proposed construction of waiting hall and prasadam stall for arulmighu arunachaleswarar temple in thiruvannamalai.

Amount

Earth work excavation and desposting on banks with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stony earth and earth mixed with small size boulders et., As per SS 20B excluding hard rock requiring blasting inclusive of shoring shuttering, baling ojut water where ever necessary and including refilling consolidation etc., complete in all respects complying with relevent standard specifications and as directed by departmental officers.

Providing Pre-constructional anti- termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentrations raft slab and beam, under Cellular raft slab, around the footings, column pits, trenches, pits, wall trenches, back fill, plinth filling, junction of wall and floor, side walls of foundation, external perimeter of building,surrounding of pipes expansion joints, etc. as per IS specification and as per the instructions of chemical manufacturer and all as directed.The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 (PART-2) or equivalent BS specification.

Supplying and Filling with M - sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Plain Cement Concrete 1 : 5 :10 ( one part of cement, five parts of sand and ten parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.

Refilling the Excavated good quality Earth in Plinth area ,in basement in layers of not exceeding 200 mm thick etc complete.

Supplying and Filling Gravel in foundation and basement of layers not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

For Column footing, plinth / Grade Beam, bed blocks, template surfaces, steps, piers, raft slab / beams and such other members

For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For Plane Surfaces such as rectangular or square RCC Columns, sunshades, top and bottom slab of rcc boxing, etc.

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 325 kglcum and maximum water cement ratio of 0.55, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation & Basement

Ground Floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brickwork in Cement Mortar 1:5 (One cement and five sand) using III Class Country Bricks of size 8.75" x 4.25" x 23/4" in Foundation, Basement including curing etc. complete complying with standard specification.

Foundation & Basement

Brickwork in Cement Mortar 1:6 (One Cement and Six sand) using III Class Country Bricks of size 8.75" x 4.25" x 23/4" in Super Structure including curing etc. complete complying with standard specification.

Ground Floor

Special Ceiling Plastering and Finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 for Internal walls & External walls (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Designing ,Providing and Fixing in Hot Rolled Structural Steel Members / Sections consists of MS Joists, Channel , Angles,Purlin,hollow Tubes,runners ,Insert Plates,Flats etc at all levels.Surface preparation of all Members by Sand blasting to 5A 21/2 Grade and Painted with Anti Corrossive, Low VOC PU Paint ( Metalic Finish )with Compatable Primer to a minimum film thicknesss of 75 micron and Two Coats of LOW VOC PU Paint of Alzonable make and Total dry filmthickness 225 microns.(Only Man Structural Supports related to Facade works if required any shall be considred and no base Frame or Support Structure shall not be considered, Which shall form part of the respective Glading and Glazing Items ) refer Particular Specification for mode of Measurements for this items.

Providing and Fixing of PolyUrthene Foam for Slopped Roof as Thermal Insulation Panels or Sandwich insulated Panels with external 0.50mm .Total Coated thickness Pre Painted Galvalume Sheet with Trepezoidal Roofing Profile having crest height of 38mm at every 333mm Span,whereas internal 0.50mm .Toal Coated thickness per Painted Galvanized iron Sheet with micro ribbed profile and the insulation materialwill be Chlorofluoro carbon and hydro chlorofluoro Carbon free, high performance rigid Polyurethane Foam ( PUF ) CONFIRMING TO is 12436 having density not less than 40+ or - 2kg /cum .Thermal conductiviy ( K-Valuve ) 0.024 W/m .K measured at 10 degree C mean temperature along with necessesary flashings such as L flashing.C flashing etc and accessories such as screws, fastners,Sealants etc, for fixing the panel etc., complete complying with standard specifications.

Supplying and Fixing of GI Sheet Gutters for Collecting Rain Water from Slopped Position of GI Sheet 0.8mm thick,0.70cm wide with appropriate hanger including fixing in position and necessesary cost of brackets, screws,nails etc.,complete.

Flooring with ut Stone Slab of size 600 x 600 mm and other sizes suitable for size requirements not less than 100 mm thick with machine Cut edges and Top Surface dressesd as directed by the departmental officers including cost and conveyance of materials to site and labour charges for Paving and Pointing with Cement Mortar 1:3 etc., complete ( Single ine Dressing )

Supplying and fixing Mild Steel Grills for Windows, Ventilators, etc., including priming one coat necessary fixtures complete as per drawings and specifications and as directed by the Engineer.

Manufacturing ,Supplying and fixing of Stainless Steel Hand Rails for Staircase using 50mm dia 304L Grade Stainless Steel Pipe of 1.60mm thick at required location to height of 900mm from finished Floor level welded to 38mm dia Stainless Steel Pipe Post of 1mm thick as Vertical at 900mm Centre with 2 Nos of 25mm dia intermediate horizontal Stainless Steel Pipe of1.6mm thick in between.The Vertical Pipe has to be welded to the 100 x 100 x 6mm .MS Base Plate encased inthe base concrete.The Rate is inclusive of the charges for Cutting, bending,welding,grinding,Polishing,conveyance ,electrical charges., etc complete.P57.SlNo.248

Providing ,assembling and Supplying of Laminated Glass Panels for SKY Light using Heat Strengthened Clear Glass and Toughened Glass Sandwiched using . 1.52 PVB Layer .The Glass of approved Colour ,size and shape as required shade all omplete for the required performance as directed by the Engineer-in-Charge.The heat strengthened clear Glass having properties as 'U' Valuve of 4.20 to 5.50 W/m2 or lower degree K etc..Solar Heat gain coefficient less than or equval to 0.35. The Sandwich Panels shall be assembled in the Factory workshop of the Glass Processor.The certificate obtained from approved agency should be produced for Heat soak Test for clear glass .For Payment ,only the actual area of Glass on face # 1 ofthe Glass Panels ( Excluding the areas of the Grooves and weather Silicone Sealant ) provided and fixed in position ,shall be measured in Sqm

Painting Two Coats over new Iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing Zinc chromite priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting the Walls with Two Coats of Oil Bound Distember over One Coat of Water BasedCement Primer including cost for Distember ,Primer,Cleaning and scrapping the walls , rendering the walls smooth with necessesary putty,brushes, scaffolding arrangements , labour charges etc., as per standad specification.( The Colour and shade of the Distember shall be got approved by the Executive Engineer before use on work )

Painting Two Coats of Newly Plastered Wall Surface with Ready mixed Plastic Emulsion Paint of First Class quality and of approved Colour over a priming Coat including thorough scrapping , Clean removal of dirt ,and including necessesary Plaster of Paris Putty, wherever requiredetc., complete complying with standard specification.

Painting Two Coats of Newly Plastered wall surface with weather proof ready mixed Exterior Emulsion Paint of First quality and of approved colour over a Priming coat including through scrapping,clean removal of dirt ,and including necessary plaster of paris ,putty wherever required etc.,complete complying with standard specification.

EXTERNAL PLUMBING WORKS

Providing,supplying &laying of Unplasticized polyvinyl Chloride (UPVC-sdr-11) pipes conformingto is 15778 having thermal stability cold water with brass and UPVC fittings like Elboe,Brass Tee,Brass Elbow ,Offsets,Tee with clams @1.00 metersspacing with joints with one step UPVC solvent cement with including cutting of chasde including testingof the joints complete and making good the walls etc., Rate is inclusive o f all material labour ,transportion,tools &tackles all compete as per specifications,concealed work including chase cutting) complete complying with standared specifications and as directed by the Departmental Officers.

20 mm dia

25 mm dia

32 mm dia

Supply and fixing of SS Heavy Duty Long Body tap 15 mm (parryware or equivalent) etc .,complete

Providing, supplying & laying of Gun Metal type NRV - pressure rating less tahn 16 Kg/Sqcm and IS778 with 2 Nos of MTA with jointing material like shellac, thread including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, levies VAT etc all complete as per as per specifications, complete complying with standard specification and as directed by the Departmental Officer

32mm dia

ELECTRICAL WORK

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and drop only concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End (Data A1)

Supply and fixing of 4' 20W LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end) (Data A2)

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fanstep regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") (SD 458)

Supply and fixing of 40W LED low bay fitting with conduit pipe suspension from the angle iron supports with suitable clamp supports with side plate and cross arms with PVC unsheathed copper leads from terminals to the fitting (Higher end) (Data A3)

Supply and fixing of 2nos.6A two module 3 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD 383)

Supply and fixing of 1no.6A two module socket , 1 no. 6/16A two module socket, 1 no. 6A one moduleswitch, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End (SD 397)

Supply and Installation of TV Socket on sutiable module box with front plate

Supply and Run of 2 core 1.5 sq.mm shielded copper speaker wire in sutiable PVC rigid pipe on wall or on ceiling with connection.

supply and installation of 32 watts wall mounted speaker ( Higher end) with suitable supports with connections

Supply and Installation of 500W PA Mixer Amplifier (Higher end)

Supply and Installation of 12U Wall Rack(Higher End)

Supply and Installation of 2U Wall Rack(Higher End)

Supply and Installation of Cordless Mic UHF(Higher End)

Water Supply Arrangements

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.(a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents /Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No. Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact

Supply and providing 1000 litres capacity Priming Tank made up of PVC Make: SINTEX/EQUIVALENT.

Supplying and fixing of SS Drinking water Sink of size 1200 x 550 x 180mm with two taps provisons exculsive of tap cost and waste hose other acccessories etc

Supplying and fixing SS Heavy Duty Long Body Tap 15mm

Supplying and fixing 5 HP / 3 Phase, mono block pump of approved make and quality with ISI mark with necessary accessories and fixed with delivery pipe erected in the bore well with necessary clamp etc., with following additional accessories 1 No of 3 Phase Star Delta Starter of 63 AMPS of approved quality and make with ISI mark 1 No of 3 Phase 63 AMPS Main Switch of approved quality and make with ISI mark. 1 No of priventor of approved quality and make with ISI mark 1 No of panel board of required size with indicator fuse unit voltmeter with necessary provision toaccomodate the starter and mini starter etc. 1 No of capacitor with board as per standards of TNEB M-1065

Supplying and fixing 65mm dia HDPE pipe for sub-mergible pump in Bore well (class-5 1 MPa or 10 Kg / cm2 pressure) of best approved quality including welding wherever necessary etc., complete as directed by the Executive Engineer. The pipe should be got approved by the Executive Engineer before use on works. M-1642

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, SS clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. ( Below Ground Level)

50mm dia

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, SS clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. ( Above Ground Level)

50mm dia

32 mm dia

15 mm dia

Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements

50 mm dia TEE

50 mm dia Elbow

50 mm dia Coupler

50 mm dia Bend

32 mm dia TEE

32 mm dia Elbow

32 mm dia Coupler

32 mm dia Bend

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, SS clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works.

50 mm dia

S J INFRA (BID ID -1376050)