Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.5 CrAccepted-AOC | ₹20.5 Cr | L1 | Accepted-AOC Lowest bidder (L1) in financial evaluation. |
| 2 | L2₹22.9 Cr+₹2.4 Cr (11.5%)Rejected-AOC | ₹22.9 Cr+₹2.4 Cr (11.5%) | L2 | Rejected-AOC Not lowest bidder. |
| 3 | L3₹23.5 Cr+₹3.0 Cr (14.8%)Rejected-AOC | ₹23.5 Cr+₹3.0 Cr (14.8%) | L3 | Rejected-AOC Not lowest bidder. |
| 4 | L4₹23.7 Cr+₹3.2 Cr (15.6%)Rejected-AOC | ₹23.7 Cr+₹3.2 Cr (15.6%) | L4 | Rejected-AOC Not lowest bidder. |
Tender Value
₹22.5 Cr
Closing Date
19 Jul 2021, 6:00 pmClosed
SE PHED PROJECT CIRCLE JAIPUR
Office of The Superintending Engineer, PHED, Project Circle, PHED, Jaipur, Sector 26, Near Ayush Bhawan, Pratap Nagar, Jaipur
Bids for the Retrofitting Works of 37 Villages of Banskho IPS under Bassi-Bisalpur water supply project to carry out works of providing Functional Household Tap connections under Jal Jeevan Mission (JJM)
2021_PHCJ_229489_1
NIT NO-05/2021-22/SE PHED PROJECT CIRCLE/JAIPUR
Open Tender
Civil Works - Water Works
Percentage
365 days
BASSI
Please refer Tender documents.
4 documents required · 4 mandatory
₹10,000
EE PHED PROJECT DIV-BASSI/MD RISL JAIPUR
Exempted
In the Office of Chief Engineer (SP), PHED, Jaipur
3 Nov 2021
25 Jun 2021
20 Jul 2021
26 Jun 2021
19 Jul 2021
9 Jul 2021
5 Jul 2021
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | BOQ 1 | - | - | - | - |
| - | Construction of tube well from ground level & up to 100 mtr depth to accommodate housing and assembly pipe of following sizes in all type of alluvium strata unconsolidated formation such as pebbles, boulders etc. by percussion/rotary drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications, with gravel as per IS:4097-1967 and it's packing as per IS: 2800 (Part I & II) 1979 as amended up to date (the work includes the cost of gravel & it's primary packing and packing during development, lowering of housing & strainer assembly pipes with supply and wrapping of coir-rope, wherever necessary for arresting fine sand particles and development work, but excluding the cost of housing and strainer pipe assembly). The work would be completed after obtaining sand free water. | 910 | Rmt. | 1,240 | ₹11,28,400 |
| - | Construction of tube well after completion of drilling by rotary method & upto 150 mtr. depth in all type of rocks by DTH system as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work shall be deemed completed only after obtaining sand free water. The bore well should have a throughout nominal size bore beyond casing pipe. | 1,430 | Rmt. | 1,025 | ₹14,65,750 |
| - | Testing verticality of tube well by plumbing system and yield test and draw down test by pumping system as per IS : 2800 (Part – II) – 1979 or as per amended up to date. | 13 | Each | 7,056 | ₹91,728 |
| - | Supplying & Packing P-gravel suitable for slot size/mesh size as suggested in IS 2800 (Part-I) 1991 with latest amendment. | 41.34 | Cum | 3,200 | ₹1,32,288 |
| - | Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m) | 923 | Rmt. | 1,841 | ₹16,99,243 |
| - | Labour charges for making slots on blank pipes made of ERW MS black pipe of following sizes, the slotting should be as per IS:8110-2000 or as amended up to date. 200 mm dia | 468 | RM | 273 | ₹1,27,764 |
| - | Supply and fixing MS clamp set o 50 X 6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pumpset | 13 | Each | 450 | ₹5,850 |
| - | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. | 13 | Nos. | 750 | ₹9,750 |
| - | Supply & Installation of 3 phase ISI marked submersible motor pump set of five star rating by BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. 7.5 KW (10 HP) & head above 120 mtr. | 390 | KW | 6,620 | ₹25,81,800 |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
BOQ_409135.xls
BOQ Document • 0.58 MB
79288769.pdf
Tender Document • 0.59 MB
TD-05.pdf
Tender Document • 4.41 MB
79288771.html
Tender Document • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .