Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹40.0 L+₹21,887 (0.55%)Rejected-AOC | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹41.6 L+₹1.9 L (4.75%)Rejected-AOC PO BUD BUD DIST BURDWAN WEST BENGAL PIN 713 403 | BUD BUD | BURDWAN | WEST BENGAL | 713403 | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 |
Tender Value
₹46.9 L
EMD Value
₹93,800
Closing Date
21 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BoQ
2023_MES_610458_1
8500-006/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a(i) (Building)
6 documents required · 6 mandatory
₹500
₹93,800
Yes
21 Sept 2023
24 Jul 2023
23 Aug 2023
24 Jul 2023
21 Aug 2023
7 Aug 2023
Amount
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed..
Excavation in trenches, n.exc 1.50m wide depth exc. 1.5m and n.exc. 3.0m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
M&L for hardcore of broken stone or boulder of gauge but n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering and complete all as specified and directed.
M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed..
M&L for reinforced cement concrete (Design mix) M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as directed.
All as per Item 7.00 above but in coloums complete all as specified and directed
All as per Item 7.00 above but in beam and lintels complete all as specified and directed..
All as per Item 7.00 above but in chajja complete all as specified and directed
All as per Item 7.00 above but in slabs supported on walls, beams and columns, in roofs and in shelves and the like complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
All as per Item 12.00 above but for coloums complete all as specified and directed.
All as per Item 12.00 above but for chajjas complete all as specified and directed
All as per Item 12.00 above but for sides and sofits of beams and lintels complete all as specified and directed..
All as per Item 12.00 above but for sofits of slab complete all as specified and directed
All as per Item 12.00 above but for side of slab exc 10cm but n.exc 20cm thick complete all as specified and directed
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work, (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed
M&L for cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) 75mm thick as in plinth protectionfinished even and smooth with out using extra cement complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed..
Removing excavated material (soil) n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed..
M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.
M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) complete all as specified and directed.
M&L for brick work with fly ash bricks old size, straight or curved on plan to any radius,in half brick walls built in cement mortar (1:4) complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per Ser No 25.00 above but 6mm to 8mm dia complete all as specified and directed.
All as per Ser No 25.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified and directed.
M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar (1:3) complete all as specified & directed.
M&L for preparation of new plastered surfaces of wall and applying three coats of white wash on walls complete all as specified and directed.
M&L for prepartion of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet trip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
S&F steel ventilators with centre hung shutter (minimum wt. of steel section should be 1.42 M) including two pairs of brasscup pivots, catch spring and pulleywheel, complete dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type complete all as specified and directed.
S&F 100mm long Butt hinges, extruded stainless steel with steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and directed..
M&L for glazed ceramic colour joint free tiles tiles in verticle surface 350x450x7 / 350x250x7mm thick set and jointed in neat cement slurry over and including 10 mm thick 1:3 cement mortar plaster and pointed in coloured cement to match complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors laid over and including 15mm thick 1:6 cement mortar screed bed etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match complete all as specified and directed.. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate 25 mm thick as in floor for receiving screed bed of floor tiling complete all as specified and directed.
M&L for preparation surfaces of steel over 10 cm width or girth and apply of two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.
S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed..
S&F Stop valves 15mm dia CP fency type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L for steel tubes,15mm dia bore 'medium grade' with all fitting; laid in trenches or wall complete all as specified and directed.
M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.
S&F Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing accessories like galvanised brackets & rag bolts complete all as specified and directed
S&F 15mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.
S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) and including waste pipe complete all as specified and directed.
S&F CP Bib taps 15mm dia, with cfancy handle, screwed down, screwed for iron pipe or for brass ferrule, fency type and fixed complete all as specified and directed.
S&F wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and directed.
S&F 10 litre capacity two way flash PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.
S&F Tubular towel rail, 20mm dia, D type, brass chromium plated, 60cm long between flanges complete all as specified and directed.
S&F PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed.
M&L for 15mm thick in CM (1:4) rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound (IWPC Measured and paid seperately) on wall
Supply only intergral water proofing compound (liquid admixture)complete all as specified and directed. (Makes : pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
S&F UPVC Eco Drain pipe drainage sewaer system pipe bearing 160mm dia minimun 4mm thick including jointing with coupler, bend, tee as per site requirement complete laid in trenches or floors complete all as specified and as directed Note: PCC haunching will be measured and paid seperately
M&L for PCC 1:3:6 type C2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes of dia 160mm after they are laid and tested; in complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in benching, haunching complete all as specified and directed.
