REPAIR/MAINT OF WOODEN ALUMINIUM STEEL JOINERY FLOORING ANTI TERMITE TREATEMENT PLUMBING SANITARY FITTINGS FENCING AND CONNECTED WORK IN ZONE D AREA UNDER GE(E) MATHURA

Amount

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) area not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frames) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.

Taking down shutters of any description n exc 1 sq.m each complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq.m and n exc 2 sq. m each complete all as specified and as directed.

Taking down Shutters of any description exc 2 sq. m each complete all as specified and as directed.

S&F Pressed steel frames of size 125x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.with one shop coat of red oxide primer complete as specified and as directed.

S&F Pressed steel frames of size 105x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed blocks for fixing hold fasts and filling of frame/chowkhat etc. complete all as specified and as directed.

S&F 30 mm thick factory made flush shutters, solid core construction with block board core and plywood face panel commercial type on both sides complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panel commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick factory made glazed and skeleton shutters of 2nd class HW, open rebated and prepared to receive glass/gauze etc edges of framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR Pt-1 section 8.24 (a) complete all as specified and as directed.

S&F 35 mm thick second class hard wood Glazed and skeleton shutters of open rebated and prepared to receive glass gauze etc (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shluttersf as specified in SSR Part-I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick one side prelam colour PVC sheet reinforced with M.S. Square tube & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube & edges complete all as specified and as directed.

S&F to the frame at site, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be coverd with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed in the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spicified and as directed.

S&F Butt hinges 100 mm size of Mild steel, medium weight, cold rolled complete all as specified and as directed.

S&F Butt hinges 100 mm size of stainless steel, medium weight, complete all as specified and as directed.

S&F 150 mm long aluminium anodised handles, cast type complete all as specified and as directed.

S&F 125 mm long aluminium anodised handles, cast type complete all as specified and as directed.

S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 250 long mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 125 mm size aluminium anodized barrel tower bolts of extruded section and fixed with screw complete all as specified and as directed.

S&F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair Extruded aluminium handles of size 150 mm, fabricated type anodised complete all as specified and as directed.

S&F in repair 150 mm size aluminium anodized barrel tower bolts of extruded section and fixed with screw complete all as specified and as directed.

S&F in repair 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed with screw complete all as specified and as directed.

S&F in repair But hinges 150 mm size of Mild steel, medium weight, cold rolled complete all as specified and as directed.

S&F in repair floor door stopper of 150 mm size aluminium alloy body and tongue anodised with hard drwan steel spring complete all as specfied and as directed.

S&F in repair mild steel mortice lock vertical type100 mm size 4-lever with two keys complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets,stops end caps etc. complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spicified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame includig punching or drilling out, old, glazing pins/spring clips and providing and fixing new with putty or fixed with beads complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with Putty/wooden beading in square n exc. 0.5 square metre in each pane complete as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading etc exc 0.50 Sqm in each pane complete all as specified and as directed.

M&L for spot welding for welding of hinges, handle, bolts, etc to steel window and ventilators etc complete all as specified and as directed.

M&L for easing and adjusting of steel windows and ventilators including fittings of any size without taking down and making the windows and ventilators smooth functional complete all as sepcified and as directed.

S&F in repairs MS box type hinges 100 mm size cold rolled mild steel medium weight fixed/welded to steel window frame and MS Pressed steel door chowkhats etc and making good of damaged portion complete all as sepcified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer complete as specified and as directed.

M&L for prepration of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint for all hights complete all as specified and as directed.

M&L for 4 mm thick non-asbestos fibre cement building board and fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

M&L for Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with requiredEPDM rubber/neoprene gask etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws complete all as specified and as directed.

M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around theopening, complete all as specified and as directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size floor door spring & lock etc all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).

M&L for powder coated aluminium window and ventilator shutters (powder coating shall not be less than 50 microns of approved colour) side hung type with sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for partition using aluminium section with grove of size 63.5 x 38.1 x 2mm thick as in frame(square/rectanguler). MS Angle 65 x 65 x 6 mm and 150mm long shall be fixed at bottom of vertical members with dash fastener/screws and MS angle is embedded in PCC 1:2:4 type B1 block of size 150x150x150mm including providing 5mm thick tinted glass and 20mm thick Pre laminated Particle board in ratio of 50:50 fixed in grove of aluminium frame incuding all necessary accessories fittings etc complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beading exc. 0.5 square metre in each pane complete all as specified and as directed.

Resecuring or easing and adjusting door shutter of any description exc 1.50 Sqm but n. exc 4.00 Sqm each by repairing locking arrangement, floor spring, bottom and top pivot etc. to make the shutter smooth functional of shutter complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repair aluminium extruded section body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as sepcified and as directed.

S&F in repair Aluminium Door seal of overal size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters complete all as sepcified and as directed.

Dismantling boarding as in kitchen cabinet, cup boards/shelfs/partitions in any position fixed with screws complete all as specified and as directed.

S&F 18 mm thick WPC board plain white fixed with each other using slovent cement/adhesive and machine screws as in sides of cupboard/kitchen cabinet etc complete all as specified and as directed.

S&F 18mm thick WPC board one side laminated and other side balance white as on side of cupboard/Kitchen cabinet including shelves, partition drawer etc fixed as directed with solvent cement/adhesive and machine screws PVC edging/beading of size 18x1mm thick having density 600kg/per cum shall be provided on front visible edges of board complete all as specified and as directed.

S&F in repair Magnatic catcher (KTS-20) full extension load capacity 8 kgs suitable for cup board/kitchen cabinet shutter complete all as specified and as directed.

S&F in repair stainless steel handles, cast type polished bright of 100 mm size for kitchen cabinet shutters complete all as specified and as directed.

S&F in repair auto closing hinges 35 mm of 0 crank( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises compete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (Below or above ground level) complete all as specified and as directed.

M&L for 25 mm (average) thick cement concret type- B0 1:2:4 (using 12.5 mm graded stone aggregate) as leveling course in floor compete all as specified and as directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

All as per item serial No 64.00 here in before but as in vertical surface laid over and including 10 mm thick rendering in cement motar 1:3. complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:4 complete all as specified and as directed.

M&L for Vitrified coloured tiles (Double charge) 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

All as per item serial No 67 here in before but as in vertical surface laid over and including 10 mm thick rendering in cement motar 1:3. complete all as specified and as directed.

Demolition of stone slabs/tiles of any description or thickness in floors/apron etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillar, window cills, cooking platform and like laid over and including 10mm thick screed bed in cement mortar 1:4 and pointing in white cement (1:2) using marbal dust with admixture of pigment to match the shade of granite complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-22mm thick laid over and including 20mm screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection,/paths laid in panel surface finished even and fair without using extra cement complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L rendering 15mm thick on other than fair face of brick work or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturers instructions finished even & smooth without using extra cement complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid separately under relevant item of this BOQ.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed.

M&L for rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of concrete surfaces as in ceiling including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for prepration of newly plastered surface of walls providing 1mm thick wall care putty and applying two coat of distemper oil emulsion over and including a coat of alklai resitant primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

M&L for preparation of new plastered or un plastered surfaces of wall including cornices, pilasters etc and applying two coat of cement based paint of approved colour on wall Surface including all necessary arrangement for execution of work, complete all as specified and as directed.

S&F for PVC wall panelling in repair with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete all as manufacturer's instructions as specified and directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed.

M&L for preparation of new plastered surface of walls/ceiling and applying two coats of weather proof acrylic exterior paint over and including a coat of primer (100% acrylic) complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 25 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

S&F in repair Sinks with drainage board made out of stainless steel sheet lmm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and as directed.

S&F in repair Ball valves of PTMT high pressure, with polythene float & flynut complete, screwed for 25mm bore iron pipe or brass ferrule complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with stainless steel bracket guard & railing 60cm long complete all as specified and as directed.

S&F in repair Brass Chromium plated shower roses 125mm size with arm and swivel shower, complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with close top) 750 liters capacity having monkey protection cover hoisted and fixed in position on roof including connections and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore dia iron pipe complete all as specified and as directed.

S&F in repair Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes 20 mm bore dia complete all as specified and as directed.

S&F Toilet paper holder of stainless steel, grade 304 with wall flange of size 180x90x70mm fixed to walls complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated 2 way bib cock with wall flange fixed to 15mm bore dia pipe (min wt -400gm) complete all as specified and as directed.

S&F in repair stainless steel towel rail 600 mm long made out of 20mm bore stainless steel tube fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F Towel Ring of stainless steel of standard size fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls with suitable MS clamps complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls with suitable MS clamps complete all as specified and as directed.

S&F in repair PVC (SWR) of size 110mm bore bends any radius with oval access door complete as specified and as directed.

S&F in repair PVC (SWR) of size 75mm bore bends any radius with oval access door complete as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with acess door complete as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with acess door complete as specified and as directed.

S&F in repair PVC (SWR) floor trap plain 75mm dia of outlet with grating including jointing with solvent cement complete as specified and as directed.

S&F in repair bib taps cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for 15 mm bore dia iron pipes (min wt -450gm) complete all as specified and as directed.

S&F in repair angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for 15 mm bore dia iron pipes (min wt -450gm) complete all as specified and as directed.

S&F in repair pillar tap cast copper alloy chromium plated with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia iron pipe (min wt -500gm) complete all as specified and as directed.

S&F in repair Bib tap, standard of PTMT any colour high pressure screwed for 15 mm dia iron pipe and fixed, (Minimum weight 15 mm - 105 gms), complete all as specified and directed. .

S&F in repair Pillar taps, fancy type, PTMT of any colour high pressure of screwed for 15 mm dia iron pipe and fixed, (Minimum weight 15mm-120gms), complete all as specified and directed.

S&F in repair Stop valve of PTMT any colour high pressure screwed for iron pipe 15 mm dia fixed.(Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repair Angle stop valve of PTMT any colour high pressure screwed for 15 mm dia iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F Hand jet health faucet having 8mm dia & 1.5 mtr long SS flexible tube and wall hook with all connected fittings complete all as specified and as directed.

S&F stainless steel Grating doom 100 mm dia with or without hole complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nut of length 600mm complete as specified and as directed.

S&F in repairs PVC valveless syphonic action type, flushing cistern low level 10 liter capacity white/coloured with inlet ball valve float, handle including fixing brackets and 32mm bore PVC Flush pipe complete all as specified and as directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete, including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm bore PVC Flush pipe including jointing to socket of flushing rim complete all as specified and as directed.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, black, closed pattern with flat bottom, and cover with aluminised hinging device, complete all specified and as directed.

S&F in repairs vitreous china wash hand basin, white, flat back, size 550x400mm including excluding taps waste chain and plung brackets, complete all as specified and as directed.

S&F Vitreous China half stall type white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F in repair Waste coupling of cast copper alloy chromium plated (Half or full threaded) for 32mm bore discharge pipe complete all as specified and as directed.

S&F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or laid in floors complete all as specified and as directed.

M&L for treatment of soil under existing floors using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632, emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete as specified and as directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632 complete all as specified and as directed.

Dismantling fencing wire mesh any size and type complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in cement concrete, Brick work masonry etc and making good disturbed area complete all as specified and as directed.

Dismantling galvanised 2 strand, steel barbed wire, concertina coil in fencing complete all as specified and as directed.

Excavation in post hole (or similar hole) each n exc 0.5 cum each and getting out, returning filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

M&L for cement concrete type C2 1:3:6 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

S&F Mild steel work as in hand rails, half round or other section, balusters running bars, nosing to steps, wind ties, posts and struts in fencing incl cutting tops to shape as required, drilling holes , noching for wire , flat iron fillets for securing wiremesh etc. incl all necessary drilling, bolting or riveting etc & similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W or (Gde E-250) quality A or Fe 290 (Gde E-165) complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and as directed.

Supply only chain link having MS galvanised wire and mesh of size 50mmx50mm (min wt-2.50kg/sqm) complete all as specified and as directed.

Fixing only chain link fencing including line wire any mesh, size and tied to any type of standards, rails, straining bolts etc including provision of binding wire. complete all as specified and as directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins etc complete as specified and as directed Note: (Each line wire to be measured)

mh enterprises (BID ID -3122265)

B S ENTERPRISES (BID ID -3120872)

Ahmed constructions (BID ID -3128896)

JWALA ELECTRIC CONTRACTORS (BID ID -3121501)

DEVI DAYAL CONSTRUCTION CO (BID ID -3121851)

M/S R B CONSTRUCTIONS (BID ID -3131270)

BHARDWAJ CONSTRUCTIONS (BID ID -3121140)