Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAdmitted-Finance | ₹32.7 L | L1 | Admitted-Finance |
| 2 | L2₹38.9 LAdmitted-Finance | ₹38.9 L | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical Technically Disqualified |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical EMD/Fee not received |
| 5 | Rejected-Technical 301 302 THIRD FLOOR HERITAGE HORIZON OFF C G ROAD NAVARANGPURA AHMEDABAD AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | - | - | Rejected-Technical Technically Disqualified |
| Sl No | Description | Qty | Unit | JC FIRE DOOR CORPORATION L2 | OLO Housing Infra LLP L1 |
|---|---|---|---|---|---|
| 1.00Providing and fixing of Hollow metal Un-lnsulated 2 hrs. fire rated doors as per IS 3614 part-1, for stability and integrity. Pressed galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall be tested to IS 3614 part 21 ISO 834-1 Part 1 / BS476 Part 20 & 22, CBRI / Cerifire or third party certified or equivavelent lab, for minimum rating of 120mins, in latched /unlatched condition (if used with deadbolts and pull handles). Labled doors with certification shall be with vision glass as a part of complete assembly. Manufacturer test certificate shall cover doors both single and double leaf and all doors supplied shall be within the tested specimen, deviation in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. All doors and frames shall be finished Powder coated of not less than 60 micron in desired shade as per the direction of EIC and shall have passed minimum 500 hours of salt sprey test. Door frame shall be single / double rebate grooved profile of size 100 x 57 / 143 x 57 mm made out of minimum 1.20 mm thick galvanized steel sheet as per the specifications. Frames shall be mitered and field assembled with self tabs. Frames to have inbuild grooved sealing system and shall be site fitted with fire rated EPDM gasket as standard. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf shall be 46mm thick fully flush double skin door, Un-insulated with or without vision lite. Door leaf shall be manufactured from 0.80 mm thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4 mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a clipon arrangement. The glass should be 6mm clear borosilicate fire rated glass of relevant rating of the door. | |||||
| 1.01 | Fire exit staircase doors (FD) : 2hrs fire rated Double leaf door of size Approx 1500mm x 2100 mm with vision panel with fire rated hardware set as follows
Accessories: Door size 1500 mm X 2100mm ( Double leaf door shutter )
Accessories S.S Ball Bearing Hinges
Vision Panel with Fire Rated glass of size : 200 x 450mm (6 mm thick clear toughened fire glass)
Panic exit device for Double leaf door
External Trim Bar (Panic Latch)
Heavy duty door closer
Installation kit : Fixing shield and other misc. items | 90 | Sqm | 15,000 ₹13.5 L | 16,512 ₹14.9 L |
| 1.02 | Electric panel room fire doors (FD1): 2hrs fire rated single leaf door of size with vision panel with fire rated hardware set as follows for various sizes
1) Ball bearing butt hinges, SS304 of size 100 X 75 X 3mm with screws in SS - 4 Nos
2) Mortice sash lock H11, 55mm BS, 20mm Sq. forend - 1 No
3) Euro profile 5 pin cylinder 5701, 70mm key x TT,NP finish - 1 No
4) Lever handle LT 001, 19mm dia with roses and escutcheion SS 304,SSS finish - 1 Nos
5) Surface door closer 9903 with standard arm, silver finish - 1 No
6)Gasket, Fire rated 4mm thick X 13mm , Black - 2 Nos
7)Clear fire rated glass 6mm, 120 min of size 200 mm X 300mm - 1 No
8) Installation kit : Fixing shield and other misc. items | 160 | Sqm | 13,000 ₹20.8 L | 10,517 ₹16.8 L |
| 2.00 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.
All works above plinth and upto floor V level
Concrete of M20 grade ( 1 : 2 : 4 ) | 3 | Cum | 12,000 ₹36,000 | 8,200 ₹24,600 |
| 3.00 | CEMENT PLASTERING:Cement plastering for internal wall and ceiling with cement mortar 1:4 finished smooth with neeru over brick walls or concrete surfaces including hacking the concrete surfaces at all floors and levels in quantities as required at site Including scaffolding curing etc. complete all as directed by Engineer in charge ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )
20 mm thick for wall | 50 | Sqm | 1,800 ₹90,000 | 485 ₹24,250 |
| 4.00 | Labour charge only for removing existing door shutter with freame of all sizes including removing of all fittings & hardwares and handover the same to the Engineering department etc. complete all as per specified and directed by Engineer-In-Charge
Removing door frame with shutters all sizes | 250 | Sqm | 1,300 ₹3.3 L | 150 ₹37,500 |
| 5.00 | Labour charges for shifting all removed doors and frame as per the guidelines of Engineer In charge
Helper | 10 | Nos | 1,300 ₹13,000 | 1,000 ₹10,000 |
Updated dates
Tender Value
₹47.2 L
EMD Value
₹94,340
Closing Date
3 Apr 2026, 6:55 pmClosed
OIC, Engineering TMC on behalf of Director, TMC
Engineering Department, 6th Floor, Service Block, TMH, Parel
Providing and installation of 2 hrs fire rated hollow metal fire door at Emergency exit and Electrical shaft of Annex Building
2026_TMC_902059_1
FireRated Hollow Metal Door/59
Open Tender
Civil Works
90 days
TMH, Parel
As per tender document
5 documents required · 5 mandatory
₹0
₹94,340
TMH, Parel
15 May 2026
12 Mar 2026
6 Apr 2026
12 Mar 2026
3 Apr 2026
27 Mar 2026
12 Mar 2026 - 17 Mar 2026
18 Mar 2026
Contact person
Average last 3 consecutive years
M/s. Company Name WO No. / LOI No / Agreement No. dated Subject Amount Rs. (Location of site)
M/s. Company Name WO No. / LOI No / Agreement No. dated Subject Amount Rs. (Location of site)
M/s. Company Name WO No. / LOI No / Agreement No. dated Subject Amount Rs. (Location of site)
Item Rate BoQ
BoQ_Ver3.0
NIT No. TMC/ENG/Civ/FireRatedHollowMetalDoor/25-26/e-NIT/59 dated 12/03/2026
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.82 MB
techdocumentchecklist.xls
Tender Documents • 0.03 MB
BOQ_948154.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid