SPECIAL REPAIRS TO OLD GYMNASIUM BLDG NO XVII OF MRC WELLINGTON AND ATTA SHED AND PM SHED AT 68 I SUPL PL ASC WELLINGTON GYM AREA UNDER GE WELLINGTON

Amount

Dismantling of asbestos cement corrugated, semicorrugated sheeting, any gauge and thickness in roof coverings including Nainital or similar pattern roof covering complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering and on chajjas etc fixed with self tapping screws all as specified and directed.

Plain cement concrete Type B0 1:2:4 using 12.50mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Dismantling of timber scantling 40 sqcm and over in sections in any position in unframed works all as specified and directed.

Second class hardwood as in scantling clean swan, purlins, rafters etc fixed to timber frame work complete all as specified and directed

Dismantling boarding/ ceiling board of any description fixed in any position with nails complete all as specified and directed.

GI frame work for frame size 605mm x 605mm seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flages of 20mm and 30mm and web of 27mm fixed surrounding walls using Nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flages of 15mm each and web of 45mm suspended from soft at approx 900mm c/c with GI cleat and section not exceeding 1.2mtr length of 0.55mm thickness having kurb web of 50mm of and flanges of 26mm each with lips of 10.5mm fixed to intermediate channel with connection clips across the intermediate channel at 457mm c/c complete all as specified and directed.

PVC insulation pannels 10mm thick with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of aluminium / G.I / M/S as per specification and drawing all as specified and as directed.

Dismantling of Wrought iron or Mild steel work of any description not otherwise provided for such as fencing posts, gates, etc complete all as specified and directed.

Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed.

Rendering 15mm thick cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed

Preparation of wooden surfaces and applying two coats creosete oil over wooden surfaces all as specified and directed.

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint (Anti Fungal) white or tinted over a coat of primer over including one coat of external wall care putty as approved by GE complete all as specified and directed.

Applying two coats of oil bound distemper over a coat of primer over a coat of wall care putty on newly plastered wall surface including preparation all as specified and directed. Note: Putty will be measured and paid separately.

Complete removal of existing treatment of wall surface and applying two coats of oil bound distember washable over a coat of primer, over one coat including sanding and preparation of surfaces to a true, even and smooth all specified and directed. Note: Putty will be measured and paid separately.

Wall care putty on wall average thickness 2-3mm in one coat of wall care putty in two layers complete all specified and directed.

Preparation of old treated or unplastered surface of walls by brooming down or steel wire brushing scraping down smoke spots, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed.

Preparation of old treated or unplastered surface of ceiling by brooming down or steel wire brushing scraping down smoke spots, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coats of white wash on ceiling complete all as specified and directed.

Complete removal of old treatment of walls and applying two coats of exterior Emulsion Paint (Anti fungal) white or tinted over a coat of primer over and including a coat of external wall care putty on average thickness of 2-3mm, smooth finish complete all as specified and directed. Note: Rate shall be quoted with required scafolding for a height upto 10 meter buildings.

Resecuring or easying and adjusting without taking down shutter of any description not exceeding 1 sqm each all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm each all as specified and directed.

Fancy type decorative drapray rod 20 mm dia Aluminium with powder coated including fancy type side caps and brackets, as in repairs complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads supply and fix new sheet glass 3mm thick ordinary quality and glazing with oil putty and beads in square not exceeding 0.5 sqm in each pane all as specified and as directed

Aluminium alloy handles, fabricated type anodised, extruded section 100 mm long including fixed in repairs all as specified and directed.

Aluminium alloy handles, fabricated type anodised, extruded section 150 mm long including fixed in repairs all as specified and directed.

Preparation of old wooden floor surfaces of any description width or grith including cleaning and preparing the surfaces including one coat of wood filler and two coats of mellamine polish, complete all as specified and directed.

Boarded floors of Ist class hardwood 30mm thick planned one side and edges tounged and grooved or rebated complete all as specified and directed.

French polish to new wooden surfaces of any description any width or grith including cleaning and preparing the surfaces inluding a coat of wood filler on new surfaces works with two or more coats etc all as specified and directed.

Preparation of old painted wooden surfaces and wood based materials of any description not other wise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Preparation of old painted steel surfaces and steel based materials of any description not other wise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Taking down PVC/ wooden chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down PVC / Wooden chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

2nd class hard wood wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

30mm thick glazed and skeleton, shutter, divided into squares to receive glass, gauze (with sash bar) with plain chamfered or rounded, mitred and rebated sah bars, any numbers the size of member of shutter as specified in SSR Pt-I section 8 clause 8.24 (a) window and ventilaters shutters using second class hard wood and fitted to chowkat all as specified and as directed.

35mm thick second class hard wood plain, framed, panelled door shutters (any No of panels) with veneered particle board medium density, 12mm thick complete all as specified and directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:4 on fair face of brick or concrete surface

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

All as per item No 41 hereinbefore but reinforced cement concrete all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate all as specified and directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) light grade polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement slurry to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) light grade polished, area of each tiles not exceeding 0.36 Sqm, as in skirting/, dadoo etc. set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over and including 10mm cement plaster as backing coat in cement mortar 1:4 complete all as specified and directed.

Granite 20mm thick machine cut, as in floor bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in cement mortar 1:4 all as specified and directed.

Rounding to edges of stone slabs/ Granite slab one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed

Brick work with sub class ‘B’ bricks, burnt clay old size brick, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) all as specified and directed.

Brick work with sub class 'B' bricks, burnt clay old size brick, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified and directed.

Dismantling of PVC water tank 1000 Ltrs capacity from existing position all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 1000 Ltrs hoisted and fixed in position with proper inlet and outlet connections all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia and connections site all as specified and directed

Taking up or down steel tubing and connections for 20mm dia and connections all as specified and directed

Supply, laying and testing steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete all as specified of size 15 mm bore.

Supply, laying and testing steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete all as specified of size 20 mm bore.

Vitreous china squatting pan Orrissa pattern size 580mmx 440mm white with integral foot rest with 'p' or 's'trap including flush pipe PVC 32 mm dia, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc, and making good to floors, fixed in repairs, complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe , seat and PVC seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe, antisyhonage pipe etc and including fixed in repairs complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket fixed in repairs complete all as specified and directed.

Table top basin of size 550x400x160mm including waste coupling and stainless steel bottle trap complete all as specified and directed. Make: Cat No S-2020102 (campa) of CERA or techno commercially equivalent

Vitreous China Urinal, Half stall type,white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including flush pipe, grating and union for discharge pipe, complete all as specified and directed

Cast copper alloys Chromium plated fancy type Urinal spreader with Auto closing system Push cock ( Urinal Valve) with chromium plated hose pipe fixed suitable for 15mm dia pipe for urinals all as specified and directed.

Bib tap fancy type long body chromium plated 15mm dia complete including fixed in repairs all as specified and directed

Chroumium plated fancy type long body 2 in 1 bib tap fixed with existing pipe and fixed in repairs all as specified and as directed. Make: KUP-35041 PM of JAQUAR or Equivalent

Angular stop cock with wall flange for 15mm dia of chromium plated fancy type in repairs complete all as specified and directed. Make: Cat No KUP-35053PM of Jaguar or techno commercially equivalent

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Over head shower rose 200 mm X 200 mm square shape single flow with shower arm square 450 mm long and fixed in repairs complete all as specified and as directed. Make: Cat No OHS-35497 of Jaquar or techno commercially equivalent

Health faucet with 8mm dia, 1m long flexible tube and wall hook with back flow preventer complete fixed in repairs all as specified and directed.

Soap dish complete fixed in repairs all as specified and directed. Make: Cat No ACN-1131N of JAQUAR or Equivalent

Towel ring square/ rectangular with round flange and fixed in repairs complete all as specified and directed. Make: Cat No.ACN-1121N or ACN-1121BN of JAQUAR or equivalent

Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges and fixed in repairs all as specified and directed.

CP toilet paper roll holder complete fixed in repairs all as specified and as directed. Make: Cat No.ACN 1155N of JAQUAR or equivalent

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

75mm thick plain Cement concrete, 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection and hard standing finish even and fair complete all as specified and directed.

Supply and Fix UPVC ventilator frame shall be made of PVC material confirming to IS-10151 the ventilator frame of extruded UPVC section having overall dimensions of 100x62x50mm having wall thickness 2mm+- 0.2mm. Corners of wall frame shall be joined by MS galvanised brackets joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm +/- 0.1mm and the tie rod shall be provide at the bottom of the frame all as specified and directed. Glazing (1) : The ventilator system should be including glazed with 5.5mm thick glass of size as required in ventilatior frame (louvered type) as per manufacturer instructions including all fittings and necessary locking arrangements complete all as specified and directed.

Demolition and breaking up drain pipes of any description of any size complete all as specified and as directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) 110mm dia bore pipe single socketed in any length, with rubber ring joint fixed to walls with PVC clamps complete all as specified and directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

PVC (SWR) bends 110mm bore any radius, complete all as specified and directed.

PVC (SWR) bend of any radius 75 mm dia complete all as specified and as directed.

Stack clamps out of 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified.

Stack clamps out of 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 110mm bore of pipe, complete all as specified.

PVC (SWR) vent cowl of 75 mm bore of pipe complete all as specified and directed.

PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed.

Reinforced cement concrete (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Dismantling of single layer Mangalore pattern tiles or similar pattern tiles on roof all as specified and directed.

Dismantling battens for tiles, shingles etc, of any size including tilting fillets spaced exceeding 15cm all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Galvanised, corrugated mild steel sheeting 0.63mm with two corrugation side lap fixed with coach screw and washers, in roofs walls etc. with grade of zinc coating 275 all as specified and directed.

All as item No. 95 hereinbefore but except sheets all as specified and directed. Note: The Sheet dismantled shall be reused as directed.

Second class HW, clean sawn, battens, exceeding 5 and not exceeding 15 Sqcm in cross section, spaced at 30 cm centres all as specified and directed.

Fixing only Second class HW clean sawn battens at 30cm centres exceeding 5 and not exceeding 15 Sqcm (Except batten) all as specified and directed. Note: The battern dismantled shall be reused as directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed

Stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 and pointing the dressed surface with same mortar as the work proceeds all as specified and directed.

Extra over stone walling for Granite or Trap stone for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm all as specified and directed.

Keyed pointing to random or polygonal rubble masonry uncoursed or brought upto courses in cement mortar (1:4) all as specified and as directed.

Rendering 15mm thick on fair faces of stone masonry surfaces in cement mortar 1:4 finished even and smooth without using extra cement for the stone wall all as specified and as directed.

Preparing surfaces, plastered or unplastered on new wall surface and applying two coats of white wash on new wall surface complete all as specified and directed.

Preparing surfaces, plastered or unplastered on old wall surface and applying two coats of white wash on old wall surface complete all as specified and directed.

40mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed.

Machine cut kota stone slab in flooring/ cills 20-25mm thick over and including 15mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish, complete all as specified and directed.

Machine cut kota stone slab 20-25mm thick over cement screed base as in riser, skirting, dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm all as specified and directed.

35 mm thick flush shutter,solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer with lipping/ frame on one faces, complete all as specified and as directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Mild steel hold fast conforming to Fe-290 Gde-165 all as specified and directed.

PCC type C1, 1:3:6 using 20mm graded stone aggregate over platform, bed blocks for hold fast, and like of any description, over 10mm in width or grith not otherwise described all as specified and directed.

Butt hinges, 100 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long for door / window all as specified and directed.

Extruded aluminium alloy handles 150 mm size, fabricated type, anodised complete all as specified and as directed

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane all as specified and directed.

0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) fixed to wooden doors all as specified and as directed.

2nd class hard wood decorative weather boarding, wroght, thickness 20mm to 25mm and rebated on thisck edge to give 20mm laps and fixed all as specified and as directed.

Racking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses work in old stone wall in cement mortar 1:4 complete all as specified and directed.

Preparation of old treated / untreated stone / brick wall surfaces and applying two coats of Exterior Emulsion Paint (Anti Fungal) white or tinted complete all as specified and as directed.

Moorun / Red Bajri/ Earth filling in floors or pavings laid in layers not exceeding 15cm thick spreed, levelled and rammed including watering all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.

75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base floor and finished even and fair complete all as specified and directed.

Durastone Heavy Duty Tiles of thiskness 10mm (rectangular/ square) of area 0.09 Sqm to 0.18 Sqm as in floors set and jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles including screed 15mm thick in cement mortar 1:4 complete all as specified and directed.

Durastone Heavy Duty Tiles of thiskness 10mm (rectangular/ square) of area 0.09 Sqm to 0.18 Sqm as in skirting / dadoo set and jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles including 10mm thick backing plaster in cement mortar 1:4 complete all as specified and directed.

Single lever basin mixer wall mounted consisting of operating lever, wall flange Nipple and spout including concealed body and 450/600mm long braided houses complete all as specified and directed. Make: Cat No KUP 35233KPM and ALD - 233/ALD 235 of Jaquar techno commercially equivalent

CP single lever exposed parts Kit of Hi Flow Diverter Consisting of operating Lever, Wall Flange (with seal) & Button spout complete fixed in repairs all as specified and as directed. Make: Cat No KUP-35079KPM of Jaquar or equivalent

Concealed body for single lever high flow diverter with button assembly, cartridge sleeve (without exposed part) complete fixed in repairs all as specified and as directed. Make: Cat No ALD-079 of Jaquar or equivalent

Spout with button attachment for Hand shower with wall flange complete fixed in repairs all as specified and as directed. Make: Cat No SPJ-35463PM of Jaquar or equivalent

Retangular tube channels of appropriate size / type as per actual ground requirement, cross arms, brancing, support, clamps and brac plates etc. ISI Marked, factory fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of prepation of surfaces and mechanical powder coating at factor, perfectly suitable for the fixing arrangement of 150W LED batten light at a height of approx 5/6 Mtrs from FFL complete all as specified and directed Make: Tata / Jindal / Apollo

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish to match with the existing surface of walls, floors, etc. all as specified and directed.

