Construction of toilet at Camp office Silviculture Kalatang

Amount

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) inluding dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and lift upto 1.5m

Providing and laying in position cement concrete of specified grade excluding the cost of centring & shuttering - All work upto plinth level 1:4:8 (1cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level with Thermo- Mechanically treated bars footing jali with 10mm dia bars @ 100mm c/c Column: main bars12mm dia 04 Nos & stirrups 10mm dia bars @ 150mm c/c Plinth beams: Main bars 12mm dia bars 4 Nos , & lateral ties 10mm dia bars @ 150mm c/c Beams: Main bars 12mm dia bars @50mm c/c 4 Nos , & lateral ties 10mm dia bars @ 100mm c/c Slab: Main bars 10mm dia bars @ 100mm c/c

Centering & shuttering including strutting, propping etc and removal of form for: foundations, footings, bases of columns, footing, pedestal, short column, Lintels, beams, plinth beams, girders, bressumers cantilevers, plinth beam, tie beam, slab, Columns, pillars, piers, abutments, posts and struts etc for mass concrete

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level 1:1 .5: 3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) Foundation, pedestal and short column

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement of plinth beam 1:2:4((1 cement : 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring shuttering, finishing and reinforcement with 1:1 1/2 :3 (1 cement : 1 1/2 coarse sand: 3 graded stone aggregate 20 mm nominal size) for column

Reinforced cement concrete work in beams, suspended floors having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for beams and slab

Providing and fixing up to floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering shuttering complete with lintels of 1 :1 1/2 :3 (1 cement : 1 1/2 coarse sand (zone III): 3 graded aggregate 20 mm nominal size)

Plastering with 12 mm cement plaster of mix: 1:4 (1 cement : 4 fine sand)

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: two or more coats on new work

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer

Cement concrete flooring 1:2:4 (1cement :2coarse send:4 graded stone aggregate)finished with a floating coat of neat cement,including cement slurry,but excluding the cost of nosing of steps etc.complete 40 mm thick with 20mm nominal sze stone aggregate

Providing and fixing factory made P.V.C door frame of size 50x47mm with a wall thickness of 5mm ,made out of extruded 5mm rigid PVC foam sheet ,mitred at corners and joined with 2 nos of 150mm long brackets of 15x15mm M.S square tube ,the vertical door frame profiles to be reinforced with 19x19mm M.S square tube of 19 gauge EPDM rubber gasket weather seal to be providing through out the frame.The door frame to be fixed to the wall using M.S screws 65/100mm size complete

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm for styles and 15x15mm for top & bottom rail.M.S frame shall have a coat of steel primers of approved make and munufacture M.S frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness ,70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on both side forming styles ;and 5mm thick ,95mm wide the pvc sheet out of which 75mm shall be flat and 20mm shall be tapered in mm shall be taper45 degree on the inner side to form top and bottom rail and 115mm wide PVCsheet out of which 75mm shall be flat and 20mm shall be trpered on both side to form lock rail. Top bottom ad lock rails shall be provided both side of the panel.10mm(5mmx2)thick,20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S frame welded /sealed (30 mm thick pre laminated PVC door shutters)

Providing wood work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position with whole fast lugs or with dash fasteners of required dia and length Category IIA

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked MS pressed butt hinghes bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete kiln seasoned and chemically treated hollock wood 35mm thick shutters (ventilator)

Providing and laying vetrified floor tiles in different size (thickness to be specified by the manufacturer ) with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement and matching pigments etc. ,complete.size of tile 600x600mm

Providing and fixing panelling or panelling and glazing in panelled or panelled or glazed shutters for doors, windows and clerestory windows, (Area of opening for panel inserts excluding portions inside grooves or rebates to be measured) Panelling for panelled or panelled or glazed shutters 25mm to 40mm thick: float glass panes, 4mm thick glass pane (weight not less than 10 kg per sqm)

Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 15622 (thickness to be specified by the manufacturer )of approved make in all colour, shades except burgundy ,bottle green ,black of any size in skirting B30, risers of steps and dados over 12mm thick bed of cement mortar 1:3(1 cement:3 coarse sand) and jointing with grey cement slurry @3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing P.V.C waste pipe for WC fitting upto septic tank 100mm dia

Providing and fixing P.V.C waste pipe 50mm dia

Providing and fixing on wall face unplastisized - PVC moulded fittings/accessories for unplastisized rigid PVC rain water pipes conforming to IS 13592 type A, including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion Single TEE with door(110x110x110mm)

Bend 87.50 75mm bend

110 mm bend

Providing and fixing chlorinated polyvinyl chloride (CPVC)pipes ,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing .this includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete. internal work Exposed on wall. 15 mm nominal outer dia pipes

Providing and fixing (Chlorinated Polyvinyl Chloride Pipes(CPVC) ,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling and testing of joints complete. External work 20 mm dia nominal outer dia pipes

Providing and fixing wash basin with C.I. brackets, 15mm C.P brass pillars taps, 32mm C.P Brass waste of standard pattern including painting of fittings and brackets, cutting and making good the wall wherever require: White vitreous china wash basin size 630 x 450mm with a pair of 15mm C.P brass pillars taps.

Providing and fixing water closet squatting pan(Indian type WC pan) with 100mm sand cast iron P or S trap, 10ltr low level white PVC flushing cistern, including flush pipe, with manually controlled devise (handle lever) confirming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: white vitreous china orissa pattern W.C pan of size 580x440 mm with integral type foot rests.

Providing and fixing brass bib cock of approved quality 15mm nominal bore

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing: rectangular shape 453 x 357 mm

K S CONSTRUCTION

Shri V R Subramani

P GANGA RAJU AND BROTHERS

AKASH MONDAL