Building Electrification and Associated Works (Phase-2) of block 102A at INRP site, BARC, Tarapur

Amount

Supply, Installation, Testing and Commissioning of following configuration 415V, 3-phase, 4 wire, double door, with R Y B Phase indication and MCB position indication through glass front, IP-54, Prewired with HFFR copper wires, horizontal type, metallic Double Door, Phase Segregated three pole and neutral MCB Distribution Board fabricated out of 2 mm thick, powder coated with RAL7035 shade, pre-galvanized G.I. sheet steel, suitable for surface mounting/installation in existing enclosure complete with appropriate rating of tinned copper bus bar/ Cu wire, neutral bus bar, earth bar, din bar, brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, etc. as per drawing, specifications & generally as per relevant IS, SLD, Technical specification & as per instructions of Engineer-in-charge.

MCB DB with Incomer of 25A, Isc=10kA, Type C, TPN MCB with 2-Pole, 25A, Isc=10kA, (100mA) RCBO for each phase and 36 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 25A, Isc=10kA, Type C, TPN MCB with 2-Pole, 25A, Isc=10kA, (100mA) RCBO for each phase and 18 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 40A, Isc=10kA, Type C, TPN MCB with 2-Pole, 25A, Isc=10kA, (100mA) RCBO for each phase and 18 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 16A, Isc=10kA, Type C, TPN MCB with 2-Pole, 16A, Isc=10kA, (100mA) RCBO for each phase and 24 nos. of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 16A, Isc=10kA, Type C, TPN MCB with 2-Pole, 16A, Isc=10kA, (100mA) RCBO for each phase and 18 nos. of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 16A, Isc=10kA, Type C, TPN MCB with 2-Pole, 16A, Isc=10kA, (100mA) RCBO for each phase and 24 nos. of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

Supply, Installation, Testing and Commissioning of following configuration 240V, 1-phase, 2 wire, with Phase indication and MCB position through glass front, Pre wired with HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Pre Galvanized G. I sheet steel, powder coated with RAL7035 shade, suitable for surface mounting/installation in existing enclosure complete with appropriate rating of tinned copper bus bar/Cu Wire, neutral bus bar ,brass neutral link, brass earthing studs, phase distribution drawing, danger board, name plate, earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per drawing, specifications & generally as per relevant IS & as per instructions of Engineer-in- charge.

MCB DB with Incomer of 63A, Isc=10kA, Type C, DP MCB and 12 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 50A, Isc=10kA, Type C, DP MCB and 12 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 40A, Isc=10kA, Type C, DP MCB and 12 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 32A, Isc=10kA, Type C, DP MCB and 10 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 25A, Isc=10kA, Type C, DP MCB and 6 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 16A, Isc=10kA, Type C, DP MCB and 12 nos. of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

MCB DB with Incomer of 16A, Isc=10kA, Type C, DP MCB and 8 nos. of 6A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.

Supply

Installation

Supply and Installation of the following MCB including surface mounted GI Box and Decorative switches as per Technical specifications.

2 nos. of 16A, Single Pole, Isc=10kA, Type C-Curve, MCB along withhot dipped Galvanised powder coated GI sheet steel Face Plate with suitable DIN rail and mounting arrangements with 2 mm pre galvanised GI 2mm sheet steel surface mounted enclosure box along with industrial plug top as per technical specification.

Supply

Installation

4 nos. of 6A, Single Pole, Isc=10kA, Type C-Curve, MCB along with pre- Galvanised powder coated GI sheet steel Face Plate with suitable DIN rail and mounting arrangements with 2 mm pre galvanised GI 2mm sheet steel surface mounted enclosure box along with industrial plug top as per technical specification.

Supply

Installation

2 nos. of 6A, Single Phase, Modular type Decorative Switch with Polycarbonate box, heavy duty polycarbonate face plate with heavy duty polycarbonate enclosure with surface mounting arrangement and suitable mounting arrangements as per technical specification.

Supply

Installation

Supply and Installation of the following Industrial/modular MCB and metal clad/polycarbonate plug sockets with suitable industrial plug tops ( 3-pin) along with surface mounted powder coated GI Box with suitable mounting arrangements on wall and 3 pin domestic plug sockets with suitable PVC Box, switch and plug tops as per Technical specifications.

1 nos. of 10A and 1 nos. of 20A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket along with pre- Galvanised powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements along with surface mounted powder coated 2mm thick GI Box with suitable mounting arrangements on wall as per technical specification.

Supply

Installation

1 no of 6A and 1 no of 16A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch for each Socket and heavy duty polycarbonate Face Plate, plug tops and suitable surface mounting arrangements as per technical specification.

Supply

Installation

1 no of 6A and 2 no of 16A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch for each Socket and heavy duty polycarbonate Face Plate, plug tops and suitable surface mounting arrangements as per technical specification.

Supply

Installation

2 nos. of 16A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch and heavy duty polycarbonate Face Plate, plug tops and suitable mounting arrangements as per technical specification.

Supply

Installation

2 nos. of 6A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch and heavy duty polycarbonate Face Plate, plug tops and suitable mounting arrangements per technical specification.

Supply

Installation

1 nos. of 10A, 2 nos. 20A Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB along with pre- powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements along with surface mounted powder coated 2mm thick GI Box with suitable mounting arrangements on RCC/Masonary wall as per technical specification.

Supply

Installation

Supply and surface conduiting of heavy duty rigid GI ERW conduit pipe of 25mm sizes along with all accessories such as inspection bends, junction box, socket, check nut, etc. including making threads, removing burrs, connection of accessories, drawing of fish wire, cleating with heavy dyty GI saddle or suit to site clamps on RCC wall, column, steel structure . as required under the instruction of Engineer-in-in charge. 2mm thick powder coated GI surface type junction box with suitable mounting arrangements shall be provided.

Supply

Installation

Supply and laying of 14 SWG bare solid copper conductor throughout along the conduit including fixing with ties, brazing etc as required.

Supply

Installation

Supply, Installation, Testing and Commissioning of LED light fittings with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, complete with light fitting accessories, including supply of fixing accessories, twin twisted tinned 1.5 sq. mm copper flexible cords for terminal connections, 16 SWG copper wire for earthing , flexible GI metallic conduit sleeves, PVC conduit bushes, cable lugs and testing and commissioning as per the specification of the following:

Industrial box type, surface mounted 4ft fixture along with one nos. of 18W, 2500 lm, 130 lm/w efficacy, CCT 6500K, THD<10%, PF>0.95, 4ft LED tube. The fixture shall have single piece construction made of white powder coated CRCA sheet steel suitable for above LED tube light. The LED shall be mounted on extruded aluminium strip which acts as heat sink and is integral part of tube which is made up of extruded poly carboante material which gives diffused light.

Supply

Installation, testing and commissioning

Industial box type, 4ft Functional with 2x18W LED replaceble type Tube with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, with a nominal system lumen output of 2350 lumens per LED tube. The luminaire should have a color temperature of 6500K and CRI>80. minimum 130 lm/w efficacy, THD < 10% and PF > 0.95. The batten luminaire housing should made of white powder coated CRCA sheet steel. The LED shall be mounted on extruded aluminium strip which acts as heat sink and is intergral part of tube which is made up of polycarbonate material which gives diffused light. The total power consumption should not exceed 38W (including driver).

Supply

Installation, testing and commissioning

Decorative box type, recessed type LED 4ft Slim Batten (40mm x 46mm x 1127mm - W x H x L) with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs,with a nominal system lumen output of >2000 lumens and a minimum system efficacy of 110 lm/W.The luminaire should have a color temperature of @ 6500K and CRI>80. THD < 10% and PF > 0.95. The luminaire housing should made of Extruded Aluminium with extruded PC diffuser & should have anodised finish. Mounting shall be suitable for ceiling suspended. The total power consumption should not exceed 18W (including driver)

Supply

Installation, testing and commissioning

Decorative box type, 4ft fixture along with two nos. of 18W, 2500 lm, 125 lm/w efficacy, CCT 6500K, THD<10%, PF>0.95, 4ft replacebale type LED tube. The fixture shall have single piece construction made of white powder coated CRCA sheet steel suitable for above LED tube light. The LED shall be mounted on extruded aluminium strip which acts as heat sink and is integral part of tube which is made up of extruded poly carboante material which gives diffused light. Mounting shall be suitable for ceiling suspended.

