Repair, Electrification, Supply of Furnitures and Renovation of Community hall building to Zonal office building at Thandurai Community Hall in ward no.19

Amount

Supply, delivery and fixing of 4 feet 20W LED with fitting from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube

Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc, complete SD 106

Supply & Installation of Air-Conditioner with Copper Coil 1.5 TR Split Type AC Unit - 5 Star Rated and cost and conveyance of material to site, loading and unloading charges, labour charges and all other incidental charges, etc, complete

Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay rela and cost and conveyance of material to site, loading and unloading charges, labour charges and all other incidental charges, etc, complete

Supply and fixing of Copper Refrigerant Piping of 7/8" dia and cost and conveyance of material to site, loading and unloading charges, labour charges and all other incidental charges, etc, complete

Supply and fixing of water drain pipe line (1” PVC Pipe and cost and conveyance of material to site, loading and unloading charges, labour charges and all other incidental charges, etc, complete

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) cost and conveyance of material to site, loading and unloading charges, labour charges and all other incidental charges, etc, complete

Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Plastering with cement mortar 1:5 (One part of Cement and five part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

G.Sunil Kumar (BID ID -1097574)