Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹9.2 L+₹2.3 L (32.3%)Rejected-Finance MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than lowest bid |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
13 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (West) Jalandhar Cantt
Kabir Road Jalandhar Cantt.
PERIODICAL SERVICES IN OTM AND MD ACCN OF A1 AREA IN AOR OF AGE B/R-1 UNDER GE (WEST) JALANDHAR CANTT
2022_MES_552570_1
GE/JAL(W)-50/2022-23
Open Tender
Civil Works
Item Rate
335 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (West)
₹20,000
Yes
22 Oct 2022
17 Sept 2022
19 Oct 2022
17 Sept 2022
13 Oct 2022
1 Oct 2022
Amount
Material & labour for prepration of old surfaces of walls and applying one coat of colour(lime) wash on wall complete all as specified and directed by Engr -in-charge.
Material & labour for prepration of old surfaces of ceiling and applying one coat of white(lime) wash on ceiling complete all as specified and directed by Engr -in-charge.
Material & labour for prepration of old surfaces of ceiling and applying two coat of white (lime) wash on ceiling complete all as specified and directed by Engr -in-charge.
Material & labour for prepration of old decorated surfaces of walls including, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying two coats of exterior acrylic emulition paint as per manufacurers instructions and directed by Engr -in-charge. (Note :- work to be executed in buildings of height upto 22 mtr )
Material & labour for prepration of old decorated surfaces of walls, washing rubbing down and stoping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed by Engr -in-charge.
Material & labour for complete removal of existing treatment by washing, rubbing down and stopping etc on wall and applying two coat of oil bound distemper over one coat of primer complete all as specified and directed by Engr -in-charge.
Material & labour for prepration of old surfaces of walls and applying one coat of birla white putty and finished smooth complete all as specified and directed by Engr -in-charge.
Material & labour for prepration of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed by Engr -in-charge.
Material & labour for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surfaces and applying two coat of cement base paint complete all as specified and directed by Engr -in-charge.
Material & labour for prepration of old concrete surfaces and applying one coat of synthetic enamel paint on kerb stone complete all as specified and as directed
Material & labour for complete removal of existing treatments and applying two coat of plastic emulsion paint over a coat of primer on asbestos cement complete all as specified and as directed
Material & labour for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.
Material & labour for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.
Taking down cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified
Material & labour for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified
Material & labour for 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished fair and even without using extra cement all as specified
Material & labour for 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified
Material & labour for two coats of colour wash on newly plastered surfaces of wall over a coat of white wash including preparation of wall surfaces complete all as specified and directed by Engr -in-charge.
Material & labour for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engr -in-charge.
Material & labour for preparing new plastered or unplastered wall surfaces and applying two coat of cement base paint over one priming coat complete all as specified and directed by Engr -in-charge.
Material & labour for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engr -in-charge.
Material and labour for writing lettersor figures (Block, Roman, Italic or Indian) n exc 30 cm high with black, thick paint all as specified and directed by Engineer-in-Charge.
Uprooting of trees, grass bushes etc from brick wall/roof/ other Part of building including dismantling the required brick work/ roof tiles /mud/concrete etc for uprooting the vegetation etc and make good the same to match with existing surface with same material or concrete 1:2:4 after pouring the chemical (Which destroy the growth of vegetation to the place where vegetation remove.The rate for scaffolding or any other arrangement required during this process upto 10 mtr height shall deem to be included in quoted rates against this item .
Removing existing paint by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) having RPM between 600-1500, sanding paper of 60/80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed by Engineer-in-Charge.
Providing and applying white cement based putty @ 1.0 Kg (undiluted) per sq mtr. of average thickness 1 mm, of Asian Paints or any other approved make over the plastered/ old painted wall after scrapping to prepare the surface even and smooth complete. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute) or equivalent Step 2 : Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine (Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of 6 ltrs per minutes with a maximum pressure 227 bar having maximum tip size 0.039" Step 3: Allow 6-8 hrs time to dry the putty surface. Step 4: Apply second coat of the prepared mixer manually to make to smooth to make the finish even. Step 5: Allow 6-8 hrs time to dry the putty surface complete all as specified and as directed by Engineer-in-Charge.
Sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM between 600-1500, sanding paper of 180 Grit having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed.
Providing and applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min.1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between both the coats of paint complete all as specified and as directed by Engineer-in-Charge.
Providing and applying two coats of cement based paint @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between both the coats of paint complete all as specified and as directed by Engineer-in-Charge.
Material & labour for repairing of RCC projections, chajjas, roofs, facia etc by necessary preparation scarpping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggrigates and reinforcement with welded mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and work in patches area n.exc 5 sqm each and thickness of RCC member n.exc 70mm including necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engr-in-charge. (Note : The unit rates quoted against this item shall deem to include cost of welded mesh and nothing extra shall be admissible on this account) Note :- Height upto 10 mtr
M/s GURFATEH BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .