REPAIRS AND MAINT OF FENCING AT CERTAIN LOC AT AEC TRG COLLEGE AND CENTRE, PACHMARHI.

Amount

Dismantling of posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good distrurbed ground in concrete complete.

Dismantling of fencing wire mesh, any type complete.

Excavating in hard/ dense soil in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance n. exc 50m and making good surface.

S&F MS steel for hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Preparing new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (20mm aggregate) as in bed blocks incl necessary form work complete all as specified and directed.

S&F chain link MS galvanised fencing, 4mm dia wire and size of mesh 100x100mm x 3.15mm including line wires to any type of standered rails, straining bolts, nut & bolt for angle iron post MS tie bars incl provisioning of binding wire etc completeof any size or type complete all as specified.

S&F wind ties format including securing bolts posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessay drilling bolting or riveting etc, and similar work confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L mild steel round bar 10mm dia and over as in tightening of chain link fencing including cutting to shape, necessary drilling, bolting etc Fe-410-W (Gde E-250) quality -A or Fe 290 (Gde-E-165) complete all as specicifed and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling mass complete all as specified & directed.

Demolition of brick work and stone/ boulder masonary built in cement mortar and lime mortar. Including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for modular Brick work with sub class `B` bricks (modular bricks) straight or curved on plan exc 6 m mean radius built in cement mortar( 1:4) complete all as specified and driected.

M&L for precast cement concrete (1:2:4) type B0 (12.5mm graded stone aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be mearued separately) set in CM 1:4 all as specified and directed.

M&L rendering 10mm thick on brick wall or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified and directed.

M&L rendering 10mm thick on other than fair face of brickwork or concrete surfaces in cement mortar 1:4 complete all as specified

M&L for applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed.

DEEPAK JAISWAL

MODI CORPORATION

GHASI RAM SAHU