REPAIR TO PLUMBING ,SAINTARY, FITTINGS IN OMQ AND SMQ AREA AND REPAIR TO FLOORING AND CERTAIN REPAIR IN DOMESTIC AREA AT AF STN JAISALMER

Amount

Galvanized steel water tubing medium grade of 15mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.

CPVC 16 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old unserviceable existing tubing and connections complete all as specified.

Galvanized steel water tubing medium grade of 20mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.

Galvanized steel water tubing medium grade of 25mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.

Cutting chases, pinning in, making good to facings as original where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth in stone concrete blocks or slabs complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 500 Litre capacity triple layered (white cylindrical vertical with closed top) ISI marked, hoisted & fixed in position with 20mm bore ball valve of high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water storage tank complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 1000 Litre capacity triple layered (white cylindrical vertical with closed top) ISI marked, hoisted & fixed in position with 20mm bore ball valve of high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water storage tank complete all as specified and directed.

20mm dia ball valves, high pressure of PTMT (Polytetra methylene terephthalate) with epoxy coated aluminum rod & high density plastic ball and fly nut, screwed for iron pipe (minimum weight 210 gms) fixed as in repair complete all as specified and as directed.

15mm bore chromium plated bib taps fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repairs complete all as specified and directed.

15mm bore fancy type chromium plated pillar taps long neck/swan neck,cast copper alloy with capstan heads, screwed down high pressure with long screwed sharks and fly nuts screwed down for iron pipes etc and fixed as in repair complete all as specified and directed.

15mm bore brass chromium plated angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair complete all as specified and directed.

15mm bore stop valve fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed.

Brass chromium plated shower rose (ISI marked) 75mm size with or without swivel joints , including fixing to steel pipe or union, supplied and fixed as in repairs complete all as specified and as directed .

PVC connection suitable for 15mm bore with PTMT nuts of 600mm length and fixed as in repair complete all as specified and directed.

32/40mm bore spring type PVC waste pipe min length 0.70 RM fixed to WHB & sink etc fixed as in repair complete all as specified and directed.

PVC Cover heavy duty for PVC water storage tank of capacity 500/1000 litres ISI marked fixed as in repair complete all as specified and directed.

Gun-metal Gate valve 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as in repair complete all as specified and as directed.

Repairing the Floor trap by demolition of floor concrete or sub base concrete around the trap of size 30 x 30 cm to the required depth (bottom of the trap) and providing PVC SWR pipe from trap to top portion upto grating and finishing the same with cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) complete all as specified and directed .

Treating the seepage by filling FOSROC nitotile grout (or equivalent of sikka/Aidilite ) in tiles gaps, WC, bathroom and kitchen contact area and applying Fosroc (or equivalent) brushbond chemical for seepage wall surface over plaster and grouting the affected area/Place with use of Fosroc renderoc plug chemical (or equivalent) including plaster as per directedor as per manufacturer instruction includes plaster and other connected works complete all as specified and directed.

Vitreous china squatting pan 'Orissa Pattern' of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete including jointing and making good to floor provision of PCC 1:5:10 bed as in repairs including dismantling old unserviceable complete all as specified and directed.

Vitreous china wash down water closet pan (Pedestal pattern), white colour, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic water closet seat cover (white colour) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as in repair complete all as specified and directed.

Corner wash basin without pedestal Vitreous China white flat back of size 400x400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and proclain stopper with brackets including taking down old unserviceable existing complete all as specified and as directed.

Vitreous china wash hand basin white colour flat back of size 550x400mm including cutting for and pinning in ends of or erecting stand including waste fitting, brass chromium plated 32mm size with longh with including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10x7.5x15cm with including dismantling and taking down old unserviceable complete all as specified and directed.

10 Litres capacity PVC valve less syphonic action type, flushing cistern low level, white coloured, with inlet, ball valve, float and handle including brackets complete with flush pipe fixed as in repair complete all as specified and directed.

Snow white vitreous china EWC single peice type 700X370X645 mm incl seat cover and flush fittings complete fixed in floor with brass screw fixed as in repair complete all as specified and directed Make : JAQUAR CAT Part No: SLSWHT-6851P or equivelent of Parryware,Johnson Pedder

SS grating of square/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as specified and directed.

15mm bore brass chromium plated wash hand basin mixer long swan neck for mixing hot & cold water screwed down for iron pipe and fixed as in repair complete all as specified and as directed.

15mm bore brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe fixed as in repair complete all as specified and as directed.

Precast cement concrete (1:3:6), type C-1 (using 20 mm graded stone aggregate) solid block masonary exc 10cm in width and set in cement and sand mortar (1:4), including demolition of existing masonary of any type complete all as specified and directed.

10mm thick internal plaster in cement mortar (1:6) on internal wall surfaces finished even & smooth, without using extra cement including taking down old plaster complete all as specified and directed.

5mm thick ceiling plaster in cement mortar (1:3) on uneven faces of concrete surfaces of ceiling soffits of chajjas/ drop & roof projectiom facia etc , including taking down old plaster complete all as specified and directed.

5mm thick Ready mix plaster of make cement as per Appx 'B ' on concrete surfaces on ceiling finished even and smooth complete all as specified and as directed

Rendering 15 mm thick on external surface of wall in cement and sand mortar 1:4, mixed with water proofing compound as per manufacturer’s instructions,of make ;-FOSROC/STP/SIKKA or other equivalent make complete all as specified and as directed Note :- Supply only of integral liquid water proofing compound shall be measured and paid for separately under appropriate item of this schedule).

Supply only Liquid water proofing compound STP No-1 Dr. Fixit or equivalent complete all as specified and directed.

Preparation of newly plastered surfaces or unplastered surface of walls and applying two coats of oil bound distemper over a coat of chalk whitening complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces of ceiling surfaces and applying three coats of white wash on ceiling, soffit of chajjas /drop and roof projection facia complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of over a coat of alkali resitant primer complete all as specified and directed.

Non Skid coloured ceramic tiles 8mm to 9mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed

Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed

Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) same as per floor tile on vertical surfaces as skirting etc over 10mm thick in cement and mortar (1:4) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling of existing tiling with cement mortar bedding complete all as specified and directed.

Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed

Glazed colouredceramic tiles in dado/skirting 300x450x6-7mm / 350mm x250mm x6-7mm thick on vertical surfaces, dado and skirting over and including 15mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling of existing tiling with cement mortar bedding complete all as specified and directed

PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement and jointing to waste pipe fixed in cement concrete type B-1:2:4 fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) Junction Single (Single Y) equal or unequal provided with access door fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

Stainless steel kitchen plate rack 1.00mm thick sheet of size not less than 900x750 x250mm fixed with stainless steel screw on wall properly fixed as in repair complete all as specified & directed

Stack clamp made out of MS flat 50 mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 110mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces fixed in repair complete all as specified and directed.

Stack clamp made out of MS flat 50 mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 75mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces fixed in repair complete all as specified and directed.

Vitrified ceramic tiles 9mm to10mm thick (square/rectangular), polished, coloured (Dark shade as approved), area of each tile not exceeding 0.36 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:6 including dismantling of existing tiling with cement mortar bedding complete all as specified and directed.

Vitrified ceramic tiles 9mm to10mm thick (square/rectangular), polished, coloured ( Dark shade as approved) on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with floor tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 including dismantling of existing tiling with cement mortar bedding complete all as specified and directed.

10mm thick, size 300x300mm coloured endura parking tiles over and including 15mm thick screed bed in cement and sand mortar 1:6 including dismantling of existing tiling with cement mortar bedding complete all as specified and directed .

75mm thick Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection and provided joints 10mm wide & full depth at 3m distance and every change of direction filled with sand and bituminious mix 1:3 including demolition of existing concrete complete all as specified and directed.

25mm thick Plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling coarse in flooring, finished even and rough including demolition existing concrete complete all as specified and directed.

100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finishing cement concrete surface fair and even including demolition of existing concretecomplete all as specified and directed.

Precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in kerbs stone and the likes including weathering, slightly rounded or chamfered angles and throating including jointed ,pointed in cement mortar 1:4 embeding in the ground including demolition of existing concrete complete all as specified and directed.

Preparation of newly surface of road side kerb stone and applying two coats of water base road marking paint complete all as specified and directed.

60mm thick,interlocking paver block M-35 grade machine pressed factory made rubber moulded precast concrete any shape and size conforming to IS-15658-2006 of with grey cement with pigment including 25mm thick machanicaly compacted thickness of sand bedding below paver tiles laid to required level & slope and dismantling of existing tiling with cement mortar bedding complete all as specified and directed.

Factory made coloured Rubber moulding chequered cement concrete tiles,25cmx25cmx25mm / 30cmx30cmx25mm thick,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigment,over & including 15 mm thick screed bed in cement & sand morter 1:6 including dismantling of existing tiling with cement mortar beddingcomplete all as specified and directed.

18mm to 20mm thick granite stone work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement and sand mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm cement screed bed in cement and sand mortar 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including dismantling of existing stone slab bedding complete all as specified and as directed.

Machine cut kota stone slab flooring 18 mm to 20mm thick laid as in floors in squares or rectangular pattern laid over 15mm thick cement screed bed in cement and mortar (1:6) set and jointed in neat cement slurry and pointed coloured cement to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down shutters any description area exceeding 1.00 sqm each but not exceeding 2.00 sqm each complete all as specified and directed.

35 mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & as directed

Factory made Second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or founded, fitted with cut and mitred beads for securing glass or wire cloth any number, etc sizes of members of shutter as specified in SSR Part-I complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for stiles and for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

100mm Butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.

Aluminium handle 150mm long cast type, fabricated type, anodized complete all as specified and directed

150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and complete all as specified and directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed.

Preparation of newly surfaces of wood or wood based material of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

S K TRADER

prem enterprises

Leelashah Enterprises

GEMRARAMCONTRACTOR