REPAIR MAINT OF FLOORING, HARDSTANDING, ROOF REPAIR ETC IN THE AREA OF AGE BR-I UNDER GE AYODHYA

Amount

Taking down cement or cement lime plaster on brick work or concrete surfaces of any description including raking out joints, hacking for key, scrubbing down with water to receive plaster and rubbish off the premises etc complete all as aspecified and directed.

M&L for 10mm thick rendering in cement mortar (1:4)on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as aspecified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surface as in ceiling, finished even and smooth without using extra cement complete all as aspecified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper (OBD) over a layer of 2mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing decorative treatment of any description on walls and applying two coats of oil bound distemper (OBD) over a layer of 2mm thick wall care putty complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying two coats of oil bound distemper (OBD) complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid Ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in flooring over and including 15mm thick screed bed in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for non-skid Ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in flooring over and including 15mm thick screed bed in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for non-skid Ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in flooring over and including 15mm thick screed bed in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x250x 7 mm/ 450x350x7mm thick in vertical surfaces over and including 10mm thick rendering in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description, fixed in any position complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc 6 m mean radius complete all as specified and directed.

S&F mild steel framed work as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks & similar work conforming to Fe.290.Gde-E-165 including all necessary welding etc complete all as specified and directed.

S&F mild steel framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, etc., drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Gde Fe 290 Gde E-165 complete all as specified and directed.

M&L for preparing new steel and iron surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for PCC (1:3:6) Type C1 (using 20 mm graded stone aggregate) as in cills, coping, bed plates and similiar works including necessary work form work and fair finishing the exposed surfaces complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 100 mm thick plain cement concrete (1:3:6), type C-2 (using 40mm graded stone aggregate) as in sub base and Pavings etc complete as specified and directed.

M&L for sand filling under floors, foundations or cushioning including watering and consolidation complete all as specified and directed.

M&L for 80mm thick machine pressed precast coloured concrete interlocking paver block of any shape and size, made of cement concrete M-35 grade, conforming to IS-15658-2006 with grey cement and pigment, laid over sand cushioning complete all specified and directed. Note: Colour & Pattern of tiles shall be approved by GE and sand for cushioning shall be measured and paid for separately.

M&L for chequered cement concrete tiles set of size 20cmx20cmx25mm thick with grey cement and pigment, laid over and including 15mm thick screed bed in cement mortar (1:6), jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6), type C-2 (using 40mm graded stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surfaces even and smooth without using extra cement complete as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in soft/loose soil complete as specified and directed.

M&L for PCC (1:4:8) type D2 ( using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

S&F TMT steel bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F TMT steel bars 6mm to 8 dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as in stirrups, rings and binders complete all as specified and directed.

Use and waste form work to sides of concrete foundations, footings, plinth beams etc, vertical or to batter for rough finished flat concrete surfaces complete all as specified and directed.

Use and waste form work to sides of pillars, posts, struts, piers, columns and the like for fair finished flat concrete surfaces complete all as specified and directed.

M&L for RCC (1:2:4) type B1 as in foundation, footings, foundation beam, plinth beams and bases of columns, basement slabs and mass concrete complete all as specified and directed.

M&L for RCC (1:2:4) type B1 (using 20mm graded graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance exc 50 mtr but n.exc 250 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for 16-18 mm thick machine cut granite tiles (of any type) fixed in vertical surfaces as in skirting/dado over and including 15mm thick rendering coat in cement mortar (1:4), set & jointed in neat grey cement slurry and pointed with white cement with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S&F mild steel framed brackets of angles or tees with web and flanges, cut to shape, drilled & countersunk for screws including bending & welding angles as necessary, gusset plates, riveting etc n.exc 10 Kg each brackets, conforming to Fe 290 Gde-E-165 (brackets over 10 Kg each to be measured under 'structural steel') complete all as specified and directed.

S&F anodised aluminium snap grid framed work for false ceiling including hangers 6mm dia GI wire adjusting level fixed to roof slab by means of ceiling cleats made out of G.I. Flat 40 X 3 mm size 60mm long and expansion hold fasterns 12.5mm dia 40mm long complete all as specified and directed.

M&L for 12mm thick perforated particle board/tiles of size 60cmx60cm for insulation and accoustic purposes, fixed with screws to timber frame work or with staples on snap grid complete all as specified and directed Note: Colour and Pattern shall be approved by GE.

S&F 4 mm thick Asbestos Cement Plain building boards, fixed to timber frame work with screws as in flat ceiling complete as specified and directed.

S&F in repairs, 4 mm thick Asbestos Cement Plain building boards, fixed to timber frame work or snap grid with screws as in flat ceiling complete as specified and directed.

S&F in repairs, solid PVC wall linning consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame for PVC wall lining as per specification and drawings complete as specified and directed.

Taking down chowkats or frames n.exc 1.50 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.50 Sqm but n.exc 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

M&L for 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed complete as specified and directed.

S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commericial type on both sides with decorative faces veneer with lipping/frame to match complete all as specified and directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing complete as specified and directed.

S&F 300mm long brass sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperature 1.40 and fixed with stainless steel wire staples complete as specified and directed.

S&F 150mm size floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring, fixed in floor complete as all as specified and directed.

S&F 100mm long butt hinges cast brass with mild steel hinge pin, bright polished and fixed type B-11, medium weight and fixed to chowkats complete all as specified and directed.

S&F 150mm long brass handles, fabricated type, polished bright complete all as specified and directed.

S&F 200mm long brass barrel tower bolt with extruded section, polished bright, complete all as specified and directed.

S&F 100mm size brass mortice lock vertical type 2 levers complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connections including cleaning for re-fixing or removal to store and S&F 20 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete as all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connections including cleaning for re-fixing or removal to store and S&F 15 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete as all as specified and directed.

S&F in repair, vitreous china wash hand basin of size 610x460x150mm including sensor pillar tap and bottle trap of approved make complete all as specified and directed.

S&F in repairs, EWC 500x360x300mm wall mounted water closet including seat cover white and all necessary fittings of approved make including connection to trap etc complete all as specified and directed.

S&F in repairs, Concealo Neo flush tank 80mm full frame and accessories of approved make, connection to flush pipe of any description complete all as specified and directed.

S&F in repairs, ceramic urinal pot of size 370x390x610 mm with with in-built sensor type of approved make, connection to iron pipe and waste pipe complete all as specified and directed.

S&F in repairs, rectangular shaped urinal partition of 8mm thick frosted glass of size 900x450mm and fixed in position with & including necessary cleats etc complete all as specified and directed by Engr-in-Charge.

S&F aluminium window/ventilator made out of extruded powder coated aluminium sections with sliding or openable shutters including frame and necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, Star lock, hooks & eyes peg stays, rubber beading and handles including connected items with and including, making good for dismantling portion in PCC (1:2:4) or in cement mortar (1:3) complete all as specified and directed. Note :(i) Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors.

S&F 3mm thick frosted sheet glass of ordinary quality, fixed in panes n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs, 5mm thick looking mirror of size 1000x600mm including stainless steel nuts & bolts wirh rubber washer complete all as specified and directed.

S&F in repairs, 600mm long 20mm dia brass chromium plated towel rail complete all as specified and directed.

S&F in repairs, brass chromium plated towel ring complete all as specified and directed.

S&F in repairs, 75 mm dia, PVC (SWR) single socketed rain water pipe, fixed to walls in any length with rubber ring joints including necessary clamps complete all as specified and directed

S&F in repairs, 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as spicifed and directed.

S&F in repair 15mm dia bore bib tap two in one chromium plated complete all as specified and directed.

S&F in repair, 15 mm dia bore cast copper alloy angle valve / stop valve with wall flange, fancy type, cromium plated, screwed down both ends for iron pipe complete all as specified and directed by Engr-in-Charge

S&F in repairs, glass corner with chrome finish shelf of size 9 inch x 9 inch for bathroom complete all as specified and directed.

S&F in repairs, soap dish chromium plated fancy type, fixed with brass screws complete all as specified and directed.

S&F in repair, chromium plated health faucet for pedestal pattern WC, screwed down high pressure including 1.00 m long flexible CP pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 25mm dia mild steel curtain rail, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and directed.

Use & waste form work to sides and soffit of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangings etc, also splays between floor and beam for fair finished flat concrete surfaces complete all as specified and directed.

M&L for RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beam and colums in floors, roofs, landings, deck slabs, shelves and the like complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets in roof covering complete all as specified and directed.

S&F 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F AC two piece adjustable serrated ridge for corrugated or semi corrugated sheet, fixed with L- type or J-type hook or cranked hook bolt with washer complete as specified and directed.

S&F 0.50mm thick Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.50mm thick Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

K R KAUSHAL AND SONS

JYOT BUILDERS

ABC CONSTRUCTION CO

Jairajyadav security services

AIRDOT ENGINEERING