Point wiring complete with 4 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade in concealed complete with conduit fittings/ accessories including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for 3pin 15A socket outlet on independent board all as specified and directed. Note: 1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate. 2. Cutting chases in stone masonry wall will be measured and paid separately.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate in concealed including any alteration required shall be made (cutting brick/ stone wall) and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 4 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate in concealed including any alteration required shall be made (cutting brick/ stone wall) and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

All as per item No. 143 hereinbefore but SPN 230V 32 Amps capacity all as specified and directed.

All as per item No. 143 hereinbefore but MCB TPN 415V 40 to 100 Amps capacity all as specified and directed.

Taking down old unsv FTL fittings, Supply and fix 24W LED batten light Lum output 2000 CCT 6500K size 115x2.5x3.5 cm comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. Panasonic Product code:-PBTM06247 / Philips / Bajaj.

150W LED Batten light for Badminton court LED life cycles 50000 Hrs - LED Effecincy : 152 Im/W - LED Luminary Watts: 150W - Input Voltage : 180V to 265 VAC-Colour Rating : 5500K to 6500K - Cool White - Colour Rendering Index > 70 - Frequency (Hz): 50- 60 Hz- Drier Integrated (Yes/No) : Yes- Ingress Protection : IP-54- PF > 0.9 - Beam Angle: 120 Deg and relaiable intergrated energy efficient driver to meet the different requirement across high ceiling application connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make OSRAM or Techno Commercially equivalent ISI Marked.

LED bulk head light fitting 12 W 6500K lumen output 1080 including LED light driver connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make: Panasonic Cat Part No PBHM02127 / Philips / Bajaj.

LED luminaire 600mm x 600 mm, 30 watt, 6000K, 100Watts/Luman, 220 V AC surface mounted with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed. Make: Panasonic / Philips / Bajaj.

Taking down unserviceable building security light and Material and labour for LED Security Light fitting of 15 Watt, 5700K comprising of eposy powder coated housing enclosed with glass cover in frame with protection IP 65 complete with all accessories and lamp colour white all as specified and directed. Make: Panasonic Cat Part No PSTM27158 / Philips / Bajaj.

GI Pipe light Grade 40 mm bore bracket of suitable size bent to shape of not less than 1.2m long with clamp made of GI flat Iron of size 32 x 6mm for street light fittings, duly painted with one coat of red oxide primer and two coats of aluminium based paint, fixed on poles with bolts, nuts and washers complete all as specified and directed.

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 Runs of cable and one run of conduit shall be measured as one RM

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 Runs of cable and one run of conduit shall be measured as one RM

All as per Item No 153 hereinbefore but 2.5 Sqmm and including casing caping all as specified and directed

Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm including making openeing brick/ stone Masaonary Wall as per reqiurement of Exhuast Fan and make good and matching with existing surfaces complete all as specified and directed.

Cutting chases in stone masonry wall/concrete floor/roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 10cm girth all as specified and directed

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade in concealed complete with conduit fittings/ accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note : 1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate. 2. Cutting chases in stone masonry wall will be measured and paid separately.

All as per Item No 157 hereinbefore but point wiring complete with 4 sqmm for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Modular Metal Flush Box 12 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 3 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 4 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular Metal Flush Box 6 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate With Frame White cover plate with frame, 12 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate With Frame White cover plate with frame, 3 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate With Frame White cover plate with frame, 4 module all as specified and directed. Make: Havells/ Legrand/ L&T.

Modular White Cover Plate With Frame White cover plate with frame, 6 module all as specified and directed. Make: Havells/ Legrand/ L&T.

60 Watts, 5700K 220 V AC, Aesthetically designed robust LED high bay equipped with specially designed heat sink and reliable integrated energy efficient driver to meet the different requirement including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed. Make: Panasonic Product code: PBYM11608 / Havells / Philips

P K ENTERPRISES

VVM CONSTRUCTIONS

UNIQUE INDIA CONSTRUCTIONS