixing 25mm x 5mm copper strip on surface or in recess for connections etc as required

M/s Tenzin Enterprises (BID ID -8256)