Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹3.3 Craccepted-aoc | ₹3.3 Cr | accepted-aoc |
Tender Value
₹3.1 Cr
EMD Value
₹4.7 L
Closing Date
13 Feb 2026, 10:59 pmClosed
Minor Irrigation Department
executive engineer
CONSTRUCTION OF CHECKDAM CUM PICKUP CANAL
MI/2025-26/DA/WORK_INDENT10818
MI/2025-26/DA/WORK_INDENT10818
Open
Dam and Allied works
Two Tender Document System(Two Cover)
Minor Irrigation Division Mandya
9 documents required · 9 mandatory
each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 Satisfactory completion (at least 90% of the contract value), as Prime contractor, at least one similar work such as Construction of check dam/ Bridge Cum Check dam/ Pickup of value not LESS THAN RS 155.08 LAKHS . during the last five years. (Usually not less than 50% estimated value of contract). Financial turnover and cost of completed works of previous years shall be given weightage of 10% per year based on the rupee value to bring them to 2025-26 price level
Each Tenderer in its name should have in the last five years i.e.2020-21, 2021-22, 2022-23, 2023-24 and 2024-25 ,Executed in any one year (for a continuous period of 12 months) the minimum quantities of work (usually 80% of annual requirement) for works costing up to Rs.100.00 lakhs,01.Earth work Excavation,Desilting, Embankment & Filling(Combined qty-15560.00cum. 02 Cement Concrete (both PCC and RCC)-2340.00cum 03.Fabrication of reinforcement steel -46.20 tonne
Valid registration certificate
List of existing commitments and ongoing works
List of works for which tenders already submitted
valid GST Registration Details
Availability by owning at least 50% of the required / specified key and critical equipment for this work and the remaining 50% can be deployed on lease/hire basis for all works provided the relevant documents (commitment agreements etc., RC Book, Sale Deed, purchase invoice, hire/lease documents with relevant hire / lease vehicles documents attached) for availability for this work are furnished below:-.Hydraulic Excavator -TOTAL REQURIED 4 NOS-2 OWN 2 HIRE,Tipper-TOTAL REQURIED 4 NOS-2 OWN 2 HIRE,Self-Loading /Transit Concrete mixer -TOTAL REQURIED 3 NOS-2 OWN 1 HIRE, Earth Compactor TOTAL REQURIED NOS-1 OWN OR HIRE-1
each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25,Achieved in at least two financial years a minimum financial turnover (In all classes of Civil Engineering Construction works) of Rs 620.35 Lakhs. Annual turnover certificate along with balance sheet certified/attested by chartered accountant should be uploaded with18 digit System generated UDIN number. Financial turnover and cost of completed works of previous years shall be given weightage of 10% per year based on the rupee value to bring them to 2025-26 price level
Liquid assets and /or availability of credit facilities of not less than Rs 101.00 Lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.) in the Prescribed Format
Contractor should produce the updated G.S.T Clearance Certificates, IT Returns, Profit and Loss Statements along with balance sheets issued by Chartered Accountant for the years from 2020 TO 2024-25
Total value of civl engineering works executed and payments received in the last five years (year-wise)
Banker Details for reference
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
Item Rates are Exclusive of GST and amount to tender is also Exclusive of GST hence the contractor should quote his/ her rate Exclusive of GST.
The Bidder shall quote Rates WITHOUT adding GST for either materials or works Contract (Service)GST payable by the contractor under this work/contract will be paid to the contractor.
Latest Address and contact number for communication to be furnished
₹5,000
₹4.7 L
13 Feb 2026
6 Feb 2026
16 Feb 2026
11 Feb 2026
10 Feb 2026
CONSTRUCTION OF CHECKDAM CUM PICKUP CANAL ACROSS THENNEKATTE HALLA NEAR ARAKERE VILLAGE IN SRIRANGAPATNA VILLAGE MANDYA DISTRICT
Clearing and Grubbing Road Land.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ear...
Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations comple...
De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle ( excluding cost of transportation ) includin...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of a...
Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates a...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The g...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The g...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, h...
Providing rubble stone/boulder filling between or behind abutment below apron including cost of all materials, labour, hand packing, finishing top surface & all necessary works as directed an...
Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, ma...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification.complete with all lead and lift including Machineries loading and unloa...
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant).complete with all lead and lift including Ma...
Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification.complete with all lead and lift including Machineries loading and unloading charges and as per the Direction Of...
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than ...
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate consisting of skin plate, vertical and horizontal girders, wheels, stiffeners, lifting brackets,...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wall plates, seal seats, first stage anchors, anchor girders, anchor bars, trunnion supports with all...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tennekatte TS 05-Feb-2026 07-40-55.pdf
Instructions to Tenderers • 0.56 MB
Insu surety Bond-Performance secu-pdf.pdf
Instructions to Tenderers • 0.43 MB
ecv.jpeg
Instructions to Tenderers • 0.21 MB
mineral dispatch permit.zip
Instructions to Tenderers • 6.45 MB
KMMCR rule.pdf
Instructions to Tenderers • 0.28 MB
star_rates.pdf
Instructions to Tenderers • 2.13 MB
Royalty Circular.pdf
Instructions to Tenderers • 4.41 MB
labour.docx
Instructions to Tenderers • 0.98 MB
FD417EXP-12-2024-Dtd-09-08-2024.pdf
Instructions to Tenderers • 0.12 MB
KW-4 Tennekatte.doc
Tender Document • 7.72 MB
Tennekatte Pert Chart.xlsx
Instructions to Tenderers • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .