REPAIRS TO PLASTER FLOORS TILING AND OTHER ASSOCIATED BR NATURE WORKS UNDER AGE BR II (W) OF GE (W) AGRA

Amount

Taking down cement plaster on brick or stone walls including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 10mm thick on fair faces of brick work in cement mortar 1:3 on ceiling finished even and smooth w/o using extra cement complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work in cement mortar 1:4 on wall, mixed with WPC as per manufacturer's instructions, finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for 15mm thick (top layer) washed stone grit plaster on exterior wall in CM 1:1/2:2 ( 1 cement :1/2 coarse sand : 2 stone) (using 10mm marble chipping) in panels over and including an under layer of 12mm thick cement plater in CM 1:4 duly furrowing with scretching tool and applying cement slurry @ 3Kgs per/Sqm with provision of groove all around as per approved pattern including scrcbbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note : - Grooving shall be measured and paid separately under serpective item here-in-after ).

M&L for forming groove of uniform size 15mm wide and 15 deep in the top layer of washed stone girt plaster as per approved pattern using wooden battens ,nailed to the under layer including removal of wooden battens repair to the edges of panes and finishing the groove complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for two coats of weather proof exterior emulsion (APEX) on new wall including prepartion of plastered surfaces complete all as specified and directed.

M&L for applying two coats of cement based paint on old decorated plstered or unplastered surfaces of wall including preparation by complete removal of existing treatment, complete all as specified and directed.

M&L for two coats of weather proof exterior emulsion (APEX) on walls including complete removal of existing treatment and preparation of surface complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10cm including preparation complete all as specified and directed.

M&L preparation of newly plastered wall surfaces and apply two coat of cement base paint over a coat of white cement / primer complete all as per specified and directed.

M&L for three coat of white wash on ceilling including preparation of newly plastered complete all as per specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) in coping, chajjas kneelers apex stone and curves and the like incl weathering, slightly rounded or chamfered angle etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in any situation and any position including suporting mechenism (any type) if any complete all as specified and directed.

S&F sand stone slab 50 mm thick as in sun shades, chhajas, shelves, landings cover stone etc n.exc 2mtr in length, set and pointed in cement mortal 1:4 complete all as specified and directed.

M&L for mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), complete all as specified

M&L glazed ceramic tiles coloured 350x250mmx7 / 300X450 x 5 to 6mm thick in dado and skirting etc and jointed in neat cement slurry incl and over and including 10mm thick rendering in CM 1:4 and pointed in colour cement to match the tiles complete all as spfd and directed.

M&L for non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tile laid over and including 15mm thick cement screeding in CM (1:6) complete all as specified and directed.

M&L for non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tile laid over and including 15mm thick cement screeding in cm (1:6) complete all as specified and directed.

M&L non – skid colored ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but n exc. 0.38 sqm in floor set in neat cement slurry and pointed in colour or white cement to match with the shade of the tile laid over and inlcuding 15mm thick cement screeding in CM (1:6) complete all as specified and directed.

M&L vitrified ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match laid over 15mm thick cement screed in cm (1:6) complete all as specified and directed.

M&L for vitrified ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, on vertical surfaces such as skirtings, dados and risers to steps etc and jointed in neat cement slurry incl and over 10mm thick rendering CM 1:4 and pointed in colour cement to match the tiles complete all as spfd and direrected.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring, finish cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in sub floors, sub bases etc for receiving the top layer finish the surface even and rough complete all as specified and directed.

M&L for pre-polished, machine pressed chequred cement concrete coloured tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry with mixer of white cement &pigment as in floors / pavements / paths, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, laying floor finishes.complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick surfaces of wall finished surface fair & even complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over and icluding a coat of primer complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint on new steel surfaces over one coat of red oxide primer having width/girth exceeding 10cm including preparation complete all as specified and directed.

M/s Shrangi Rishi Construction

Chandra bhan agrawal

yash constructions

M/s J S & SONS

Asha Construction