Certain Repair to Fencing, Security Wall at Dalhousie

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

S & F in Repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., as directed (each line wire to be measured)

Restraining & resecuring existing barbed wire of any type incl making good staples etc any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured) complete all as specified.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum , getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layer n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 mtr and making good surfaces in soft/loose soil.

M&L for cement concrete type C-2 1:3:6 (Using 40mm graded crushed stone aggt) in foundation filling and mass concrete.

Mild steel work as post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc; and similar works conforming to Fe-290 Gde E-165 complete all as specified.

M&L Preparation of new steel surfacesurfaces of any description, otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) over a coat of pink primer.

Demolition of brickwork or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stonework and precast concrete articles etc.

Demolition of cement conc.(unreinforced) as in ground floors and paving not exc 15 cm thick below or above ground level including removal of demolished material to a distance exc. 50 mtr all as directed.

Material and labour 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in sub base and surface finished even and fair with out using extra cement all as specified and as directed.

Material and labour for coloured chequered cement concrete tiles (Vibrator made) 30cmx30cmx25mm thick with grey cement and no pigment, set, jointed and pointed in neat cement slurry as in floors over 15 mm thick screed bedding layers in cement mortar 1:4.

Material and labour machine cut kota stone slab flooring 20-25 mm thick including laid over 15 mm thick screed bed in CM 1:4 with grey cement slurry mixed with pigment to match the surfaces and shade including white marbal border line of 75 mm wide including rubbing and polishing complete all as specified and as direc

Material and labour machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar including laid over 15 mm thick backing layer in CM 1:4 with grey cement slurry mixed with pigment to match the surfaces and shade including rubbing and polishing complete all as specified and as direc

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 metre mean radius in cement mortar 1:6, all as specified .

Providing cement concrete type B-1 1:2:4 ( 20 mm graded aggregate) as in coping, cills, plinth courses,etc.

15mm thick cement plaster on fair face of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, all as specified .

15mm thick cement plaster on brick work or surface other than fair face of brick work in cement mortar 1:6 finished even and smooth without using extra cement, all as specified .

Preparation to new plastered surfaces of wall and applying three coat of white wash all as specified.

Dismantling of chain link fencing wire mesh, any type

Supply and fixing chain link mild steel galvanished fencing 3.8mm dia of wire and mesh size 50 x 50 mm made upto matress lapped wire of any type of standards rail straining bolts including binding wire etc. complete all as specifide.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Conforming with Fe-410-W or (Gde E-250) quality A or Fe 290 (Gde E-165)

Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats of fencing posts and connecting plates , etc (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastning and fixing complete conferming to. Fe 410-W (Gde E-250) quality A

M/s. Rishav Sood

Havish Construction

Pathania Builders

Roshan Lal Thakur

malghotra construction co