REPAIR TO ROAD PATH AND ROAD SIDE FURNITURE ITEMS AT 7 BIHAR REGT AT MIL STN BHUJ

Amount

Demolition of cement concrete in ground floors and paving n.exc 15cm thick (below or above ground level )

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate 75 mm thick as in sub base

M&L machine pressed Precast concrete rubber moulded interlocking pavers block with grey cement and pigment any shape and size confirming ti IS 15658-2006 of 80 mm thickness M-40 grade complete as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation

M & L for factory made precast Machine pressed kerb stones of PCC grade M -15 design mix and of shape and size rected, set joined and pointed cement and sand mortar 1:4 fixed in repairs in repair with and including necessary excavation and earthwork and making good the disturbed surface to match with existing surfaces including removal of dispodal of rubbish complete all as specified and directed . Sizes shall be as under :- Lenght (L) Not less than 300 mm , Height (H) 300 mm to 350 mm , thikness (T) 100 mm to 150 mm and radius (R) 75 mm completed all as specifed and as directed by Engineer-in -Charge.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like n.exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F in repairs Raised pavement marker (Cat Eye Road Stud) complying ASTM D-4380 type H specifications, made of high strength engineering plastic body having at least 13635 kgs load bearing capacity in accordance with ASTM D 4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RW/NH. 33023/10/97-DO.III & size or marker 9 cms x 10 cms x 1.6 cm having shape so that no water penetration or dust accumulation takes place on reflective surface, fitted with electronically welded tough polycarbonate micro prismatic reflective panels having not less than 13 sqcms surface of each side having long distance visibility at night and in wet weather condition. The slope or retro-reflectory surface shall be 35 + 5 degree to base. Each reflector shall have a cill not less than value specified in table 1 of MORTH circular dated 11.06.97 respectively. The body of the marker having finger grip for easy and accurate placement and application with adhesive on Asphalt or Cement road all as specified and directed.

Taking down old sign board of any description at any places under AGE B/R-I S & F 3 mm thick crystal Acrylic board, pre-Painted by Sun U.V Print of any colour inclding xperia print , including alphabeticl wording any size & shape with MES logo of any size sanctioned & approved by GE/Engieer-in-Charge complete all as specifed and directed by Engineer-in-Charge.

S & F in repairs solar cat eye Aluminium alloy shell ( 100 % water proofing design according to 65 of Size 125 mm x 125mm x25 mm ( shank 60mm ) of high efficiency Mono rystaafine solar panel 2.4 v/0.3 watt one Ni-ed rechargable battery 91.2 v/1600MA) consisting of six super bright LED with 10,000 to 18,000 mcd complete as per manufatures instructio including taking out old cat eyes and removal from site etc all as specified and as directed.

machine vision plus