PROVN OF ONE TOILET AT MT AREA OF 42 ARTY DIV PRO UNIT AND CERTAIN SANCTIONED WORKS AT ITARANA CANTT AND CITY AREA UNDER GE ALWAR

Amount

S&F Stainless Steel drapery rod of 25 mm inner dia (in length as directed ) of approved colour with & including decorative bowel at both ends and pair of powder coated SS brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c all as specified and directed

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F rotational moulded polyethylene water storage tanks (white colour) (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position incl all necessary fittings (nipple, socket, union etc) complete all as specified in SSR Part I with and including 20mm bore float valve with rod and ball complete all as specified and directed.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F vitreous china squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed

S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified & directed

S&F urinal spreader of PTMT of any colour of fixing with 15mm dia (minimum weight 60 gms) complete all as specified & directed

S&F urinal spreader of PTMT of any colour of fixing with 15mm dia (minimum weight 60 gms) complete all as specified & directed

S&F grating doom 100mm dia of PTMT (minimum weight 25 gms) fixed with cement complete all as specified & directed

S&F vitreous china wash basin 'Flat back', white of size 550 mm x 400 mm with padestal stand including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed all as specified and directed.

S&F PVC flushing cistern low level 10 ltr capacity with inlet ball valve float and handle syphonic action type including brackets and flush pipe of polythene of low or high density complete all as specified and directed.

S&F PVC connection of 15mm bore with 2 Nos. PTMT nuts, 450mm long fixed with adapter and washers at both the ends complete all as specified and as directed

S&F 15mm dia bore cast copper alloy chromium plated fancy type pillar tap with out cold & hot water complete all specified and as directed .

S&F PVC (SWR) pipes of 75 mm bore single socketed in any length with rubber ring joints laid in floors/fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm bore single socketed in any length with rubber ring joints laid in floors/fixed to wall complete all as specified and directed.

S&F 15mm dia bib tap, long body, cast coper alloy chromium plated, fancy type crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified & as directed. Make : JAQUAR Cat part No OPP-15037PM or equivalent of HINDWARE/CERA

S&F 15mm dia Stop valves/angle cock, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F shower rose (fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed

M&L rendering 10mm thick in CM (1:6) on other than fair faces of brick/stone masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L 15 mm thick rendering on fair faces of brick/stone masonary in CM (1:4) mixed with integral water proofing compound finished with even and smooth complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately under relevant item of this schedule.

M&L rendering 5mm thick in CM (1:3) on concrete surfaces in ceiling, soffits and the likes; finished even & smooth without using extra cement complete all as specified.

M&L flush pointing in CM (1:4) to random rubble masonry, uncoursed or brought upto courses complete all as specified and directed.

M&L preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed

M&L preparing newly plastered surfaces of ceilings/soffits and the likes; and applying three coats of white wash complete all as specified and directed

M&L preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed

M&L preparing newly plastered surfaces & applying two coats of oil emulsion distemper (OBD) over with and including 1mm thick wall care putty complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 25mm thick PCC (1:2:4), type B-0 (using 12.50mm graded stone aggregate) as in floors, levelling course etc complete all as specified and directed

M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L 18-20mm thick machine cut kota stone as in floors etc, laid and jointed in neat cement slurry and mixed with pigment to mathc the shade of stone including rubbing, polishing and laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L 18-20mm thick machine cut kota stone as in steps, risers, dado, skirting etc, laid and jointed in neat cement slurry and mixed with pigment to mathc the shade of stone including rubbing, polishing and laid over with and including 10mm thick rendering in CM (1:4) complete all as specified.

M&L 20mm thick Granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including required cutting to suit the size of oval type wash hand basin with and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L 50 mm thick PCC(1:3:6), Type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even, path laid in panel surface finished even and fair using extra cement and joints of panel shall be filled by bitumenous primer complete all as specified & directed.

M&L glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7 mm thick laid over with and including 10 mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified & directed.

M&L 75 mm thick PCC (1:4:8), Type D-2 (using 40 mm graded stone aggregate) as in sub base of floor/pavings complete all as specified and directed.

M&L 40 mm thick PCC (1:2:4), Type B-1 (using 20 mm graded stone aggregate) as in floors complete all as specified and directed.

