SPECIAL REPAIR/ MODIFICATION OF HAIR DRESSING AND SPECIAL REPAIR OF ROOF TREATMENT TO BLDG NO P-327 (JCO SINGLE LIVING ACCN) UNDER AGE B/R-III OF GE (S) JAIPUR

Amount

06/SR/61SA/BLDG/2021-22/Q3W Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement. (Note: WPC shall be measured and paid seperately)

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions.and finally applying one coat of Bitumen coat @ 1.2 Kg/Sqm over APP Membrane before application of Aluminium paint

M&L one coat of silvar paint over APP Membrane all as specified and directed by Engineer -in - chage

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including Dismantling water tanks & removing to store. 06/SR/61SA/BLDG/2021-22/Q3W: 1 02/SR/61SA/BLDG/2021-22/Q3W: 1

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity including Dismantling water tanks & removing to store

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed in repair. 06/SR/61SA/BLDG/2021-22/Q3W: 3 02/SR/61SA/BLDG/2021-22/Q3W: 1

M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of thank of PVC cylindrical water tank of capacity 500/1000 liters using PCC 1:3:6 type c1 using 20mm graded stone aggregate with smooth finish 06/SR/61SA/BLDG/2021-22/Q3W: 3 02/SR/61SA/BLDG/2021-22/Q3W: 1

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore 06/SR/61SA/BLDG/2021-22/Q3W: 50 02/SR/61SA/BLDG/2021-22/Q3W: 3

20 mm bore 06/SR/61SA/BLDG/2021-22/Q3W: 30 02/SR/61SA/BLDG/2021-22/Q3W: 2

Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM. 06/SR/61SA/BLDG/2021-22/Q3W: 350 02/SR/61SA/BLDG/2021-22/Q3W: 70

M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified. 06/SR/61SA/BLDG/2021-22/Q3W: 150 02/SR/61SA/BLDG/2021-22/Q3W: 40

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even complete all as specified 06/SR/61SA/BLDG/2021-22/Q3W: 250 02/SR/61SA/BLDG/2021-22/Q3W: 15

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling finished even and smooth without extra cement complete all as specified 06/SR/61SA/BLDG/2021-22/Q3W: 100 02/SR/61SA/BLDG/2021-22/Q3W: 15

Hacking out old broken glass pane (any thickness, size, quality/ description) from metal/wood frame including punching or drilling out old glass panes, pins, springs, clips & providing & fixing new ones 3 mm thick plain sheet glass ordinary quality in square not exceeding 0.50 Sqm in each pane. glazed with oil putty.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

M&L 50 mm thick PCC (1:3:6) type C-1, using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection

Supply only Integral water proofing compound

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls including taking down

S&F PVC (SWR) bends any radius 110mm dia including taking down

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls including taking down

S&F in repair Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions.

All as per item No 21 above but of 25mm bore

Preparation of new plastered surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying two coat of oil bound distemper all as specified and directed. 06/SR/61SA/BLDG/2021-22/Q3W: 150 02/SR/61SA/BLDG/2021-22/Q3W: 40

Preparing new plastered surfaces including scrapping and applying three coat of white wash on ceiling. 06/SR/61SA/BLDG/2021-22/Q3W: 100 02/SR/61SA/BLDG/2021-22/Q3W: 15

Preparation of new plastered surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying two coat of cement base paint all as specified and directed by Eng-in-Charge. 06/SR/61SA/BLDG/2021-22/Q3W: 250 02/SR/61SA/BLDG/2021-22/Q3W: 15

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. 06/SR/61SA/BLDG/2021-22/Q3W: 120 02/SR/61SA/BLDG/2021-22/Q3W: 23

S&F Coloured Glazed ceramic tilessize 300x450mm x 7mm thick edge cut/ joint free , on walls etc. set & jointed in neat cement slurry & pointed in white/coloured cement to match over and including 15mm thick plaster in CM(1:4)

S&F Coloured Non Skid ceramic tiles 6 to 7mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including15mm thick screed in CM(1:4)

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm but including brackets, coupling and waste pipe complete

S&F in repairs stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type), 15 mm

S&F in repair brass CP Angle stop cock fancy type concealled type long body,15 mm bore

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed-15mm. 06/SR/61SA/BLDG/2021-22/Q3W: 2 02/SR/61SA/BLDG/2021-22/Q3W: 1

S&F in repair 15 mm bore Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body complete.

S/F in repair PVC connections 15mm size with PTMT nuts of length 300mm

M&L Chromium plated Overhead Rain shower with relvoling joint and 115mm long shower arm with wall flange 15 mm bore fancy type any colour half turn (Make-Parryware, Hindware, Jaquar or equivalent) fixed in repair

S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Lit capacity ( Make-Parryware, Hindware, Jaquar or equivalent) fixed in repair

Dismantling of old U/S grating of any description or size and S&F PVC grating 125mm dia of weight not less than 40gm for floor trap / Nahani trap.

S&F in repairs vitreous china water closet Indian type 580 x 440 mm white with itergal footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as directed including flushing cistern and flushing pipe

S&F Soap dish vitreous china white approximate size 160 x 160 x 90mm equivalent

02/SR/61SA/BLDG/2021-22/Q3W S&F light shade Vetrified Ceramic tiles edge cut 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) .

All as per item no 41 but on Vertical surface such as Skirting/ dado etc including 15 mm thick Cement plaster in CM ( 1:4) on stone masonry surface or other than fair face of Brick masonry.

S&F in repairs PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge. Make - PRAYAG/SIMET

M&L Towel ring of brass CP Squar flange (Make-CERA CAT PART NO CQ 102 or equivalent of MARC, JAQUAR) and fixed in repairs

M&L Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore any colour (Make-CERA CAT PART NO CQ 608 or equivalent of MARC, JAQUAR) fixed in repair

M&L CP cast copper alloy bib taps Long body with wall flange fancy type of 15 mm bore quarter turn (Make-CERA CAT PART NO CQ 604 or equivalent of MARC, JAQUAR) fixed in repair.

S&F in repairs Vitreous China wash hand basin flat back basin including half pedastal CERA Part No 1071 CYRCSS white / , coloured, , size 610x560mm including CP waste coupling but excluding taps, waste chain & plug & ( Make-Make-CERA, HINDWARE/ PARRY WARE or equivalent

S&F Waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed(Make-MARC CAT PART NO MAC 3020 or equivalentof CERA JAQUAR) fixed in repair

S&F CP bottle trap with internal partition 32 mm size with 300 mm X 190 mm long wall connection pipe and wall flange for WHB (Make-Make-CERA CAT PART NO CM 104 B or equivalent of MARC, JAQUAR) fixed in repair

Dismantling of old U/S grating and M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap.( Make Paryag and equilant )

S&F Soap dish brass CP ((Make-CERA, MARC, JAQUAR or equivalent) fixed in repair

S&F Cast Iron sand cast soil, waste and vent pipe 75mm bore in any length with or without ears with cement joints fixed to walls including taking down existing pipe.

S&F Cast Iron bends any radius 75mm dia

S&F in repairs Cast Iron branch pieces single, (Single T) equal or unequal 75mm dia including taking down existing pipe.

S&F Cast Iron cowl 75mm dia

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement

S&F in repairs Glass corner of best quality (as per sample)

M/L for Fancy type MS bracket suitable for curtain rod fixed in repair

M&l 20 mm dia Drapery Fancy type curtain rod fixed in repair

M&L Fancy type caps/ side Bulbs PVC powder coated suitable for curtain rod fixed in repair

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, . or extruded sections & fixing bolts & sliding bolts of extruded sections or . aluminium alloy.

S&F Aluminium handles 125 mm size, . type, anodised

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door as directed.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)

Aluminium anodised frame fixed type with aluminium section weighing 0.55 Kg/Mtr including necessary joining, , cleats, glazing clips, rubber packing anodised aluminium snap beading, screws etc complete all as specified.

S&F Anodised aluminium window sliding shutter three track way type without sash bars' aluminium sections weighing 0.55 kg/m including necesssary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitttings such as peg stays 150mm long (1No) hinges type B-21, 100mm long (2 no) suitable handle (1 no) with complete accessories including glass, wiremesh, anodised aluminium guard bar, Andosided aluminium frame (chawkhats) and all accessories and fittings etc all as deirected by Engr-in-charge Make Jindal/hindalco

S&F powder coated aluminimum anodised door/window shutter openale / sliding type with aluminimum section weighing 0.55 kg/mtr incl necessay joining , cleats, glazing clips , rubber packing anodised aluminimum snap beading , screws handle tower bolt etc complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M&L double action door spring hydraulically regulated mde up of minimum 1.25 mm thick alumunumum alloy , sheet foumdation box main body with stainless steel cover governing pivot made of brass and other parts made of steel heavy duty and fixed complete all as specifiedand directed

S&F Sheet glass 4 mm thick, ordinary quality in square as required & directed by Engr - in - Charge

M&L for brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6

Demolition of stone/brick masonary built in cement mortar or cement lime mortar

M&L 19 mm thick MDF Membrane Almirah/kitchen cabnaite door shutter in wood grain colour, half round edge fixed in repair

S & F Auto close hinges,stainless steel, bright finish or electrogalvanised fixed in repair

M&L of 19mm thick MDF board in cabinet almirah cub board and partiation and shelf of cabnait including fixed in repair

S&F brass handle of 100mm size . type, polished bright.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

S & F Solid PVC Wall Lining consisting of 5mm thickwood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

Providing and fixing suspended false ceiling using mineral fibre board of size 600 x 600 x 15mm as ceiling over and including suspension metal(galvanised iron) system ) designer grid (15mm grid 8mm return) bevelled tegular suprafine XL 15mm / silhouete complete including necessary hanging system arrangement 6 mm dia suspenders as per manufacture's instruction which is required to be made from existing RCC roof/stone slab of building complete all as specified and directed by Engineer-in-Charge. Make :- Armstrong(ANF RH 90) or equivalent make of Everest , Gypsum India Ltd, Bison and Aerolite.

02/SR/61SA/BLDG/2021-22/Q3W (E/M Portion) Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete including all fittings such as switches, ceiling roses, pendants, sockets, lamp holder, fan regulator brackets light fittings tube light fitting, bell/ buzzer etc (excluding fans) and making good disturbed surfaces of wall floors, ceiling etc complete all as specified and as directed by Engr-in-Charge to match with existing surface.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for the following :-

One light / fan controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets as required for one 16 amp socket outlet point controlled by one switch on independent board.

Supply&.Fix Switch piano type 230/ 250V grade on top covers (catered in point wiring above) of following type:-

Switch piano flush button single pole one way 6 amp complete.

Switch piano flush button single pole one way 16 amp complete.

S&F Socket outlet multipurpose use flush mounting type, 230/250 Volts grade(ISI Marked) on top covers (catered in point wiring above) of following type:-

Socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.

Socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.

S&F ceiling rose 3 plates polycarbonate body complete.

S&F Energy saving envirnmental friendly, LED Light fittings 1 x 20 W 1200mm E lite LED Curve, high lumen batten with efficacy of 100+ lumens , impact proof,surface/wall mounting with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat No LHEXBXPNIN1W020 or equivalent in Syska/Crompton/Bajaj

S&F LED Light fittings 1 x 10W ,240 volt( size-2 feet/600 mm) , long life, corrosion resistant , surface/wall mounting IP 66 luminaire with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat No LHEXARP7PN1W009 or equivalent in Syska/Crompton/Bajaj

S&F Heavy duty exhaust fan 300 mm size ,220/240Volt steel body, 1400 RPM with mounting ring and louvers.including three core flexible PVC insulated multi stranded copper conductor cable of size 1.5 sqmm from ceiling rose/connector to fan Make:- Havells, Model No- turbo force or equivalent of Bajaj/CG

M&L Sub main wiring with two runs of 6 Sqmm single core FRLS PVC insulated but in unsheathed multi stranded copper conductor cable 1100 volts grade drawn through and including of 25mm dia PVC rigid conduit medium with conduit accessories and fixed to the surface of wall/ceiling as per ISI including 6.0 Sqmm PVC insulated copper conductor earth continuity wire.

S&F SP&N 8 ways, Factory made, sheet distribution boards, double door protection class IP-42 suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 r of the under mention rating

S&F MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

SP 5 to 32 amps

SPN 32 to 63 amps.

S&F wall Fan size 450mm, white color, single Phase AC 230 volts complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Bajaj Model Esteem or equivalent

M&L Earthing complete with galvanized steel plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground earth pit not less than 2.25 meter deep below normal ground level with top edge of the plate not less than 1.5m below normal ground level connected to GI Strip 25x 4 mm by means of bolts, nuts, check nuts and washer of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I complete all as specified and testing on completion, including provision of earth strip protected by 32 mm dia GI light grade protection pipe from test point to main board and 32 mm GI medium grade watering pipe funnel, PCC earth pit and RCC cover charcoal, salt and GI wire including excavation and earth work etc complete all as directed at site.

S.R.Enterprises

Shiv Construction Company

UNIVERSAL INFRAPROJECT PVT LTD

M/S JALANDRA CONSTRUCTIONS

J.J.ENGINEERING

M/S Mohan Lal Gupta