Supply

Installation, testing and commissioning

LED downlighter light fitting of 35W having System Efficacy >120 lm/W, system output >4400 Lumens for 35W THD <10%, Power Factor >0.95, CRI >80, CCT 6500, IP65 protected . The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser . Beam angle of the luminaire is 120deg or more. BIS compliant driver , EMC -EMI compliant. Driver shall have 2.5KV Surge protection. Mounting shall be suitable for surface/wall mounted.

Supply

Installation, testing and commissioning

LED downlighter light fitting of 35W having System Efficacy >120 lm/W, system output >4400 Lumens for 35W THD <10%, Power Factor >0.95, CRI >80, CCT 6500, IP65 protected.The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser. Beam angle of the luminaire is 120deg or more. BIS compliant driver , EMC -EMI compliant. Driver shall have 2.5KV Surge protection. Mounting shall be suitable for ceiling suspended.

Supply

Installation, testing and commissioning

LED Bulkhead with a nominal system lumen output of 700 lumens and a minimum system efficacy of 110 lm/W. The luminaire should have a color temperature of 6500K and CRI > 70. The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser. Beam angle of the luminaire is 120deg or more. BIS compliant driver , EMC -EMI compliant. Driver shall have 2.5KV Surge protection. Mounting shall be suitable for ceiling suspended.The luminaire shall meet IP65 rating and IK 08 rating with THD < 20% and PF > 0.9. The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser. The total power consumption should not exceed 10W (including driver).

Supply

Installation, testing and commissioning

LED Bulkhead flameproof with a nominal system lumen output of 1100 lumens and a minimum system efficacy of 110 lm/W. The luminaire should have a color temperature of 6500K and CRI > 80. The luminaire shall meet IP66 rating and IK 08 rating with THD < 20% and PF > 0.9. The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser. The total power consumption should not exceed 10W (including driver).

Supply

Installation, testing and commissioning

2 x 36 W LED Flameproof Ceiling Suspended type with a nominal system lumen output of 8000 lumens and a minimum system efficacy of 110 lm/W. The luminaire should have a color temperature of 6500K and CRI > 70. The luminaire shall meet IP65 rating and IK 08 rating with THD < 20% and PF > 0.9. The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser.

Supply

Installation, testing and commissioning

LED higbay light fitting complete with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, LED High bay wide beam of 140W having System Efficacy >150 lm/W, lumen output of 18800 lumens system output THD <10%, Power Factor >0.95, CRI >80, SDCM<5, CCT 5700, Full IP 66 protected pressure die cast aluminium (LM6) housing having integrated PC lens cover with Impact resistance IK08. Operating temp. -10 degrees to 50 degrees C. BIS compliant driver, EMC -EMI compliant. Driver shall have 10KV Surge protection. Shall have eye bolt hook for surface/ suspended mounting.

Supply

Installation, testing and commissioning

LED higbay light fitting wide beam of 160W having System Efficacy >160 lm/W, lumen output of 19880 lumens system output THD <10%, Power Factor >0.95, CRI >80, CCT 5700, Full IP 65 protected pressure die cast aluminium (LM6) housing having integrated PC lens cover with Impact resistance IK08, Life L70B50 @ 50k hrs. Operating temp. -10 degrees to 50 degrees C. BIS compliant driver, EMC -EMI compliant. Driver shall have 6KV Surge protection. Shall have eye bolt hook for surface/ suspended mounting.

Supply

Installation, testing and commissioning

36 watt recessed mounted 2'x2' LED mirror optic with light fitting accessories, including supply of fixing SS accessories, flexible GI metallic conduit sleeves, PVC conduit bushes, Cu cable lugs, fitting having System Efficacy >125 lm/W, THD <10%, 4000 lumen, Power Factor >0.90, CRI >80, CCT 6500K, UGR<16 & SDCM<=4 , CRCA housing with PS diffuer.

Supply

Installation, testing and commissioning

150W LED based Flood light, housing made up of pressure die cast aluminum Alloy with effective thermal management,sturdiness. The fixture should have a minimum system efficacy of 130 lumen/Watt and a minimum system lumen output of 18000 lumens. The fixture shall have a CRI of minimum 80. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=05. The fixture driver should have an operating voltage range of 140-270 V, surge protection of >=3KV, PF >0.9 and THD<20%.

Supply

Installation, testing and commissioning

Outdoor type 60 W LED Street light suitable for wall mounting with all the accessories , IP65 pole mounted type, housing made up of pressure die cast aluminum Alloy with effective thermal management,sturdiness. The fixture should have a minimum system efficacy of 120 lumen/Watt and a minimum system lumen output of 8400 lumens. The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=05. The fixture driver should have an operating voltage range of 140-270 V, surge protection of >=3KV, PF >0.9 and THD<20%.

Supply

Installation, testing and commissioning

150W, 240V, 50Hz, SON HPSV lamp with non integral type control gear box with complete accessories for cell lighting

Supply

Installation, testing and commissioning

250W, 240V, 50Hz, SON HPSV lamp with non integral type control gear box with complete accessories for cell lighting

Supply

Installation, testing and commissioning

Supply, Installation, Testing and Commissioning of Ceiling mounted dual type occupency sensor with inbuilt or external power pack and auxiliary relay having min 15m sensing range in 180 deg orientation and time delay ranges from 30sec to 30min and should have output relay capacity of 1000W (for LED lighting fixtures).

Supply

Installation

Supply, Installation, Testing and Commissioning of Occupancy sensor bypass switch box having 3 pole rotary switch fixed on GI enclosure with cover.

Supply

Installation

Supply of Single Core flexible HFFR PVC wires ( Copper ) of size mentioned below in voltage grade 1100 V as per the IS: 3961 ( part V ) - 1968. As per conductor class 2 Type-C of IS: 8130 / 1984 as per technical specification

Installation/drawing through concealled/ surface conduit and wiring and termination at both ends of Single Core HFFR PVC wires ( Copper ) of size mentioned below in voltage grade 1100 V as per the IS: 3961 ( part V ) - 1968. As per conductor class 2 Type-C of IS: 8130 / 1984 as per technical specification

Supply, Installation, Testing and Commissioning of Copper Earth Plate 600 mm x 600 mm x 3.15 mm thick of high grade quality including accessories, GI clamp, connection of 2 x 95sqmm copper conductor, and providing civil masonry pit and enclosure with GI cover plate having locking arrangement and 50mm dia GI watering pipe of 2.7 metre length with charcoal / coke and salt, excavation/piling, backfiling with black cotton soil, compacting watering, etc as required. as per IS 3043 standard as per attached technical specification.

Supply

Installation

Supply, Installation & Testing of Earthing with tinned copper earth rod 25mm dia x 3mtr long including accessories,GI clamp, test link, connection of 2 x 95sqmm copper conductor, providing concrete inspection pit with cast iron cover having lifting lug and locking arrangement, 50mm dia GI watering pipe with funnel, charcoal/coke, salt, excavation/piling, backfiling with black cotton soil, compacting watering, etc as required.

Supply

Installation

Supply & Installation of Earth Test link Boxes weatherproof type ( MOC: Hot Dip Galvanised with powder coating ) as per the attached technical specification

Supply

Installation

Supply, Installation, Tesing & Commissioning of following size tinned, stranded, flexible copper earthing conductor at 1000mm below ground level including excavation, connection to earth pits at one end through bolting with suitable size heavy duty copper lugs (Supply of lugs are not in the scope of this item) and conductor tail at other end through brazing/exothermic welding, including clamping, brazing as per ASTM, connection, refilling the trench, etc as required. etc. as per instructions by Engineer-In-Charge.

95 sqmm stranded bare tinned copper conductor

Supply

Installation

10sqmm insulated stranded copper wire to be installed in concealed 25mm HDPE pipe(Supply of HDPE pipes are not in the scope of this item) .

Supply

Installation

Supply, Installation, Testing and surface laying of 10 sqmm tinned coper conductor including clamping/cleating on wall, making chase, repairing the same, connection with earth pad at one end and DBs at other end clamping, brazing etc. as per instructions by Engineer-In-Charge.

Supply

Installation

Supply of Copper lug suitable for above along with SS nut bolts of size 10mm , for terminating 10 sqmm tinned copper conductor at the earth pad/ DBs.

Supply

Installation

Supply, Installation & Testing of flexible, stranded, earthing conductor and suitable size heavy duty tinned copper lugs(Supply of lugs are not in the scope of this item) as required for connection to earth plate/pad, motor and other equipment, etc

95 sqmm stranded bare tinned copper conductor

Supply

Installation

70 sqmm stranded bare tinned copper conductor

Supply

Installation

50 sqmm stranded bare tinned copper conductor

Supply

Installation

25 sqmm stranded bare tinned copper conductor

Supply

Installation

16 sqmm stranded bare tinned copper conductor

Supply

Installation

10 sqmm stranded bare tinned copper conductor

Supply

Installation

6 sqmm stranded bare tinned copper conductor

Supply

Installation

4 sqmm stranded bare tinned copper conductor

Supply

Installation

2.5 sqmm stranded bare tinned copper conductor

Supply

Installation

14 SWG solid bare tinned copper conductor

Supply

Installation

Providing and fixing 300mm length cable tray equipotential bonding conductor made up of 10sqmm flexible stranded bare copper conductor having copper lugs (Supply of lugs are not in the scope of this item) at both ends for connection.

Supply

Installation

Supply, Testing and fixing vertical air termination made up of 20mm dia, 1 mtr long solid copper rod attached to 145mm dia. Copper sphere having drilled and tapped holes for fixing 5 nos. of 390mm long spikes and square copper plate base.

Supply, Fabrication and Installation of hot dipped galvanized Standard steel sections as per IS 2062 Grade BR for cable tray supports including hot dipped galvanized GI rod for cable tray support, chequered plates for trench covers, swivel washer, base frames for panels, anchor fasters, wall frames and brackets for supporting equipment. Fabrication shall include drilling, entiling, welding wire brush cleaning, supply of all consumables like gas, welding rods, Zinc coating paint finish during installation. After fabrication two coats of epoxy based primer and two coats of finish paints shall be applied. (Hot dipped galvanising shall be carried out for all item including nut-bolts.)

Supply, Testing and installation of ladder type FRP cable tray with all accesories such as tees, bends, riser, reducer etc. as per drawing of following size having min 5mm thick side channel of 100mm and rungs spaced at not more than 250mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long groove for adjustment and suitable for indoor as well as outdoor environment.

150 mm (side channel 50mm)

Supply

Installation

Supply

Installation

Supply

Installation

Supply, Testing and installation of perforated type FRP cable tray with all accessories such as tees, bends, riser, reducer etc. as per drawing of following size made up of min 5mm thick FRP sheet with channel of 100mm, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long groove for adjustment and suitable for indoor as well as outdoor environment.

Supply

Installation

Supply

Installation

Supply & Testing of Power Cables 2XWY as mentioned bellow, Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath, outer sheath FRLS PVC (ST-2 type) , of 1.1 kV grade supplied in non returnable metallic drum as per IS 7098 ( part - 1 ) 1988.

Installation of Power Cables 2XWY as mentioned bellow, Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath , outer sheath FRLS PVC (ST-2 type) , of 1.1 kV grade as per IS 7098 ( part - 1 ) 1988.

Supply and Installation of Cu/Al Lug suitable for cable of following size multistranded, round wire Armoured, XLPE insulated power Cables as mentioned below. (Note - Unit "set" means 4 nos. of lug at one end of cable.)

Supply and Installation of Brass Double Compression type Cable gland suitable for Multistranded, round wire Armoured, XLPE insulated for cables of following sizes.

PA System

Supply, Installation & Testing of Terminal box fabricated out of 2 mm thick hot dipped galvanised powder coated GI sheet, punched hole for conduit entry on all sides, 20 nos of terminals of 4sqmm, etc as required.

Supply

Installation

Junction box fabricated out of 2 mm thick hot dipped galvanised powder coated GI sheet, punched hole for conduit entry on all sides and cable of size 20 pair X 1.5sqmm with 50 nos of terminals of 4sqmm, mounting arrangement, etc as required.

Supply

Installation

Junction box fabricated out of 2 mm thick hot dipped galvanised powder coated GI sheet, punched hole for conduit entry on all sides and cable of size 10 pair X 1.5sqmm with 20 nos of terminals of 4sqmm, mounting arrangement, etc as required.

Supply

Installation

Supply, Testing and Laying of 1 Pair X 1.5sq. mm stranded, twisted pair , HFFR PVC Type-C sheath, stranded copper conductor, flexible cable in existing laid concealed or surface conduit.

Supply

Installation

Box Type Loud Speaker Wall Mounted 6W

Horn Type Loud Speaker Wall Mounted 20W

EPABX System

Indoor type double enclosure (MOC: pregalvanized GI sheet steel) powder coated MDF box 100 + 100 indoor type TTB made of SWG 14 for telephone cable as per attached tech spec.

Supply

Installation

Indoor type double enclosure (MOC: pregalvanized GI sheet steel) powder coated MDF box 50 + 50 indoor type TTB made of SWG 14 for telephone cable as per attached tech spec.

Supply

Installation

Suppy, delivery at site and installation of OLED, Intel Core i9-13900H 13th Gen 2.6 GHz (24MB Cache, up to 5.4 GHz, 14 cores, 20 Threads, 16" (40.64 cm) 2.8K 120Hz OLED, Laptop(32 GB RAM, 1TB SSD, 4GB RTX 3050, Win11, Backlit KB, Fingerprint, Silver Grey including five years onsite warranty.

Supply, Delivery & Installation

Prefabricted powder coated GI box to accomodate modular type 2 nos RJ11 socket unit suitable for concealing or surface mounting.

Supply

Installation

Front plate with 2 no's of modular type RJ11 socket unit.

Supply

Installation

Laying, casing, caping, dressing of 2 pair, 0.5mm dia., copper conductor, unarmoured telephone cable

Supply

Installation

Supply and laying of CAT-6 cable in existing laid concealed or surface conduit or cleating on wall/ceiling, including dressing, clamping, cable tagging, marking, connector, termination etc., as required

Supply

Installation

Corded Landline Telephone: Supply of coil corded, wall/Desk mountable Electronic handset telephone set with three step ringer volume (High/Medium/Low), Redial memory, Mute, Pause, Flash Redial, Ring LED indication, plastic body with 1 year manufacturer warranty.

Supply, Installation and delivery at site of Windows 11 , 1x Intel Xeon E-2200 processors, up to 6 cores at 95W., NVIDIA RTX A6000, 128GB in 4x DIMM slots using 32GB DIMMs 2666MHz TruDDR4, Up to 3 PCIe Card Slots, 22 TB SSD & Laser Printer Print, Scan & Copy 2 Sided automatic duplex Printing with five no's of spare toner and three cartridge as per technical specification. Three years onsite warranty shall be provided for the devices.

Supply

Installation

Making the opening in brick masonary for door/window/clear story opening including dismantling in floor or walls by cutting masonary and making good the damage to walls, painting, flooring and jambs complete to match existing surface including disposal of rubbish to the naerest dumping ground.

Supply and installation of GI anchor fastener of size M12x150 mm by drilling through concrete block as per site requirement for fixing plate EP's or other structure as per tender tech spec.

Supply

Installation

Supply and installation of GI anchor fastener of size M16x150 mm by drilling through concrete block as per site requirement for fixing plate EP's or other structure as per tender tech spec.

Supply

Installation

Supply and installation of executive Desk In Leon/⁠Walnut Teak Finish With File Cabinet And Pedestal, Table H 29.3 x W 72 x D 36; Storage H 30 x W 48 x D 18. Heavy duty prelamboard/Plywood, integrated CPU stand as per technical specification.

Supply, testing & installation of ladder type cable tray of following size fabricated out of 2mm thick sheet steel having side channel of 100mm, rungs spaced at 250mm, hot dipped galvanized, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long groove for adjustment and suitable for indoor as well as outdoor environment (inclusive of Horizontal bend, Tee, Cross, Reducer, Vertical bend etc.) as per technical specification.

750mm wide

Supply

Installation

450mm wide

Supply

Installation

300mm wide

Supply

Installation

150mm wide (side channel 50mm)

Supply

Installation

Supply and installation of perforated type cable tray of following size fabricated out of 2mm sheet steel having side channel of 100mm, cross perforation not more than 17.5%, hot dipped galvanized, single length not less than 2.5mtr with two coupling/joint plates per tray length having one long groove for adjustment and suitable for indoor as well as outdoor environment (inclusive of bends, reducers etc.)

300mm wide

Supply

Installation

150mm wide

Supply

Installation

M/s. Gandhekar Electrical Pvt. Ltd

Modern Electric Company

Kulaswaminee Engineerrs