PERIODICAL SERVICES, CHAJJA, WALLS AND CEILING AND REPAIR PLASTER WORK AT AREA-II UNDER GE KAMPTEE.

Amount

M&L for brooming down surfaces of any description and applying one coat of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc including scaffolding for buildings having height upto G+3 complete all as specified and directed.

M&L for brooming down surfaces of any description and applying two coats of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc including scaffolding for buildings having height upto G+3 complete all as specified and directed.

M&L for brooming down surfaces of any description and applying two coats of white wash on old decorated surfaces of ceiling including preparation of old surfaces & filling cracks and holes etc including scaffolding for buildings having height upto G+3 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed .

M&L rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .

M&L rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .

M&L for preparing newly plastered surfaces of walls/chajjas/lintels and applying two coats of cement base paint (white or tinted) over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint on surfaces of walls by roller including scaffolding for buildings having height upto G+3 complete all as specified and directed.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying two coats of cement base paint on surfaces of walls by roller including scaffolding for buildings having height upto G+3 complete all as specified and directed.

M&L for preparing old plastered surfaces of wall by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of acrylic distemper (white or tinted) through Mechanical Applicator complete all as specified and directed.

M&L for preparing old plastered surfaces of wall by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying two coats of acrylic distemper (white or tinted) through Mechanical Applicator complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying two coats of acrylic distemper (white or tinted) through Mechanical Applicator complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed at any height incuding necessary scaffolding.

Material and labour for waterproof/weather proof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces. Note :- (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).

Material and labour for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed at any height incuding necessary scaffolding.

Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint after complete removal of existing surface/plastered surfaces.complete all as directed. Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height incuding necessary scaffolding.

Material and labour for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and directed.

NOTES FOR ITEM NO. 13 to 18 :- (a) The Contractor shall submit the MOU from any of the approved manufacturer as mentioned in tender document before commencement of work. The MOU shall be submitted on non-judicial stamp of Rs. 100 duly signed by the Contractor and Authorised Signatory of the manufactures alongwith the information of Authorised Signatory on the manufacturer’s official letter head. The work shall be carried out by the Authorised Applicator of the manufacture. The Authorised Applicator shall have valid Authorisation Letter from the manufacturer. The Authorisation Letter needs to be valid throughout the period of execution of the work. (b) Apart from the approval of make of material to be incorporated in the work from the Accepting Officer. The Contractor shall obtain the approval of manufacturer from the Accepting Officer prior to executing MOU with the manufacturer. (c) Cost of scaffolding etc shall be included in the quoted rate. (d) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card from the date of completion of work and same shall also be signed by the Contractor. (Except for BOQ item No. 17)

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (Ordinary Tint) through Mechanical Applicator complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (Ordinary Tint) through Mechanical Applicator complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc 30cm high complete all as specified and directed

VIJ ASSOCIATES (BID ID -3331203)

M/s Rahul Traders (BID ID -3327098)