GE 874/EWS-19/2020-21

Amount

Demolition of cement Concrete in ground floors and pavings(Un-reinforced) n exc 15 cm thickness (below or above ground level, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified.

Dismantling of timber scantling 40sqcm and over in section unframed work, as in any position, complete all as specified.

Dismantalling of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified & directed

Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15cm thickness (reinforcement cut as required to facilitate demolition), complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5Sqm each, complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5Sqm and not exceeding 4Sqm each, complete all as specified and directed.

Taking down shutters of any description not exceeding 1sqm each, complete all as specified and directed.

Taking down shutters of any description exceeding 1sqm and not exceeding 2sqm each, complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in cement concrete in sub-floors, sub-bases, floors and paving etc, finished even & fair, complete all as specified and directed.

25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in floor/sub base surface even and rough using extra cement,complete all as specified.

RCC nominal mix 1:1.5:3, type, A-1 (using 20mm graded crushed stone aggregate), as in slab supported on walls, beams, and columns in floors, roofs and the like, complete all as specified.

Form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for rough finished surfaces of concrete, complete all as specified and directed.

Supply and fixing TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified.

Second class softwood as in scantling, clean sawn fixed in position with nails, unframed work, complete, all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete, all as specified.

Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete, all as specified.

Walling of random rubble stone masonry uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4), complete all as specified.

Brick work with sub class ‘B’ modular bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified & directed.

Brick work with sub class ‘B’ modular bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified.

M&L Plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with nails or brads exc. 6 & n exc. 13 sqcm, complete all as specified.

M&L Plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with nails or brads exc. 3 & n exc. 6 sqcm, complete all as specified.

4mm thick plywood (03 Nos of ply),grade CWR type BB fixed with nails to timber frame work as in wall cladding/lining, complete all as specified.

2nd class soft wood "KHATAMBAND" (kashmiri Art) over 12mm thick BWR plywood and scantaling framework including cornice and beeding as required and applying three coats of polish after preparation of the surface, complete all as specified and directed by Eng-in-charge.

2nd class soft wood wall paneling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to existing frame with secret nailed as in wall/Ceiling pannelling 15mm including cornice and beeding as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed.

6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including GI 6mm adjustable suspender of required length of any description (Note:- The design and specification of the ceiling board to be approved by User/AGE/GE) complete all as specified and directed.

2nd class soft wood weather boarding clean sawn, plain, 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps complete all as specified.

2nd class soft wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.

Mild steel FI as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

35mm thick 2nd class soft wood plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats, complete all as specified.

35mm thick 2nd class soft wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete, all as specified.

30mm thick 2nd class soft wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (with sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. windows,ventilators, etc. are provided with stiles and rails as specified in SSR Part-I, Section 8, clause 8.24 (b) supplied and fitted to chowkats complete, all as specified.

Two coat of synthetic enamel paint over a coat of pink primer including cleaning dusting of new or previously untreated wood/plywood base surfaces for wall, door, window, ventilator and ceiling, not otherwise described over 10cm width or girth, complete, all as specified and directed.

Mild steel barrel tower bolt, stove enamelled black, with bright bolt of 100mm long, complete all as specified.

Mild steel barrel tower bolt, stove enamelled black, with bright bolt of 150mm long, complete all as specified.

Mild steel sliding door bolts, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 250mm long, all as specified.

Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified.

Mild steel butt hinges, medium weight, cold rolled, 75mm long, complete all as specified.

Mild steel pressed handle, oval type stove enamelled, black of size 100mm, complete all as specified.

Mild steel pressed handle, oval type stove enamelled, black of size 125mm, complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete, all as specified and directed.

Sheet glass ordinary quality, 4mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.

Supply and fixing factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II), including fixing of 150 mm long aluminium anodised tower bolt -02 Nos, 03 nos medium weight cold rolled MS butt hinges on each leaf, all as specified and directed by Engineer-in-Charge.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, fixed in repair, complete all as specified.

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos, tower bolt 02 Nos, hinges 03 nos , mortice lock (04 lever) 01 nos and door stopper 01 nos in each door anodised aluminum snap beading screws and 5.5 mm thick glass pane etc. complete all as specified.

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) in each leaf and 5.5 mm thick glass pane, complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:4 laid over and including 25mm thick PCC (1:2;4) type B0 using 12.5mm graded crushed stone aggregate, complete all as specified and directed.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10 mm thick rendering in CM 1:4 all as specified & directed.

Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B0 using 12.5mm graded crushed stone aggregate, complete all as specified and directed.

Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B0 using 12.5mm graded crushed stone aggregate, complete all as specified and directed.

Glazed ceramic coloured tiles 300x200 x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.

M & L light shade Vitrified ceramic tiles 10 mm thick (square/rectangular ) polished, area of each tile but not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B0 (using 12.5mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

Supply and fix Pergo tiles wooden mat finishes of size (1200x200x6 mm) laid over PVC foam 5 mm thick with SR adhesive over 50 micron polythene sheet complete all as directed by Engr-in-Charge. Make- Pergo/TDC/Silicon

Taking up or down steel tubing of 15mm bore pipe and connection fixed to walls, ceiling or laid in floor and including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection fixed to walls, ceiling or laid in floor and including cleaning for refixing or removal to store complete all as specified and directed.

Steel water tubing of 15 mm bore ‘Medium Grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

Steel water tubing 20mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceiling or laid in floors, complete all as specified.

S & F in repair Rotational moulded polyethylene water storage tank tripple layered cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, connecting to inlet and outlet pipe connections, with and including 20mm dia GI wash out with plug, complete all as specified and directed.

S & F in repair Rotational moulded polythethylene water storage tank tripple layered cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position all as specified in SSR Part I, connecting to inlet and outlet pipe connections, with and including 20mm dia GI wash out with plug, complete all as specified and directed.

15mm bore bib taps Standard of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), fixed in repair, complete all as specified.

15mm bore Pillar tap of PTMT any colour high pressure screwed for iron pipes or for union (min weight 15mm-110gms), fixed in repairs, complete all as specified.

15mm bore Stop valve of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), fixed in repairs, complete all as specified.

waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) for 32mm bore dia of discharge pipe to WHB sink, fixed in repair, complete all as specified.

PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed in repair, complete all as specified.

PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed in repair, complete all as specified.

PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in trenches, floor/walls as soil pipe(vent pipe), fixed in repair, complete all as specified and directed.

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in trenches, floor/walls as soil pipe, fixed in repair, complete all as specified and directed.

Vitreous china squatting pan (Orissa pattern) size 580 x 450 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor, fixed in repair, complete all as specified and directed.

Vitreous china water closet pan (pedestal pattern) white, excluding flushing cistern and flushing pipe and including PVC seat cover & including fixing bolts, fixed in repair, complete all as specified and directed

Vitreous china bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws and pointing around urinal back in cement etc and 32mm dia PVC waste pipe, fixed in repair, complete all as specified.

S&F in repair PVC valve less syphonic action type flushing cistern 10ltr capacity, low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints, complete all as specified.

Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 15mm bore fixed in repair, complete all as specified and directed.

Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore fixed in repair, complete all as specified and directed.

Towel rack 600mm long with lower hangers (Stainless steel) , fixed in repairs , complete all as specified, Make: Jaquar code No AHS-1581H or equivalent as approved by GE.

S & F in repair Wall mixer non telephonic shower arrangement with connecting legs and wall flanges, complete all as specified and directed. Make: Jaquar code No CON-219KN or equivalent as approved by GE.

Central hole basin mixer for WHB with round spout with popup waste system with 450mm Long Braided Hoses, 20mm catridge size suitable for 15mm bore GI pipe triple action, fixed in repairs complete all as specified, Make: Jaquar code No FLR-5051B or equivalent as approved by GE.

Angular Stop cock CP with wall flange suitable for 15mm bore GI Pipe fixed in repair, complete all as specified

Health faucet CP (ABS Body) with 1m long easy flex tube in chrome finish and wall hook fixed in repairs , complete all as specified .

Vitreous China urinals :Flat back large of size 420 x 395x635mm, white colour Make : CERA /URS-WHT-0707 of size 530x340x360mm, white colour, Make : Jaquar/RIVA: 96003 of size 69x34.50x25cm, Make- HINDWARE (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortor 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe waste pipe grating and union for discharge pipe fixed in repair complete all as specified

S & F Door closure hydraulically regulated designation No. 3 universal type of cast iron body, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repairs, all as specified.

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair, all as specified.

Vitreous china Wash hand basin basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipefixed in repair, complete all as specified.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) for 32mm bore dia and LDPE waste pipe, fixed in repair, complete all as specified and directed.

20mm bore Gun metal, globe or gate valves (ISI Marked), with iron wheel head, screwed both ends for iron pipe, fixed in repair, complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), finished even and smooth (without using extra cement ), complete all as specified.

15mm thick rendering in CM 1:4 on other than fair faces of bricks/stone work making surface even and smooth without using extra cement, complete all as specified.

Two coat of Cement base paint over to new plastered surfaces of wall including preparation of surface, complete all as specified.

M & L two coat of oil bound distemper on walls with 1mm wall care putty incl preparation of new plastered/unplastered surface complete all as specified and directed

4mm thick plywood (03 Nos of ply), grade CWR type BB fixed with nails to timber frame work as in ceiling, complete all as specified.

AKASH CONTRACTORS