M&L for 25 Users Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. all as shown in CE's TD Drawings
M&L for soakage well excavation in ordinary soil, foundation in PCC (1:3:6), walls of honey combed masonary with top ring of M-25 Concrete including intercepting chamber ,screen chamber made of brick work in CM, RCC cover slab in M-25/SFRC cover , ,filling with brick bats, complete of size 2.4 m X 3.0 m deep including connection from manhole. complete all as shown in CE's TD Drawings.
M&L for 100 mm thick, Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified and directed..
M&L for sand filling under floor in foundation including watering and consolidation complete all as specified and directed.
M&L for PCC 1:3:6 type C1 as in lintels / beam upto 1.5m clear span, and other similar bands, copings, kneelers, apex stones, bed plates, kerbs and haunching/ benching, water troughs and the like including weathering, slightly rounded or chamfered ang complete all as specified and directed
M&L for machine prepolished pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed.
M&L for 100 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finishing smooth & even with using extra cement all as specified and directed.
S & F glass dividing strips, 3mm thick and 38mm wide and inserted in position to confirm to design all as specified and directed.
Excavation in post holes not exc 0.50 cum, getting out in soft/loose soil , returning filling in and ramming earth, watering and removing surplus soil not exc 50 m in hard dense soil complete all as specified and directed.
M&L for for steel work in tubular Post/columns including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade ST-240, complete all as specified and directed.
M&L Pre-painted galvatume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for Pre-painted galvalume aluminum zinc coating @ 150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping complete all as specified and directed.
M&L for 200 mm thick Kankar or laterite, ( mixing of fly ash, clinker and stone dust in the proportion of of 1:3:6 ie 10% fly ash, 30% clinker and 60% stone dust) spread, rolled and consolidated to gradient and camber required
M&L for 75 mm thick PCC 1:2:4 type B2 (using 40mm graded crushed stone aggregate) as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface even and fair complete
M&L for Chequered prepolished coloured cement concrete tiles 300mm x 300mm x 25mm thick, over & including 15 mm thick cement mortar (1:6) screed, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.
M&L for Cement Concrete , 1:2:4, type B1 (using 20mm graded stone aggregate) as in bed block, coping ,lintel upto 1.50 m span, cills, kerbs etc complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick in CM (1:6) cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.
M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and directed.
M&L for two coats of cement base paint on walls on new plastered surface incl preparing new surface over a coat of chalk whetining complete all as specified and directed.
M&L for damp proof course 40mm thk in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary form work complete all as specified and directed.
M&L for rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:3), complete all as specified and directed.
M&L for two coats of Oil bound destemper distempering on new wall surface including cement primer preparation to distempering complete all as specified.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed.
M&L for non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed complete all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust withadmixture of pigment to match with shade of granite complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed..
S&F reinforced concrete pipes, class NP2, laid and jointed complete with collars 600mm dia complete all as specified and directed.
M&L for 600mm dia plain cement Concrete bed !:3:6 type C2 using 40mm stone aggregate as in to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed
S&F joist, channel, angle,or tee sections,fixed independently,without connecting plates, etc. (cut to ordinary length i.e within 20mm of the lenth indicated complete all as specified and directed.
M&L for cutting holes into or through in brick walls built in cement mortar making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required super facial area n.exc 150Sqcm complete all as specified and directed.
S&F anodised aluminium snap grid (605X605mm ) frame work for false ceiling with all necessary aluminium angle & Tee aeeangement with and incl fixing cleats ,complete all as specified and directed.
M&L for hanger 6mm dia G.I (upto 1200 mm length) adjusted level fixed to roof truss by means of ceilling cleat made out of GI flat 40x3 mm size 60mm long and expansion hold fastener 12.5 mm dia 40 mm long complete all as specified and directed.
S&F for 6 mm thick 'E' board (non asbestos fibre) designer building boards fixed in aluminum frame work in ceiling flat or sloping with screws,complete all as specified and directed.
E/M PORTION S&F Pipes galvanized, 25 mm bore “Medium grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified complete all as specified and directed.
S&F gun mtal , gate valve, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fix complete all as specified and directed.
S&F gun mtal , gate valve, 20 mm dia with iron wheel head, screwed both ends for iron pipe and fix complete all as specified and directed.
S&F capacity 750 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top, minimum three layer) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge Make: Sintex/Prayag/Vectus
S&F high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 20 mm dia with fly nut complete all as specified and directed.
M&L for cutting existing steel tubing for alternation or addition of size 40 to 50 mm dia GI pipe complete all as specified and directed.
M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No. 107.00 above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed.
All as per item No.107.00 above but 5 Amp socket out let on same board with other switches complete all as specified and directed.
M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC Cassing capping/ conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. Make :Plaza,polycab,havells.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.
S&F socket outlets 2 in 1, 5 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed .( For Same Board only)
S&F switch socket combination 5 in 1, 6 pin, (5/16 Amps ) flush type controlled by one switch complete all as specified.
S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .
S&F LED light fitting 1 x 20 watt box type with same make LED tube rod side connection AC decorative boxype 4' long wih driver, holder including LED tube connecting up with complete all accessories andconnection from ceiling rose with twin core twisted flexible copper conductor cable withsuitable size and earthing complete all as specified and directed.
S&F wall LED security light fittings 25 watt, 230 volts, minimum lumn output 100 lumen/watt, made up ofpressure dia cast housing with prismatic polycarbonate difuser and industrial LED with secondary optic and IP-65/66 including neccessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete allas specified and directed.
S&F LED battem mirror light fitting 1 x 10 watt box type, Polycarbonate, cool day light, 6500K,1000 lumens with accessories complete all as specified and directed.
S&F lamp holder, PVC/polycarbomate type with back plate straoght of angle suitable for LED lamp complete all as specified and directed
S&F submen two single core 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed. (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necesasry chasing, cutting and making good as per existing specification).)
S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed.
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.
S&F ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed. Make: Usha/Havells/Bajaj/CG
Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, aarmoured heavy duty electric cable with aluminium conductor , 1100 vlts grade , crsectional area 16 sqmm 2 core complete all as specified and directed Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely.
M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness 18 cm shall only be considered for payment
Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.
S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.
S&F hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating of capacity 1.5 TR, ISI marked. Make:-Voltas/Blue Star/Carrier.
S&F hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating of capacity 2.0 TR, ISI marked. Make:-Voltas/Blue Star/Carrier.
S&F Aone wall mounted Heavy duty Air conditioner outdoor unit AC stand upto 2 ton self bracket (Made by Iron with powder coatet painted).
S&F copper wound wall mounted Voltage Stabilizer for automatic operation single phase neaturally air cooled indoor type & designed for input variation between 140V to 270V with output Voltage Stabilizer at 220V to 240V with accuracy of + 2% and of capacity of 4 KVA complete all as specified and directed. Make:- V-Guard, Sen & Pandit
S&F copper wound wall mounted Voltage Stabilizer for automatic operation single phase neaturally air cooled indoor type & designed for input variation between 140V to 270V with output Voltage Stabilizer at 220V to 240V with accuracy of + 2% and of capacity of 5 KVA complete all as specified and directed Make:- V-Guard, Sen & Pandit
M&L for Wiring for circuit/submain Wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 4 Sqmm and one 4.0 Sqmm PVC insulated FRLSH cable with stranded copper conductor drawing into and including PVC Casing caping complete all as specified. (Note: Three runs cable and PVC casing caping will be measured as a single unit).
M&L for Wiring for circuit/submain Wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 6.0 Sqmm and one 4.0 Sqmm PVC insulated FRLSH cable with stranded copper conductor drawing into and including PVC Casing caping complete all as specified. (Note: Three runs cable and PVC casing caping will be measured as a single unit)
M&L for Sub main Wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 10 Sqmm and one 6.0 Sqmm PVC insulated FRLSH cable with stranded copper conductor drawing into and including PVC Casing caping complete all as specified. (Note: Three runs cable and PVC casing caping will be measured as a single unit).
S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.
S&F MCB SPN 40 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed (Note : Proper size of cu. lugs / themble is deemed included in quoted rate)
S&F epoxy powder coated sheet metal enclosure for DBs, single door, Single pole and neutral 240 V, 20-32 Amps with earth plug complete all as specified and directed
S&F XLPE armoured cable 10 sqmm 4 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as sepcified. (Note : Both end of cable lug / themble, cable gland and GI saddle is deemed included in quoted rate)
M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete as specified and directed.
S&F Pipes galvanized, 40 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed .( For Same Board only)
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote complete all as specified and directed Make: Usha/Havells/Bajaj/CG
S&F LED panel Deco base light CCT 3000K luminaire General purpose recessed mounted baselight comprises of CRCA housing with drop down diffuser cut out dimension (mm) 575x575 (LxBxH) 595x595x97mm fof colour (WW) 36 watt with high transmitive diffuser suitable for indoor space complete all as specified and directed
M/S Dey Construction
ROY ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .