Estimate for renovation of three storey 30 no. Quarters (BLOCK A of CLASS IV ) of canal colony,Jalandhar.

Amount

scraping © cement plaster (inside of quarters)

12.5 mm thick cement plaster 1:4

Finishing walls with exterior decorative cement based such as snowcem, robbiacem etc. two or more coats to give an even shade (inside quarters)

Scraping ( c ) cement plaster (outside of quarters)

12.5 mm thick cement plaster 1:3 on floor (terrace)

cement rendering on plaster 1 mm thick

20mm thick cement plaster 1:4 in two coat work

Finishing walls with exterior decorative cement based such as snowcem, robbiacem etc. two or more coats to give an even shade (for outer area)

Dismantling cement conglomerate floors 25 mm to 50 mm thick without concrete base

Conglomerate floor 50 mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Factory manufactured flush door fixed in position iron hinges , etc( excluding the cost of any fittings other than specified above but including labour for fixing the same in position ( a ) commercial with elm or gurjan facing on both / sides laminated core and lipped edges:- (iv) 35 mm thick

Applying pink primer or aluminium priming coat on wood work including preparation of surface

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b ) Glazing area above 0.09sqm (iii) 5 mm thick plate glass (INDIAN)

Providing and fixing in position on terrace ( at all floor levels) HDPE water storage tanks of approved make ( to the approval of Engineer in-charge) with cover with suitable loking arrangement and making necessaryholes for inlet, outlet over flow pipes but without fittings and base support for tanks (i) triple layer tanks

Providing and fixing in position on terrace ( at all floor levels) HDPE tank cover for water storagetanks of approved make ( to the approval of Engineer in-charge) Complete in all respect . ( ii ) For 1000 ltr capacity tank and above

1.2 meter high G.I barbed wire fencing (a) 1.2 meter high G.I barbed wire fencing with 1.8 meter angle iron posts 40x40x6 mm placed every 3 meters centre to centre 0.6 meter below ground level , every 15th post , end post, corner post suitable strutted and provided with 9 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples , turn buckles etc. including oundation concrete 1:2:4 of size 0.30x0.30x0.75 m for each post complete as per technical clauses 808 of MORT&H specifications.

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Painting two or more coats with synthetic enamel paint in all shades on old wood work or metallic or plastered, concrete surface to give an even shadeincluding rubbing down old paint.

First class burnt brick work laid in cement sand mortar 1:5 in first story upto 4 meter above plinth level.

Informatory sign board 800x600mm rectangular as per IRC 67-2012 with high intensity Microprismatic grade retro reflecting Informatory sign board 800x600mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .(a)Using high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 09 and as per IRC 67 2012

Place Identification sign board 900x600mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 (a) Using high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 09 and as per IRC 67 2012

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete (b) 20mm i/d

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete (a) 15mm i/d

Providing and fixing in position automatic brass Ball Cock in tanks (B) Brass Ball Cock with rod and Plastic Ball (ii) 20mm i/d.

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. (b)G.I. tank nipple 20mm i/d

Providing and fixing PHILIPS 25W LED STREET LIGHT

Dismantling concrete (b)Cement concrete plain 1:4:8

Cement concrete 1:4:8 (b) With stone aggregate 40mm gauge (i) mixing by manual means

Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- (i) Overall size 6sq.mm (2Core) Un-armoured (On-Surface)

providing and fixing in position Wire Gauge 22 gauge 12x12 mesh of (140 G gauge) at site of work.

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge

Painting new letters and figures of black synthetic enamel paint to an even shade

Providing & fixing glass strips 4mm thick in floors (a) 50 mm wide

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete (b) 20mm i/d Brass Ball valves

Any Other Item

THE SUKHAD LC CO OPERATIVE SOCIETY LTD