M&L PCC (1:4:8), Type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed

M&L moorum/red bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified & directed

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour wood grain PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made, moulded PVC door shutter 28-30mm thick (style) with 2,4,or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2 mm plain colour prelaminated PVC sheet on the back face, supplying & fixing in frame at site as per specification & drawing complete all as specified & directed

S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with and including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (3 Nos), suitable handle (2 No.) complete all as specified & as directed

S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed.

S&F powder coated anodised aluminium grill of any colour and pattern as approved for windows/ ventilators/doors complete all as specified and directed.

S&F anodised aluminium alloy sliding door bolt with hasp,staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed all as specified.

S&F 150 mm long extruded section, anodised aluminium alloy barrel tower bolts and fixed complete all as specified & directed

S&F 150 mm long extruded section, anodised aluminium alloy handles, fabricated type and fixed complete all as specified & directed

S&F mild steel butt hinges medium weight cold rolled of size 100mm, ISI marked complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F sheet glass, ordinary quality 5.00 mm thick fixed with rubber beading and clips size of glass n.exc 0.5 Sqm in each pane complete all as spd & directed.

S&F sheet glass, ordinary quality 4.80 mm thick fixed with rubber beading and clips size of glass exc 0.5 Sqm in each pane complete all as spd & directed.

M&L 15mm thick screed bed on fair faces of concrete/brick surfaces in CM (1:4) with water proofing compound @ 3% by weight of cement even and smooth in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane finished complete all as specified Note : Water proofing compound shall be measured and paid separately here-in-after.

Preparation of roof top surface, providing and applying heat reflective UV stabilised single component smart care damp proof ultra, fibre reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibre and having SRI of 106 on top of concrete roof surface in three coats including self primer at ratio of damp proof and water 3:1 and coverages @ 1Ltr/10 Sqm with a thickness of 650 micron complete all as specified and directed. Note : 6 Hours interval between two coats will be maintained and the work will be carried out through company applicator duly get approved from accepting officer in writing before incorporation and paid only after receiving the warranty certificate from the manufacturer. Make : Dr Fixit, Asian paints approved by GE

Supply only Integral water proofing compound complete all as specified and directed.

M&L precast PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in window cill, lintels, chajjas, bressumers, steps, including placing necessary formwork and set in CM (1:4) complete all as specified and directed.

Excavating in post holes (or similar) each n.exc 0.50 Cum and getting outin soft/loose soil with and including returning, filling in, ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick complete all as specified and directed.

Excavation in trenches n.exc. 1.5 Mtr wide and n.exc. 1.5 Mtr in depth for foundation and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material, n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius half brick thick wall built in CM(1:4) complete all as specified and as directed

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in CM (1:4) complete all as specified & as directed.

M&L removing of lime mortar from and cleaning stones, obtained from masonry of any description (except ashlar facings and dressed stone work) and stone sets from pavings; stacking for measurement including all extra handling and removal and disposing off rubish complete all as specified & as directed.

All as per item No 68.00 above but using old retrieved stone obtained from demolition under item No 43.00 here-in-before.

Extra over stone walling for hammer dressed to face stones and dressing of face beds and joints as specified for random rubble masonry uncoursed or brought to course with maximum depression on face from straight edge held against the depressed surface on lime or sand stone not exc 20mm for rock faced complete all as specified and directed.

M&L mild steel (TMT bar)10mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for hooping for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia.

M&L mild steel (TMT bar) 5mm to 10mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for hooping for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia as in stirrups, spacers, binders etc.

M&L PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in coping complete all as specified and as directed

M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in bed blocks, cills, coping, steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm height kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating and making grooves for fixing manhole covers complete all as specified and as directed

M&L PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in bed blocks, coping, including weathering, slightly rounded or chemfered angle and throating and making grooves for fixing manhole covers complete all as specified and as directed

M&L cutting into existing manholes / Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150mm bore pipe.

S&F PVC (SWR) floor trap, plain with CP grating including joining with solvent cement 75 mm dia.

S&F PVC (SWR) bend 110mm bore of any radius

S&F PVC (SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 110 mm bore with access door

S&F PVC (SWR) vent cowl 75 mm dia

M&L treating the backfil in contact with foundation at the rate of 7.5ltr/sqm (ATT) emulsion of surface area complete all as specified and as directed.

M&L treating the top surface of filled earth at the rate 5 ltr/sqm emulsion (ATT) of surface area complete all as specified and as directed.

M&L treating the soil under plinth protection at the rate of 5 Ltr/Sqm emulsiom (ATT) of surface area complete all as specified and as directed.

M&L Hardcore of gauge (broken stones) n.exc 63mm deposited spread levelled in layers n.exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L 150mm bore reinforced concrete pipe, class NP2, laid and jointed in CM (1:1) complete with collars including demolition and breaking up old existing pipe all as specified & as directed.

M&L 50mm thick sand stone slabs as in roof slabs, sunshades, chajjas, shelves, cills, landings, cover stones, tamplates etc n.exc 3 mtr in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM (1:4) complete all as specified and directed.

M&L False ceiling with ArmGyp-FB ceiling tiles of 595mm x595mm, 7mm thick (as approved by GE) fixed with and including galvanised iron powder coated inverted "T" or "L" section (concealed GI frame work) of mettalic or equivalent suspended from ceiling with provision of galvanised wire 4 mm dia and wall taping screw including butterfly clip, hold down clips for fixing the board to frame complete all as per manufacurer's instructions all as directed and specified. (a) size of main tee 39 x 24.4 x 0.8 mm (b) size of wall angle 22.2 x 22.2 x 0.65 mm (c) size of grid 0.61 x 0.61 mm complete all as directed and specified.

Dismantling posts or struts (wood, steel or RCC) embedded in concrete, brick work, masonry etc in any position, any section including taking out embedded portion and making good disturbed ground complete all as specified and directed.

S&F mild steel joist angle channel or tee sections and fix independently in concrete as fencing posts and similar work confirming to Fe-410 or Fe-310-0 complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (Each line wire to be measured) complete all as specified & directed.

S&F galvanised steel punched tape concertina coil of 600mm dia (dia of coil when unstretched) and length of each coil 6 to 7 mtr after stretching and fixed to angle iron posts/struts with 3.15 mm dia GI wire complete all as specified & directed.

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light/fan point controlled by one way switch all as specified & directed.

All as per serial item No. 94.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts

S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.

S&F invertor rechargeable LED batten tube light along with fixture, 2 feet long, 1 x 10 watt AC, energy saving, back up upto 4 hours, powerful lithium battery 5600 mah, long battery life 500(+) recharge cycle charging time 8-10 hours including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Halonix, Havells, Phillips, Wipro

S&F LED type street-DRACO SERIES light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed. Make: C&S Cat Part no. LTESS20WLED or equvalent Crompton Greaves /Wipro

S&F street light bracket made to shape at required angle made out of 32 mm dia (light grade) /suitable size for fitting of security light GI tubing of length not less than 1.0 mtr long suitable for fixing / holdig street light fittings including mild steel flat iron 32mm x 3mm clamp 02 Nos, with bolts, nuts, and washers complete all as specified and directed.

S&F sheet metal enclosures single door type suitable for fixing MCB's, SPN with rated bus bar, 2 way, 415 Volts.

S&F MCB 40 Amp, single pole & neutral, 230 Volt complete all as specified & directed.

S&F MCB 5-32 Amp, single pole 230 Volt complete all as specified & directed.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 10 Sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid separately under relevant items.

M&L brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

S&F exhaust fan AC single phase 230/240 Volts of size 300 mm sweep with louver with and including cutting holes in brick/stone wall of required size carefully and making good the disturbed surfaces to match with the existing in CM (1:3) complete all as specified and directed.

S&F 25mm bore GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittings laid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion to match with the existing complete all as specified and directed. Note :-Excavation and earth work will be measured and paid separately under relevant items.

S&F sub main wiring on and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990. (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)

M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

M/s Laxmi Enterprises (BID ID -3166955)

Ex Serviceman Enterprises (BID ID -3167400)

M/S GAURI CONSTRUCTION (BID ID -3165053)

shiva construction (BID ID -3166821)

M/s S Amarjit Singh (BID ID -3165774)

AARSINFRATECH (BID ID -3167465)