Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹41.5 LAccepted-AOC | 1 | Accepted-AOC L1 Bidder | |
| 2 | 2₹45.4 L+₹3.0 L (7.12%)Rejected-Finance KANTHADHAR P O ICHAPORE NAWABGANJ DIST NORTH 24 PARGANAS PIN 743144 WB | ICHAPORE NAWABGANJ | NORTH 24 PARGANAS | WEST BENGAL | 743144 | 2 | Rejected-Finance Not L1 Bidder | |
| 3 | 3₹45.5 L+₹3.1 L (7.43%)Rejected-Finance | 3 | Rejected-Finance Not L1 Bidder | |
| 4 | 4₹45.6 L+₹3.2 L (7.60%)Rejected-Finance | 4 | Rejected-Finance Not L1 Bidder | |
| 5 | 5₹46.3 L+₹3.9 L (9.23%)Rejected-Finance | 5 | Rejected-Finance Not L1 Bidder |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
1 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
REPAIR MAINTENANCE OF SQAE BUILDINGS AND SMART PERIODICAL MAINT TO DGQA AT COSSIPORE UNDER GE NORTH KOLKATA
2023_MES_573078_1
8212/22-23/E8/GE(N)/KOL/ OF 2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
COSSIPORE
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹84,000
Yes
9 Feb 2023
4 Jan 2023
2 Feb 2023
5 Jan 2023
1 Feb 2023
18 Jan 2023
Amount
Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof, ceiling, louvers, parapet, column, beam and lintel by hammering with wooden mallets carefully chipping off the old concrete surface and necessary scaffolding if required including cutting of rusted reinforcement if so required, cleaning the surface thoroughly by using wire brush, emery paper etc including cleaning all around the reinforcement by any means as required and applying alkaline rust removing chemical including preparation of surface completely for applying bonding agent and disposal of debris to outside the premises complete all as specified and as directed.
Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed
Material and labour for TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.
Material and labour for TMT bar 5 mm dia and over upto and including 10mm dia as in stirrups spacers and binders cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed.
M&L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed by Engr-in-charge. (Make : SIRA/FOSROC or any other equivalent as approved by GE)
Supply and application of Epoxy Zinc rich primer on the steel surface by brush, the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 complete all as specified and directed by Engr-in-charge. (Make : SIKA/FOSROC or any other equivalent as approved by GE)
M & L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, column etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minimum tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28 days and complete all as specified and directed by Engr-in-charge.
Supply, mixing and application two component structural grade polymer modified reinstatement mortar upto 25 mm average thickness, where local spalling has taken place or shuttering is not possible . The mortar can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as specified and directed by the Engr-in-charge.
M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.
M&L for use and waste of formwork to sides of sides and soffits of beams, lintels, floors etc. for rough finished concrete surfaces complete all as specified and as directed.
M&L for use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed.
M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works n.exc. 200mm thick etc for rough finished concrete surfaces complete all as specified and as directed
M&L for use and waste of formwork to fins, facia, louvers. parapet, chajja etc for rough finished concrete surfaces complete all as specified and as directed
Material and labour for 10 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed
Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. (Note :- WPC shall be measured and paid separately.)
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing liquid admixture for cement mortar complete all as specified and as directed.
Material and labour for rendering 05mm thick in cement mortar (1:3) on concrete surfaces in ceiling and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Demolition of reinforced cement concrete of roofs, floors , staircases, landing, chajjas and similar suspended works in ground floors beams(reinforcement cut as required to facilitate demolition) complete all as specified and directed.
Demolition of reinforced cement concrete of roofs, floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended works (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
Material and labour for RCC 1:1:5:3 type A1 (using 20mm graded stone aggregate) as in fins, fascias, louvres, parapets,and railings exc. 60cm in height, newels, balustrade, and the likecomplete all as specified and as directed.
Material and labour for RCC 1:1:5:3 type A1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
All as per item No. 24 above but in ceiling complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified & directed.
M&L for applying wall care putty 1.5mm thick and applying two coats of oil bound distemper over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed.
Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified & directed.
Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applying two coats of oil bound distemper over a coat alkali resistant primer over 1.5 mm thick wall care putty complete all as specified and as directed.
Material and labour for preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed.
All as per item No. 30 above but in ceiling complete all as specified and as directed.
Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc complete all as specified and as directed.
Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as per manufacturers instructions complete all as specified and as directed.
Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed.
Supply and fix in repair PVC (SWR) pipe 110 mm bore,single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.
Supply and fix in repair PVC(SWR) bend/shoe 110 mm dia complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces of wall by vaccume based sanding machine, applying wall care putty(Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by Auto Roller complete all as specified and as directed.
Material and labour for complete removal of existing treatment from old plastered surfaces of wall by Vaccume based sanding machine, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick or as required ( Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemepr white or coloured by Auto Roller complete all as specified and as directed.
Material and labour for preparation of newly plastred surfaces of wall by vaccume based sanding machine, and applying two coats of Anti Fungal paint white or coloured by Auto Roller, including necessaryscaffoldings complete all as specified and as directed.
Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vaccume based sanding machine, removal of nails etc & filling cracks/hole with putty, and applying two coats of Anti Fungal paint white or coloured by Auto Roller, including necessary scffoldings complte all as specified and as directed.
Friends Trading Co
M/S SHEKHAR TRADING CORPORATION
MOTHER LUMIER INDUSTRIES
DK DAS AND CO
SHIVAM ENTERPRISE
ALOKE ENGINEERING AND COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .