Const. of Residence of the Executive Officer in Nagar Panchayat Gabhana.

Reinforced cement concrete work in walls (any thickness) including attached pilasters buttersses plinth and string courses fully columns pillars piers abutments post and struts etc including cost of centreing centreing finish and excluding the reinforcement 1:1.5:3 (1 cement : course send : 3 aggregate 20 mm nominal size) as per Sl.no. 5.2.2 DSR

Class 150 (non modular) brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all material labour and T&P etc. required for proper completion of the work as per Sl.no. 6.1.2 DSR

Reinforced cement concrete work in beams lintels suspended roofs having balconies shelves chajjas bands staircase and spiral staircase above plinth level up to Floor 5 level including cost of centring shuttering finishing and reinforcement with 1:1.5:3 (1 cement 1.5 coarse send and 3-grade stone aggregate 20 mm nominal size) as per Sl. no. 5.3 DSR

RCC work providing and laying in position specified grade of reinforced cement concrete. slab including the cost of centering shuttering finishing and excluding 11 reinforcement above plinth level up to 5th floor level in 1:1.5:3 (1 cement 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size) as per Sl.no. 5.1.2 DSR

Mild steel aur iron work in clean work such as reinforced concrete or reinforced brick work (when not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and excluding the supply of Steel and its wastage band hooks and anth thourized Overlapping shall we measured up to floor to level As per Analysis Enclosed

12 mm cement plaster with cement mortar in proportion of 1:6 cement and find sand (Dholpur sand) (not less than in 1.25 FM) of single coat of interior plastering up to floor two level including internal rounded angle chamfered and rounded angles not exceeding 80 mm in girth and finished even and smooth as per Sl.no. 13.1.2 DSR

20 mm cement plaster 1:3 (1 3 mm thick floating Coat of Neat cement as per Sl.no. 13.2.2 DSR

Mild steel or iron work in heavy sizes such as built up gates record rack roof work Gates etc brought to required form including drilling holes riveting or welding where necessary and also including supply of Steel bolts nuts wastage etc. and their fixing required for proper completion of the work as per Analysis Enclosed

Providing and laying vitrified tiles in floor with lean concrete of 600x600 mm size (thickness 10 mm) with water absorption less than 0.08% and confirming to is 15622 of approved brand and manufacturer in desired colour and shades laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS: 15477 including grouting of isint modified quick set tile adhesive (water based) confirming to IS: 15477 including grouting of joints including preparation of 75 mm thick base with concrete 1:4:8 Cement course sand and 10 mm B/B complete as per engineer in charge as per Sl.no 11.41.2 DSR

Painting two coat and applying priming Coat over new steel and other metal surface up to 10 cm in width or girth or small not exceeding 0.10 sqm area after and including preparing the surface by thoroughly clearing oil Greece dust and other foreign matter and scoured with wire brushed, fine Steel/wood scraper-send preparing and knotting including cost of all materials Labour T&P. etc required for proper completion of work as per Sl no. 13.48.3